Date: Mon, 8 Aug 2005 21:37:39 +0100 From: Joao Barros <joao.barros@gmail.com> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-current@freebsd.org, Mike Tancsa <mike@sentex.net> Subject: Re: 6.0-CURRENT SNAP004 hangs on amr (patch) Message-ID: <70e8236f05080813372e406f44@mail.gmail.com> In-Reply-To: <200508081311.51857.jhb@FreeBSD.org> References: <70e8236f05070208212e36c375@mail.gmail.com> <200507291318.24428.jhb@FreeBSD.org> <70e8236f050807192628b0405e@mail.gmail.com> <200508081311.51857.jhb@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 8/8/05, John Baldwin <jhb@freebsd.org> wrote: > On Sunday 07 August 2005 10:26 pm, Joao Barros wrote: > > On 7/29/05, John Baldwin <jhb@freebsd.org> wrote: > > > On Sunday 24 July 2005 07:16 pm, Joao Barros wrote: > > > > Would it be possible to have this in BETA2? > > > > > > Can you try this patch? You'll need to set hw.apic.enable_extint=3D1= in > > > the loader via loader.conf or a manual set command: > > > > John, > > > > I saw you commited this to RELENG_6 and today, finally I got the time > > to install 5.4 on the machine, as it was systemless, cvsup to RELENG_6 > > and build a kernel. > > I'm sorry to report that setting hw.apic.enable_extint to 1 didn't > > work. I tried to boot with and without acpi. > > > > It takes me almost 2 hours to compile a kernel on this machine, but > > I'm now in condition to test anything you throw at me :) > > > > Note: I booted from the (now on) internal ahc >=20 > Ok, so I'm assuming that 5.4 works but RELENG_6 does not? Do you have ve= rbose > dmesg's from both cases so that I can compare them? >=20 > -- > John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ > "Power Users Use the Power to Serve" =3D http://www.FreeBSD.org >=20 Here is a boot -v -h for 5.4 and 6.0: SMAP type=3D01 base=3D0000000000000000 len=3D000000000009fc00 SMAP type=3D02 base=3D000000000009fc00 len=3D0000000000000400 SMAP type=3D02 base=3D00000000000e0000 len=3D0000000000020000 SMAP type=3D01 base=3D0000000000100000 len=3D000000000fde0000 SMAP type=3D03 base=3D000000000fee0000 len=3D0000000000018000 SMAP type=3D04 base=3D000000000fef8000 len=3D0000000000008000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =09The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e6e000. Preloaded mfs_root "/boot/mfsroot" at 0xc0e6e22c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e6e270. Table 'FACP' at 0xfef1000 MADT: No MADT table found APIC: Could not find any APICs. Calibrating clock(s) ... i8254 clock: 1193163 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 735002624 Hz CPU: Intel Pentium III (735.00-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMO V,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 267255808 (254 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000000fa34fff, 245432320 bytes (59920 pages) avail memory =3D 247787520 (236 MB) bios32: Found BIOS32 Service Directory header at 0xc00fdb70 bios32: Entry =3D 0xfdb80 (c00fdb80) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xdba1 pnpbios: Found PnP BIOS data at 0xc00f3200 pnpbios: Entry =3D f0000:24d4 Rev =3D 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: < INTEL SOLANO70> on motherboard acpi0: [MPSAFE] pci_open(1):=09mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a):=09mode1res=3D0x80000000 (0x80000000) pci_cfgcheck:=09device 0 [class=3D060000] [hdr=3D00] is there (id=3D1130808= 6) pcibios: BIOS version 2.10 Found $PIR table, 12 entries at 0xc00f3790 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 1 8 A 0x68 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 B 0x61 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 D 0x63 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 B 0x62 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 C 0x63 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 D 0x60 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 D 0x61 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 A 0x63 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 B 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 C 0x61 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 D 0x62 3 4 5 7 9 10 11 12 14 15 slot 5 1 4 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 6 1 5 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 6 1 5 B 0x62 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 3 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 ACPI timer: 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x410 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \_SB_.PCI0.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.31.0 \_SB_.PCI0.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 3+ low,level,sharable 0.31.1 \_SB_.PCI0.LNKH irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+ low,level,sharable 0.31.2 \_SB_.PCI0.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 7+ low,level,sharable 0.31.3 \_SB_.PCI0.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.1.0 \_SB_.PCI0.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 3+ low,level,sharable 0.1.1 \_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 0.1.2 \_SB_.PCI0.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 7+ low,level,sharable 0.1.3 \_SB_.PCI0.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 0.2.