Date: Wed, 4 Nov 2009 15:34:49 +0300 From: Mike Barnard <mike.barnardq@gmail.com> To: freebsd-stable@freebsd.org Subject: Broadcom BCM5715 not coming up Message-ID: <7dc029620911040434v7145b8afue945f2e3930dfb75@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I am experiencing a weird problem on an HP ProLiant BL480c G1 with a
Broadcom Dual Gigabit network card.
For some reason, it wont come up. I have tried it with different media
speeds, options but nothing. I upgraded my sources, recompiled and installed
from FreeBSD 7.1-PRERELEASE to 7.2-STABLE but I get the same error.
pciconf -lv shows this:
pcib5@pci0:9:0:0: class=0x060400 card=0x00000000 chip=0x01031166
rev=0xb5 hdr=0x01
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'Broadcom dual gigabit, pci bridge (BCM5715)'
class = bridge
subclass = PCI-PCI
bge0@pci0:10:4:0: class=0x020000 card=0x703c103c chip=0x167914e4
rev=0xa3 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme 5715S Gigabit Ethernet'
class = network
subclass = ethernet
bge1@pci0:10:4:1: class=0x020000 card=0x703c103c chip=0x167914e4
rev=0xa3 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme 5715S Gigabit Ethernet'
class = network
subclass = ethernet
dmesg, clipped, shows this:
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib5
bge0: <HP NC326i Dual Port PCI-E Gigabit Adapter, ASIC rev. 0x9003> mem
0xfdef0000-0xfdefffff,0xfdee0000-0xfdeeffff irq 17 at device 4.0 on pci10
bge0: Ethernet address: 00:1a:4b:cf:3e:3f
bge0: [ITHREAD]
bge1: <HP NC326i Dual Port PCI-E Gigabit Adapter, ASIC rev. 0x9003> mem
0xfded0000-0xfdedffff,0xfdec0000-0xfdecffff irq 18 at device 4.1 on pci10
bge1: Ethernet address: 00:1a:4b:cf:3e:40
bge1: [ITHREAD]
...
...
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0: 1000baseSX-FDX, auto
bce0: Ethernet address: 00:1b:78:02:7c:56
bce0: [ITHREAD]
bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
(0x01090605); Flags( MSI )
pcib14: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib15
bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem
0xfa000000-0xfbffffff irq 17 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus1
brgphy1: 1000baseSX-FDX, auto
bce1: Ethernet address: 00:1b:78:02:7c:4e
bce1: [ITHREAD]
bce1: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
(0x01090605); Flags( MSI )
The bge interface is seen as NetXtreme 5715S Gigabit Ethernet, while the bce
interface is seen as NetXtreme II BCM5708S Gigabit Ethernet
Anyone seen this before... Im lost on this one :-/ any direction is welcome.
--
Mike
Of course, you might discount this possibility, but remember that one in
a million chances happen 99% of the time.
------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7dc029620911040434v7145b8afue945f2e3930dfb75>