Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 23 May 2009 15:57:33 -0400
From:      Nicolas Blais <nicblais@clkroot.net>
To:        Willem Jan Withagen <wjw@digiware.nl>
Cc:        freebsd-current@freebsd.org
Subject:   Re: syslogd starting before IPv6 network is up
Message-ID:  <7061d9f50905231257n29d9e75ehb827ffdc9c077353@mail.gmail.com>
In-Reply-To: <4A1853A7.8080606@digiware.nl>
References:  <7061d9f50905230958n5fd7d434t790a964e79511d6b@mail.gmail.com> <4A1853A7.8080606@digiware.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, May 23, 2009 at 3:51 PM, Willem Jan Withagen <wjw@digiware.nl>wrote:

> Nicolas Blais wrote:
>
>> I migrated one of my 8-CURRENT (Thu May 21) box to IPv6 and since then, I
>> get the following message at boot:
>>
>> syslogd: bind: Can't assign requested address
>> syslogd: bind: Can't assign requested address
>> syslogd:
>> child pid 250 exited with return code 1
>>
>> and syslogd obviously fails to start. Apparently this problem has been
>> reported before, but no actual solution other than start syslogd from
>> rc.local was given.
>>
>
> It is not because  net.inet6.ip6.v6only is off?
>
> Because than you otherwise get ip4 in ip6 mapping.
> It should be of in recent releases, but in 5.x I remember it being on.
>
> --WjW
>
>
Perhaps you are right, but that interface requires ip4 to connect to the
tunnel broker and become ip6-capable. I don't understand why that sysctl
should have an effect on the rcorder. I checked and net.inet6.ip6.v6only: 1

Here's my dmesg:

/etc/rc: WARNING: failed to start syslogd
Starting Network: lo0 em0.
May 22 15:59:53 pflogd[620]: [priv]: msg PRIV_OPEN_LOG received
pf enabled
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
net.inet6.ip6.forwarding:
0
 ->
1

net.inet6.ip6.accept_rtadv:
0
 ->
0

em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
        inet6 fe80::221:9bff:fe34:a235%em0 prefixlen 64 scopeid 0x1
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9<RXCSUM,VLAN_MTU>
        inet6 fe80::20a:5eff:fe20:c915%xl0 prefixlen 64 scopeid 0x2
plip0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
pfsync0: flags=41<UP,RUNNING> metric 0 mtu 1460
add net fe80::: gateway ::1
add net ff02::: gateway ::1
IPv4 mapped IPv6 address support=NO
Configuring keyboard:
 keymap
.
DHCPREQUEST on em0 to 255.255.255.255 port 67

DHCPACK from 192.168.15.1

bound to 192.168.15.58 -- renewal in 1800 seconds.

Nicolas



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7061d9f50905231257n29d9e75ehb827ffdc9c077353>