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 found->=09vendor=3D0x8086, dev=3D0x1130, revid=3D0x02 =09bus=3D0, slot=3D0, func=3D0 =09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09map[10]: type 3, range 32, base f8000000, size 26, enabled =09map[14]: type 1, range 32, base ffa80000, size 19, enabled pcib0: matched entry for 0.2.INTA (src \_SB_.PCI0.LNKA) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15 ACPI PCI link arbitrated settings: \_SB_.PCI0.LNKA (references 3, priority 34399): =09interrupts:=09 11 10 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 90 90 140 180 5090 5090 5090 5090 5090 50 090 50090 \_SB_.PCI0.LNKB (references 2, priority 22932): =09interrupts:=09 11 10 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 90 90 140 180 5090 5090 5090 5090 5090 50 090 50090 \_SB_.PCI0.LNKD (references 2, priority 22932): =09interrupts:=09 11 10 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 90 90 140 180 5090 5090 5090 5090 5090 50 090 50090 \_SB_.PCI0.LNKH (references 1, priority 11466): =09interrupts:=09 11 10 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 90 90 140 180 5090 5090 5090 5090 5090 50 090 50090 \_SB_.PCI0.LNKC (references 1, priority 11466): =09interrupts:=09 11 10 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 90 90 140 180 5090 5090 5090 5090 5090 50 090 50090 pcib0: slot 2 INTA routed to irq 11 via \_SB_.PCI0.LNKA found->=09vendor=3D0x8086, dev=3D0x1132, revid=3D0x02 =09bus=3D0, slot=3D2, func=3D0 =09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Da, irq=3D11 =09powerspec 2 supports D0 D3 current D0 found->=09vendor=3D0x8086, dev=3D0x244e, revid=3D0x02 =09bus=3D0, slot=3D30, func=3D0 =09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 =09cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found->=09vendor=3D0x8086, dev=3D0x2440, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D0 =09class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 =09cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found->=09vendor=3D0x8086, dev=3D0x244b, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D1 =09class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09map[20]: type 4, range 32, base 0000ef40, size 5, enabled pcib0: matched entry for 0.31.INTD (src \_SB_.PCI0.LNKD) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15 ACPI PCI link arbitrated settings: \_SB_.PCI0.LNKB (references 2, priority 23134): =09interrupts:=09 10 11 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 180 210 230 360 5180 5180 5180 5180 5180 50 180 50180 \_SB_.PCI0.LNKD (references 2, priority 23134): =09interrupts:=09 10 11 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 180 210 230 360 5180 5180 5180 5180 5180 50 180 50180 \_SB_.PCI0.LNKH (references 1, priority 11567): =09interrupts:=09 10 11 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 180 210 230 360 5180 5180 5180 5180 5180 50 180 50180 \_SB_.PCI0.LNKC (references 1, priority 11567): =09interrupts:=09 10 11 5 9 12 7 6 4 3 = =20 15 14 =09penalty:=09 180 210 230 360 5180 5180 5180 5180 5180 50 180 50180 pcib0: slot 31 INTD routed to irq 7 via \_SB_.PCI0.LNKD found->=09vendor=3D0x8086, dev=3D0x2442, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D2 =09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Dd, irq=3D7 =09map[20]: type 4, range 32, base 0000efa0, size 4, enabled pcib0: matched entry for 0.31.INTB (src \_SB_.PCI0.LNKB) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15 ACPI PCI link arbitrated settings: \_SB_.PCI0.LNKB (references 2, priority 23334): =09interrupts:=09 10 11 5 9 12 6 4 3 7 = =20 15 14 =09penalty:=09 270 300 320 540 5270 5270 5270 5270 5290 50 270 50270 \_SB_.PCI0.LNKH (references 1, priority 11667): =09interrupts:=09 10 11 5 9 12 6 4 3 7 = =20 15 14 =09penalty:=09 270 300 320 540 5270 5270 5270 5270 5290 50 270 50270 \_SB_.PCI0.LNKC (references 1, priority 11667): =09interrupts:=09 10 11 5 9 12 6 4 3 7 = =20 15 14 =09penalty:=09 270 300 320 540 5270 5270 5270 5270 5290 50 270 50270 pcib0: slot 31 INTB routed to irq 3 via \_SB_.PCI0.LNKB found->=09vendor=3D0x8086, dev=3D0x2443, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D3 =09class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Db, irq=3D3 =09map[20]: type 4, range 32, base 0000ef80, size 5, enabled pcib0: matched entry for 0.31.INTC (src \_SB_.PCI0.LNKH) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15 ACPI PCI link arbitrated settings: \_SB_.PCI0.LNKH (references 1, priority 11767): =09interrupts:=09 10 11 5 9 12 6 4 7 3 = =20 15 14 =09penalty:=09 360 390 410 720 5360 5360 5360 5380 5380 50 360 50360 \_SB_.PCI0.LNKC (references 1, priority 11767): =09interrupts:=09 10 11 5 9 12 6 4 7 3 = =20 15 14 =09penalty:=09 360 390 410 720 5360 5360 5360 5380 5380 50 360 50360 pcib0: slot 31 INTC routed to irq 5 via \_SB_.PCI0.LNKH found->=09vendor=3D0x8086, dev=3D0x2444, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D4 =09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Dc, irq=3D5 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xffa80000-0xffafffff,0xf8000 000-0xfbffffff irq 11 at device 2.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xffa80000 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0xa000-0xdfff pcib1: memory decode 0xff200000-0xff8fffff pcib1: prefetched decode 0xee800000-0xf6afffff pcib1: Subtractively decoded bridge. ACPI PCI link initial configuration: \_SB_.PCI0.LNKE irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 1.8.0 \_SB_.PCI0.LNKA irq*11: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 1.0.0 \_SB_.PCI0.LNKB irq* 3: [ 3 4 5 6 7 9 10 11 12 14 15] 3+ low,level,sharable 1.0.1 \_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 1.0.2 \_SB_.PCI0.LNKD irq* 7: [ 3 4 5 6 7 9 10 11 12 14 15] 7+ low,level,sharable 1.0.3 \_SB_.PCI0.LNKB irq* 3: [ 3 4 5 6 7 9 10 11 12 14 15] 3+ low,level,sharable 1.1.0 \_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 1.1.1 \_SB_.PCI0.LNKD irq* 7: [ 3 4 5 6 7 9 10 11 12 14 15] 7+ low,level,sharable 1.1.2 \_SB_.PCI0.LNKA irq*11: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 1.1.3 \_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 1.2.0 \_SB_.PCI0.LNKD irq* 7: [ 3 4 5 6 7 9 10 11 12 14 15] 7+ low,level,sharable 1.2.1 \_SB_.PCI0.LNKA irq*11: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 1.2.2 \_SB_.PCI0.LNKB irq* 3: [ 3 4 5 6 7 9 10 11 12 14 15] 3+ low,level,sharable 1.2.3 \_SB_.PCI0.LNKD irq* 7: [ 3 4 5 6 7 9 10 11 12 14 15] 7+ low,level,sharable 1.3.0 \_SB_.PCI0.LNKA irq*11: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 1.3.1 \_SB_.PCI0.LNKB irq* 3: [ 3 4 5 6 7 9 10 11 12 14 15] 3+ low,level,sharable 1.3.2 \_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 1.3.3 \_SB_.PCI0.LNKA irq*11: [ 3 4 5 6 7 9 10 11 12 14 15] 11+ low,level,sharable 1.4.0 \_SB_.PCI0.LNKB irq* 3: [ 3 4 5 6 7 9 10 11 12 14 15] 3+ low,level,sharable 1.5.0 \_SB_.PCI0.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+ low,level,sharable 1.5.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=3D1 found->=09vendor=3D0x8086, dev=3D0xb154, revid=3D0x00 =09bus=3D1, slot=3D2, func=3D0 =09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 =09cmdreg=3D0x0107, statreg=3D0x02b0, cachelnsz=3D0 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) =09map[10]: type 1, range 32, base ff8fc000, size 12, enabled pcib1: device (null) requested decoded memory range 0xff8fc000-0xff8fcfff =09map[14]: type 4, range 32, base 0000c800, size 6, enabled pcib1: device (null) requested decoded I/O range 0xc800-0xc83f =09map[18]: type 1, range 32, base ff600000, size 20, enabled pcib1: device (null) requested decoded memory range 0xff600000-0xff6fffff pcib1: matched entry for 1.3.INTA (src \_SB_.PCI0.LNKD) pcib1: slot 3 INTA is already routed to irq 7 found->=09vendor=3D0x8086, dev=3D0x1229, revid=3D0x08 =09bus=3D1, slot=3D3, func=3D0 =09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000= ns) =09intpin=3Da, irq=3D7 =09powerspec 2 supports D0 D1 D2 D3 current D0 =09map[10]: type 1, range 32, base ff8fd000, size 12, enabled pcib1: device (null) requested decoded memory range 0xff8fd000-0xff8fdfff =09map[14]: type 4, range 32, base 0000d000, size 6, enabled pcib1: device (null) requested decoded I/O range 0xd000-0xd03f =09map[18]: type 1, range 32, base ff700000, size 20, enabled pcib1: device (null) requested decoded memory range 0xff700000-0xff7fffff pcib1: matched entry for 1.4.INTA (src \_SB_.PCI0.LNKA) pcib1: slot 4 INTA is already routed to irq 11 found->=09vendor=3D0x8086, dev=3D0x1229, revid=3D0x08 =09bus=3D1, slot=3D4, func=3D0 =09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000= ns) =09intpin=3Da, irq=3D11 =09powerspec 2 supports D0 D1 D2 D3 current D0 =09map[10]: type 4, range 32, base 0000d400, size 8, enabled pcib1: device (null) requested decoded I/O range 0xd400-0xd4ff =09map[14]: type 1, range 64, base ff8fe000, size 12, enabled pcib1: device (null) requested decoded memory range 0xff8fe000-0xff8fefff pcib1: matched entry for 1.5.INTA (src \_SB_.PCI0.LNKB) pcib1: slot 5 INTA is already routed to irq 3 found->=09vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01 =09bus=3D1, slot=3D5, func=3D0 =09class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1 =09cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250= ns) =09intpin=3Da, irq=3D3 =09powerspec 2 supports D0 D3 current D0 =09map[10]: type 4, range 32, base 0000d800, size 8, enabled pcib1: device (null) requested decoded I/O range 0xd800-0xd8ff =09map[14]: type 1, range 64, base ff8ff000, size 12, enabled pcib1: device (null) requested decoded memory range 0xff8ff000-0xff8fffff pcib1: matched entry for 1.5.INTB (src \_SB_.PCI0.LNKC) pcib1: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15 ACPI PCI link arbitrated settings: \_SB_.PCI0.LNKC (references 6, priority 73009): =09interrupts:=09 10 11 5 9 12 6 4 7 3 = =20 15 14 =09penalty:=09 760 790 820 1120 5760 5760 5760 5780 5780 50 760 50760 \_SB_.PCI0.LNKE (references 1, priority 12168): =09interrupts:=09 10 11 5 9 12 6 4 7 3 = =20 15 14 =09penalty:=09 760 790 820 1120 5760 5760 5760 5780 5780 50 760 50760 pcib1: slot 5 INTB routed to irq 10 via \_SB_.PCI0.LNKC found->=09vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01 =09bus=3D1, slot=3D5, func=3D1 =09class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1 =09cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250= ns) =09intpin=3Db, irq=3D10 =09powerspec 2 supports D0 D3 current D0 pcib2: <PCI-PCI bridge> at device 2.0 on pci1 pcib2: secondary bus 2 pcib2: subordinate bus 3 pcib2: I/O decode 0xa000-0xbfff pcib2: memory decode 0xff200000-0xff3fffff pcib2: prefetched decode 0xee800000-0xf69fffff pci2: <PCI bus> on pcib2 pci2: physical bus=3D2 found->=09vendor=3D0x8086, dev=3D0xb154, revid=3D0x00 =09bus=3D2, slot=3D0, func=3D0 =09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 =09cmdreg=3D0x0107, statreg=3D0x0290, cachelnsz=3D0 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) =09map[10]: type 4, range 32, base 0000b800, size 8, enabled pcib2: device (null) requested decoded I/O range 0xb800-0xb8ff pcib1: device (null) requested decoded I/O range 0xb800-0xb8ff =09map[14]: type 1, range 32, base ff3ff000, size 12, enabled pcib2: device (null) requested decoded memory range 0xff3ff000-0xff3fffff pcib1: device (null) requested decoded memory range 0xff3ff000-0xff3fffff pcib1: matched entry for 1.2.INTB (src \_SB_.PCI0.LNKD) pcib1: slot 2 INTB is already routed to irq 7 pcib2: slot 1 INTA is routed to irq 7 found->=09vendor=3D0x1077, dev=3D0x1216, revid=3D0x06 =09bus=3D2, slot=3D1, func=3D0 =09class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns= ) =09intpin=3Da, irq=3D7 =09powerspec 1 supports D0 D3 current D0 pcib3: <PCI-PCI bridge> at device 0.0 on pci2 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xa000-0xafff pcib3: memory decode 0xff200000-0xff2fffff pcib3: prefetched decode 0xee800000-0xf68fffff pci3: <PCI bus> on pcib3 pci3: physical bus=3D3 =09map[10]: type 3, range 32, base f0000000, size 26, enabled pcib3: device (null) requested decoded memory range 0xf0000000-0xf3ffffff pcib2: device (null) requested decoded memory range 0xf0000000-0xf3ffffff pcib1: device (null) requested decoded memory range 0xf0000000-0xf3ffffff pcib1: matched entry for 1.2.INTA (src \_SB_.PCI0.LNKC) pcib1: slot 2 INTA is already routed to irq 10 pcib2: slot 0 INTA is routed to irq 10 pcib3: slot 0 INTA is routed to irq 10 found->=09vendor=3D0x101e, dev=3D0x1960, revid=3D0x20 =09bus=3D3, slot=3D0, func=3D0 =09class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0116, statreg=3D0x0290, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Da, irq=3D10 =09powerspec 2 supports D0 D3 current D0 amr0: <LSILogic MegaRAID 1.51> mem 0xf0000000-0xf3ffffff irq 10 at device 0.0 on pci3 amr0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf0000000 amr0: [MPSAFE] amr0: <LSILogic PERC 3/DC> Firmware 198U, BIOS 3.35, 64MB RAM pci2: <mass storage, SCSI> at device 1.0 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xc800-0xc83f mem 0xff600000-0xff6fffff ,0xff8fc000-0xff8fcfff irq 7 at device 3.0 on pci1 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff8fc000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 100c 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:30:48:11:2d:f5 fxp0: [MPSAFE] fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xff700000-0xff7fffff ,0xff8fd000-0xff8fdfff irq 11 at device 4.0 on pci1 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff8fd000 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 8086 100c 0008 fxp1: Dynamic Standby mode is disabled miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:30:48:11:2d:f4 fxp1: [MPSAFE] ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd400-0xd4ff mem 0xff8fe000-0 xff8fefff irq 3 at device 5.0 on pci1 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd400 ahc0: Reading SEEPROM...done. ahc0: Manual SE Termination ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 423 instructions downloaded ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x20485560 ahc0: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xff8ff000-0 xff8fffff irq 10 at device 5.1 on pci1 ahc1: Defaulting to MEMIO off ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 ahc1: Reading SEEPROM...done. ahc1: Manual SE Termination ahc1: Manual LVD Termination ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 423 instructions downloaded ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x28485560 ahc1: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3 f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0-master: stat=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D10 stat1=3D00 devices=3D0x4<ATAPI_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 ata1-master: stat=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 ata1-slave: stat=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 ata1: reset tp2 stat0=3D01 stat1=3D01 devices=3D0x0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 a t device 31.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef40 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 5 a t device 31.4 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef80 uhci1: [GIANT-LOCKED] usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered acpi_button0: <Sleep Button> on acpi0 unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A, console unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 735002624 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09dde24 fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin GEOM: Configure md0a, start 0 length 4423680 end 4423679 GEOM: Configure md0c, start 0 length 4423680 end 4423679 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 ata0-master: setting PIO4 on Intel ICH2 chip acd0: <HL-DT-ST GCE-8520B/1.03> CDRW drive at ata0 as master acd0: read 6890KB/s (6890KB/s) write 1722KB/s (1722KB/s), 2048KB buffer, PI= O4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 104040MB (213073920 sectors) RAID 5 (optimal) GEOM: new disk amrd0 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:142046667 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure amrd0s1, start 32256 length 72727893504 end 72727925759 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure amrd0s1a, start 0 length 268435456 end 268435455 GEOM: Configure amrd0s1b, start 268435456 length 239804416 end 508239871 GEOM: Configure amrd0s1c, start 0 length 72727893504 end 72727893503 GEOM: Configure amrd0s1d, start 508239872 length 268435456 end 776675327 GEOM: Configure amrd0s1e, start 776675328 length 268435456 end 1045110783 GEOM: Configure amrd0s1f, start 1045110784 length 71682782720 end 727278935= 03 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 (probe2:amr0:0:2:0): error 22 (probe2:amr0:0:2:0): Unretryable Error (probe17:amr0:1:2:0): error 22 (probe17:amr0:1:2:0): Unretryable Error (probe3:amr0:0:3:0): error 22 (probe3:amr0:0:3:0): Unretryable Error (probe18:amr0:1:3:0): error 22 (probe18:amr0:1:3:0): Unretryable Error (probe4:amr0:0:4:0): error 22 (probe4:amr0:0:4:0): Unretryable Error (probe22:amr0:1:8:0): error 22 (probe22:amr0:1:8:0): Unretryable Error (probe5:amr0:0:5:0): error 22 (probe5:amr0:0:5:0): Unretryable Error (probe23:amr0:1:9:0): error 22 (probe23:amr0:1:9:0): Unretryable Error (probe9:amr0:0:10:0): error 22 (probe9:amr0:0:10:0): Unretryable Error (probe24:amr0:1:10:0): error 22 (probe24:amr0:1:10:0): Unretryable Error (probe10:amr0:0:11:0): error 22 (probe10:amr0:0:11:0): Unretryable Error (probe25:amr0:1:11:0): error 22 (probe25:amr0:1:11:0): Unretryable Error (probe11:amr0:0:12:0): error 22 (probe11:amr0:0:12:0): Unretryable Error (probe26:amr0:1:12:0): error 22 (probe26:amr0:1:12:0): Unretryable Error (probe12:amr0:0:13:0): error 22 (probe12:amr0:0:13:0): Unretryable Error (probe27:amr0:1:13:0): error 22 (probe27:amr0:1:13:0): Unretryable Error (probe13:amr0:0:14:0): error 22 (probe13:amr0:0:14:0): Unretryable Error (probe28:amr0:1:14:0): error 22 (probe28:amr0:1:14:0): Unretryable Error (probe14:amr0:0:15:0): error 22 (probe14:amr0:0:15:0): Unretryable Error (probe29:amr0:1:15:0): error 22 (probe29:amr0:1:15:0): Unretryable Error (probe6:amr0:0:6:0): error 22 (probe6:amr0:0:6:0): Unretryable Error (probe19:amr0:1:4:0): error 22 (probe19:amr0:1:4:0): Unretryable Error (probe7:amr0:0:8:0): error 22 (probe7:amr0:0:8:0): Unretryable Error (probe20:amr0:1:5:0): error 22 (probe20:amr0:1:5:0): Unretryable Error (probe8:amr0:0:9:0): error 22 (probe8:amr0:0:9:0): Unretryable Error (probe0:amr0:0:0:0): error 22 (probe0:amr0:0:0:0): Unretryable Error (probe21:amr0:1:6:0): error 22 (probe21:amr0:1:6:0): Unretryable Error (probe1:amr0:0:1:0): error 22 (probe1:amr0:0:1:0): Unretryable Error (probe16:amr0:1:1:0): error 22 (probe16:amr0:1:1:0): Unretryable Error (probe15:amr0:1:0:0): error 22 (probe15:amr0:1:0:0): Unretryable Error ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc1: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc1: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:0. 0 SCBs aborted ahc1: Selection Timeout on A:0. 0 SCBs aborted ahc0: Selection Timeout on A:1. 0 SCBs aborted (ahc0:A:4:0): Received WDTR 1 filtered to 0 (ahc0:A:4:0): Target Initiated WDTR (ahc0:A:4:0): Sending WDTR 0 ahc0: target 4 using 8bit transfers ahc1: Selection Timeout on A:1. 0 SCBs aborted (ahc0:A:4:0): Received SDTR period a, offset 1f =09Filtered to period 0, offset 0 ahc0: target 4 using asynchronous transfers (ahc0:A:4:0): Target Initiated SDTR (ahc0:A:4:0): Sending SDTR period 45, offset 0 ahc1: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:5. 0 SCBs aborted ahc1: Selection Timeout on A:5. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted ahc1: Selection Timeout on A:6. 0 SCBs aborted ahc0: Selection Timeout on A:8. 0 SCBs aborted ahc1: Selection Timeout on A:8. 0 SCBs aborted ahc0: Selection Timeout on A:9. 0 SCBs aborted ahc1: Selection Timeout on A:9. 0 SCBs aborted ahc0: Selection Timeout on A:10. 0 SCBs aborted ahc1: Selection Timeout on A:10. 0 SCBs aborted ahc0: Selection Timeout on A:11. 0 SCBs aborted ahc1: Selection Timeout on A:11. 0 SCBs aborted ahc0: Selection Timeout on A:12. 0 SCBs aborted ahc1: Selection Timeout on A:12. 0 SCBs aborted ahc0: Selection Timeout on A:13. 0 SCBs aborted ahc1: Selection Timeout on A:13. 0 SCBs aborted ahc0: Selection Timeout on A:14. 0 SCBs aborted ahc1: Selection Timeout on A:14. 0 SCBs aborted ahc0: Selection Timeout on A:15. 0 SCBs aborted (probe34:ahc0:0:4:0): Retrying Command ahc1: Selection Timeout on A:15. 0 SCBs aborted (ahc0:A:4:0): Sending WDTR 1 (ahc0:A:4:0): Received WDTR 1 filtered to 1 ahc0: target 4 using 16bit transfers (ahc0:A:4:0): Sending SDTR period a, offset 7f (ahc0:A:4:0): Received SDTR period a, offset 1f =09Filtered to period a, offset 1f ahc0: target 4 synchronous at 40.0MHz, offset =3D 0x1f pass0 at ahc0 bus 0 target 4 lun 0 pass0: <WDIGTL WDE9150 ULTRA2 1.30> Fixed Direct Access SCSI-2 device=20 pass0: Serial Number WM7101006973 =20 pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit) da0 at ahc0 bus 0 target 4 lun 0 da0: <WDIGTL WDE9150 ULTRA2 1.30> Fixed Direct Access SCSI-2 device=20 da0: Serial Number WM7101006973 =20 da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit) da0: 8727MB (17873040 512 byte sectors: 255H 63S/T 1112C) GEOM: new disk da0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17864217 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 9146479104 end 9146511359 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure da0s1a, start 0 length 268435456 end 268435455 GEOM: Configure da0s1b, start 268435456 length 508239872 end 776675327 GEOM: Configure da0s1c, start 0 length 9146479104 end 9146479103 GEOM: Configure da0s1d, start 776675328 length 268435456 end 1045110783 GEOM: Configure da0s1e, start 1045110784 length 268435456 end 1313546239 GEOM: Configure da0s1f, start 1313546240 length 7832932864 end 9146479103 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 Mounting root from ufs:/dev/md0 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. 2 ...................... VT100 or compatible terminal. 3 ...................... FreeBSD system console (color). 4 ...................... FreeBSD system console (monochrome). 5 ...................... xterm terminal emulator. Your choice: (1-5)=20 FreeBSD 6.0 cvs'ed 7-8-2005 GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb SMAP type=3D01 base=3D0000000000000000 len=3D000000000009fc00 SMAP type=3D02 base=3D000000000009fc00 len=3D0000000000000400 SMAP type=3D02 base=3D00000000000e0000 len=3D0000000000020000 SMAP type=3D01 base=3D0000000000100000 len=3D000000000fde0000 SMAP type=3D03 base=3D000000000fee0000 len=3D0000000000018000 SMAP type=3D04 base=3D000000000fef8000 len=3D0000000000008000 SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000 SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =09The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA2 #0: Mon Aug 8 01:36:10 WEST 2005 root@AMR.bsdtech.org:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ad9000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ad922c. Calibrating clock(s) ... i8254 clock: 1193166 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 735005322 Hz CPU: Intel Pentium III (735.01-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3 Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMO V,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 267255808 (254 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000000fa2cfff, 249581568 bytes (60933 pages) avail memory =3D 251994112 (240 MB) Table 'FACP' at 0xfef1000 MADT: No MADT table found APIC: Could not find any APICs. bios32: Found BIOS32 Service Directory header at 0xc00fdb70 bios32: Entry =3D 0xfdb80 (c00fdb80) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xdba1 pnpbios: Found PnP BIOS data at 0xc00f3200 pnpbios: Entry =3D f0000:24d4 Rev =3D 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: < INTEL SOLANO70> on motherboard acpi0: [MPSAFE] pci_open(1):=09mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a):=09mode1res=3D0x80000000 (0x80000000) pci_cfgcheck:=09device 0 [class=3D060000] [hdr=3D00] is there (id=3D1130808= 6) pcibios: BIOS version 2.10 Found $PIR table, 12 entries at 0xc00f3790 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15 embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 14 15 embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15 embedded 1 8 A 0x68 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 B 0x61 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 C 0x62 3 4 5 7 9 10 11 12 14 15 slot 1 1 0 D 0x63 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 B 0x62 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 C 0x63 3 4 5 7 9 10 11 12 14 15 slot 2 1 1 D 0x60 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 A 0x62 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 B 0x63 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 C 0x60 3 4 5 7 9 10 11 12 14 15 slot 3 1 2 D 0x61 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 A 0x63 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 B 0x60 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 C 0x61 3 4 5 7 9 10 11 12 14 15 slot 4 1 3 D 0x62 3 4 5 7 9 10 11 12 14 15 slot 5 1 4 A 0x60 3 4 5 7 9 10 11 12 14 15 slot 6 1 5 A 0x61 3 4 5 7 9 10 11 12 14 15 slot 6 1 5 B 0x62 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 3 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 7 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: <ACPI PCI Link LNKF> on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: <ACPI PCI Link LNKG> on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 ACPI timer: 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x410 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=3D0 found->=09vendor=3D0x8086, dev=3D0x1130, revid=3D0x02 =09bus=3D0, slot=3D0, func=3D0 =09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found->=09vendor=3D0x8086, dev=3D0x1132, revid=3D0x02 =09bus=3D0, slot=3D2, func=3D0 =09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Da, irq=3D11 =09powerspec 2 supports D0 D3 current D0 =09map[10]: type 3, range 32, base f8000000, size 26, enabled =09map[14]: type 1, range 32, base ffa80000, size 19, enabled pcib0: matched entry for 0.2.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \_SB_.PCI0.LNKA found->=09vendor=3D0x8086, dev=3D0x244e, revid=3D0x02 =09bus=3D0, slot=3D30, func=3D0 =09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 =09cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found->=09vendor=3D0x8086, dev=3D0x2440, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D0 =09class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 =09cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found->=09vendor=3D0x8086, dev=3D0x244b, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D1 =09class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found->=09vendor=3D0x8086, dev=3D0x2442, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D2 =09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Dd, irq=3D7 =09map[20]: type 4, range 32, base 0000ef40, size 5, enabled pcib0: matched entry for 0.31.INTD (src \_SB_.PCI0.LNKD:0) pcib0: slot 31 INTD routed to irq 7 via \_SB_.PCI0.LNKD found->=09vendor=3D0x8086, dev=3D0x2443, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D3 =09class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Db, irq=3D3 =09map[20]: type 4, range 32, base 0000efa0, size 4, enabled pcib0: matched entry for 0.31.INTB (src \_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 3 via \_SB_.PCI0.LNKB found->=09vendor=3D0x8086, dev=3D0x2444, revid=3D0x02 =09bus=3D0, slot=3D31, func=3D4 =09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) =09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Dc, irq=3D5 =09map[20]: type 4, range 32, base 0000ef80, size 5, enabled pcib0: matched entry for 0.31.INTC (src \_SB_.PCI0.LNKH:0) pcib0: slot 31 INTC routed to irq 5 via \_SB_.PCI0.LNKH agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf8000000-0xfbffffff,0xffa80 000-0xffafffff irq 11 at device 2.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000 agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xffa80000 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 3 pcib1: I/O decode 0xa000-0xdfff pcib1: memory decode 0xff200000-0xff8fffff pcib1: prefetched decode 0xee800000-0xf6afffff pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 0.2.INTA at func 0: 11 pci_link2: BIOS IRQ 11 does not match initial IRQ 10 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=3D1 found->=09vendor=3D0x8086, dev=3D0xb154, revid=3D0x00 =09bus=3D1, slot=3D2, func=3D0 =09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 =09cmdreg=3D0x0107, statreg=3D0x02b0, cachelnsz=3D0 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found->=09vendor=3D0x8086, dev=3D0x1229, revid=3D0x08 =09bus=3D1, slot=3D3, func=3D0 =09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000= ns) =09intpin=3Da, irq=3D7 =09powerspec 2 supports D0 D1 D2 D3 current D0 =09map[10]: type 1, range 32, base ff8fc000, size 12, enabled pcib1: (null) requested memory range 0xff8fc000-0xff8fcfff: good =09map[14]: type 4, range 32, base 0000c800, size 6, enabled pcib1: (null) requested I/O range 0xc800-0xc83f: in range =09map[18]: type 1, range 32, base ff600000, size 20, enabled pcib1: (null) requested memory range 0xff600000-0xff6fffff: good pcib1: matched entry for 1.3.INTA (src \_SB_.PCI0.LNKD:0) pcib1: slot 3 INTA routed to irq 7 via \_SB_.PCI0.LNKD found->=09vendor=3D0x8086, dev=3D0x1229, revid=3D0x08 =09bus=3D1, slot=3D4, func=3D0 =09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000= ns) =09intpin=3Da, irq=3D11 =09powerspec 2 supports D0 D1 D2 D3 current D0 =09map[10]: type 1, range 32, base ff8fd000, size 12, enabled pcib1: (null) requested memory range 0xff8fd000-0xff8fdfff: good =09map[14]: type 4, range 32, base 0000d000, size 6, enabled pcib1: (null) requested I/O range 0xd000-0xd03f: in range =09map[18]: type 1, range 32, base ff700000, size 20, enabled pcib1: (null) requested memory range 0xff700000-0xff7fffff: good pcib1: matched entry for 1.4.INTA (src \_SB_.PCI0.LNKA:0) pcib1: slot 4 INTA routed to irq 11 via \_SB_.PCI0.LNKA found->=09vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01 =09bus=3D1, slot=3D5, func=3D0 =09class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1 =09cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250= ns) =09intpin=3Da, irq=3D3 =09powerspec 2 supports D0 D3 current D0 =09map[10]: type 4, range 32, base 0000d400, size 8, enabled pcib1: (null) requested I/O range 0xd400-0xd4ff: in range =09map[14]: type 1, range 64, base ff8fe000, size 12, enabled pcib1: (null) requested memory range 0xff8fe000-0xff8fefff: good pcib1: matched entry for 1.5.INTA (src \_SB_.PCI0.LNKB:0) pcib1: slot 5 INTA routed to irq 3 via \_SB_.PCI0.LNKB found->=09vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01 =09bus=3D1, slot=3D5, func=3D1 =09class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1 =09cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250= ns) =09intpin=3Db, irq=3D10 =09powerspec 2 supports D0 D3 current D0 =09map[10]: type 4, range 32, base 0000d800, size 8, enabled pcib1: (null) requested I/O range 0xd800-0xd8ff: in range =09map[14]: type 1, range 64, base ff8ff000, size 12, enabled pcib1: (null) requested memory range 0xff8ff000-0xff8fffff: good pcib1: matched entry for 1.5.INTB (src \_SB_.PCI0.LNKC:0) pcib1: slot 5 INTB routed to irq 11 via \_SB_.PCI0.LNKC pcib2: <PCI-PCI bridge> at device 2.0 on pci1 pcib2: secondary bus 2 pcib2: subordinate bus 3 pcib2: I/O decode 0xa000-0xbfff pcib2: memory decode 0xff200000-0xff3fffff pcib2: prefetched decode 0xee800000-0xf69fffff pci2: <PCI bus> on pcib2 pci2: physical bus=3D2 found->=09vendor=3D0x8086, dev=3D0xb154, revid=3D0x00 =09bus=3D2, slot=3D0, func=3D0 =09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 =09cmdreg=3D0x0107, statreg=3D0x0290, cachelnsz=3D0 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found->=09vendor=3D0x1077, dev=3D0x1216, revid=3D0x06 =09bus=3D2, slot=3D1, func=3D0 =09class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 ns= ) =09intpin=3Da, irq=3D7 =09powerspec 1 supports D0 D3 current D0 =09map[10]: type 4, range 32, base 0000b800, size 8, enabled pcib2: (null) requested I/O range 0xb800-0xb8ff: in range pcib1: (null) requested I/O range 0xb800-0xb8ff: in range =09map[14]: type 1, range 32, base ff3ff000, size 12, enabled pcib2: (null) requested memory range 0xff3ff000-0xff3fffff: good pcib1: (null) requested memory range 0xff3ff000-0xff3fffff: good pcib1: matched entry for 1.2.INTB (src \_SB_.PCI0.LNKD:0) pcib1: slot 2 INTB routed to irq 7 via \_SB_.PCI0.LNKD pcib2: slot 1 INTA is routed to irq 7 pcib3: <PCI-PCI bridge> at device 0.0 on pci2 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xa000-0xafff pcib3: memory decode 0xff200000-0xff2fffff pcib3: prefetched decode 0xee800000-0xf68fffff pci3: <PCI bus> on pcib3 pci3: physical bus=3D3 found->=09vendor=3D0x101e, dev=3D0x1960, revid=3D0x20 =09bus=3D3, slot=3D0, func=3D0 =09class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0 =09cmdreg=3D0x0116, statreg=3D0x0290, cachelnsz=3D8 (dwords) =09lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) =09intpin=3Da, irq=3D10 =09powerspec 2 supports D0 D3 current D0 =09map[10]: type 3, range 32, base f0000000, size 26, enabled pcib3: (null) requested memory range 0xf0000000-0xf3ffffff: good pcib2: (null) requested memory range 0xf0000000-0xf3ffffff: good pcib1: (null) requested memory range 0xf0000000-0xf3ffffff: good pcib1: matched entry for 1.2.INTA (src \_SB_.PCI0.LNKC:0) pcib1: slot 2 INTA routed to irq 11 via \_SB_.PCI0.LNKC pcib2: slot 0 INTA is routed to irq 11 pcib3: slot 0 INTA is routed to irq 11 amr0: <LSILogic MegaRAID 1.51> mem 0xf0000000-0xf3ffffff irq 11 at device 0.0 on pci3 amr0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf0000000 amr0: [MPSAFE] amr0: <LSILogic PERC 3/DC> Firmware 198U, BIOS 3.35, 64MB RAM pci2: <mass storage, SCSI> at device 1.0 (no driver attached) pci2:1:0: Transition from D0 to D3 fxp0: <Intel 82559 Pro/100 Ethernet> port 0xc800-0xc83f mem 0xff8fc000-0xff8fcfff ,0xff600000-0xff6fffff irq 7 at device 3.0 on pci1 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff8fc000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 100c 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:30:48:11:2d:f5 fxp0: [MPSAFE] fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xff8fd000-0xff8fdfff ,0xff700000-0xff7fffff irq 11 at device 4.0 on pci1 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff8fd000 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 8086 100c 0008 fxp1: Dynamic Standby mode is disabled miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:30:48:11:2d:f4 fxp1: [MPSAFE] ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd400-0xd4ff mem 0xff8fe000-0 xff8fefff irq 3 at device 5.0 on pci1 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd400 ahc0: Reading SEEPROM...done. ahc0: Manual SE Termination ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 423 instructions downloaded ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x20485560 ahc0: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xff8ff000-0 xff8fffff irq 11 at device 5.1 on pci1 ahc1: Defaulting to MEMIO off ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 ahc1: Reading SEEPROM...done. ahc1: Manual SE Termination ahc1: Manual LVD Termination ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 423 instructions downloaded ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x28485560 ahc1: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 ,0xffa0-0xffaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0: stat0=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D10 stat1=3D00 devices=3D0x4<ATAPI_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 ata1: stat0=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 ata1: stat1=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 ata1: reset tp2 stat0=3D01 stat1=3D01 devices=3D0x0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 7 a t device 31.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef40 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 5 a t device 31.4 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef80 uhci1: [GIANT-LOCKED] usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered acpi_button0: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x401 0x411 0x401 0x401 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A, console ahc_isa_probe 0: ioport 0xc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x401 0x401 0x401 0x401 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 735005322 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire acd0: setting PIO4 on Intel ICH2 chip acd0: setting UDMA33 on Intel ICH2 chip acd0: <HL-DT-ST GCE-8520B/1.03> CDRW drive at ata0 as master acd0: read 6890KB/s (6890KB/s) write 688KB/s (8957KB/s), 2048KB buffer, UDM= A33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 104040MB (213073920 sectors) RAID 5 (optimal) GEOM: new disk amrd0 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout < There's a 10 second pause at least here > ahc0: Selection Timeout on A:0. 0 SCBs aborted ahc1: Selection Timeout on A:0. 0 SCBs aborted fdc0: input ready timeout ahc0: Selection Timeout on A:9. 0 SCBs aborted ahc1: Selection Timeout on A:1. 0 SCBs aborted ahc0: Selection Timeout on A:10. 0 SCBs aborted ahc1: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:11. 0 SCBs aborted ahc1: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:12. 0 SCBs aborted ahc1: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:1. 0 SCBs aborted ahc1: Selection Timeout on A:5. 0 SCBs aborted ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc1: Selection Timeout on A:6. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc1: Selection Timeout on A:9. 0 SCBs aborted (ahc0:A:4:0): Received WDTR 1 filtered to 0 (ahc0:A:4:0): Target Initiated WDTR (ahc0:A:4:0): Sending WDTR 0 ahc0: target 4 using 8bit transfers (ahc0:A:4:0): Received SDTR period a, offset 1f =09Filtered to period 0, offset 0 ahc0: target 4 using asynchronous transfers (ahc0:A:4:0): Target Initiated SDTR (ahc0:A:4:0): Sending SDTR period 45, offset 0 ahc1: Selection Timeout on A:10. 0 SCBs aborted ahc1: Selection Timeout on A:11. 0 SCBs aborted ahc0: Selection Timeout on A:5. 0 SCBs aborted ahc1: Selection Timeout on A:12. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted ahc1: Selection Timeout on A:13. 0 SCBs aborted ahc0: Selection Timeout on A:8. 0 SCBs aborted ahc1: Selection Timeout on A:8. 0 SCBs aborted ahc0: Selection Timeout on A:13. 0 SCBs aborted ahc1: Selection Timeout on A:14. 0 SCBs aborted ahc0: Selection Timeout on A:14. 0 SCBs aborted ahc1: Selection Timeout on A:15. 0 SCBs aborted ahc0: Selection Timeout on A:15. 0 SCBs aborted (probe34:ahc0:0:4:0): Retrying Command (ahc0:A:4:0): Sending WDTR 1 (ahc0:A:4:0): Received WDTR 1 filtered to 1 ahc0: target 4 using 16bit transfers (ahc0:A:4:0): Sending SDTR period a, offset 7f (ahc0:A:4:0): Received SDTR period a, offset 1f =09Filtered to period a, offset 1f ahc0: target 4 synchronous at 40.0MHz, offset =3D 0x1f
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?70e8236f05080813372e406f44>