Date: Fri, 29 Dec 2006 00:12:26 +0800 From: "Janvier Pang" <janvier.roc@gmail.com> To: "Abdullah Al-Marrie" <almarrie@gmail.com>, "Janvier Pang" <janvier.roc@gmail.com>, freebsd-x11@freebsd.org Subject: Re: Can anybody change the resolution to 1280x800? Message-ID: <7deba7c00612280812s51089c57ie57c11e32d21c0bb@mail.gmail.com> In-Reply-To: <20061228145033.GA35875@owl.midgard.homeip.net> References: <7deba7c00612260923ja2c6eccs52e7004d7fdec33@mail.gmail.com> <499c70c0612261017yf098367u598d4ac8d191f1b1@mail.gmail.com> <20061228145033.GA35875@owl.midgard.homeip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, But I'm truely believe that the vesa can use the resolution. That's because I can found such information in my log file if I use the vesa driver: ... (II) VESA(0): Gamma: 2.20 (II) VESA(0): No DPMS capabilities specified; RGB/Color Display (II) VESA(0): First detailed timing is preferred mode (II) VESA(0): redX: 0.575 redY: 0.359 greenX: 0.319 greenY: 0.532 (II) VESA(0): blueX: 0.155 blueY: 0.129 whiteX: 0.312 whiteY: 0.328 (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 68.9 MHz Image Size: 331 x 207 mm (II) VESA(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0 (II) VESA(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0 (II) VESA(0): QUANTADISPLAY (II) VESA(0): QD15TL072 (II) VESA(0): Searching for matching VESA mode(s): (==) VESA(0): Write-combining range (0x0,0x1000) was already clear ... It said that the vesa found the correct additional video mode with 1280x800 resolution on my card. The problem is: how can I apply this mode? Thanks for your kindly reply. B.Rgds. Janvier Pag On 12/28/06, Erik Trulsson <ertr1013@student.uu.se> wrote: > > On Tue, Dec 26, 2006 at 09:17:59PM +0300, Abdullah Al-Marrie wrote: > > On 12/26/06, Janvier Pang <janvier.roc@gmail.com> wrote: > > >Dear All, > > > > > >I have a laptop, there're ATI Mobility Radeon X1300 display card and > wide > > >screen with 1280x800 resolutions on it. > > > > > >I'd like to use the native ati driver, Unfortunately I can't find any > > >available driver about this card on the internet. So that I must > choose > > >another way to use this card. > > > > > >I configured the vesa driver in /etc/X11/xorg.conf, and then start the > X. I > > >got the following message in /var/log/Xorg.0.log: > > > > > > > > > >... > > >(II) VESA(0): Total Memory: 256 64KB banks (16384kB) > > >(WW) VESA(0): config file hsync range 31.5-64.3kHz not within DDC hsync > > >ranges. > > >(WW) VESA(0): config file vrefresh range 50-70Hz not within DDC > vrefresh > > >ranges. > > >(II) VESA(0): My Monitor: Using hsync range of 31.50-64.30 kHz > > >(II) VESA(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz > > >(II) VESA(0): Not using mode "1280x800" (no mode of this name) > > >(--) VESA(0): Virtual size is 1024x768 (pitch 1024) > > >(**) VESA(0): Built-in mode "1024x768" > > >(**) VESA(0): Built-in mode "1024x768" > > >(**) VESA(0): Built-in mode "800x600" > > >... > > > > > >It said "1280x800" mode cound not to be found, but I have added this > mode > > >into /etc/X11/xorg.conf. Why it can not to be detected? > > > > > >If I can use the additional video mode, I can use my wide screen under > > >1280x800 resolution I think. Could anybody give me some hints about how > to > > >apply the additional video mode? > > > > > >Thanks. > > > > > >Janvier Pang. > > > > Here is my xorg.conf file and I use ATI Radeon 1100 > > > > I'm loading the dri module which is Xorg module to support radeon > > No, it is not. dri/drm are for using accelerated 3D (on those cards where > this is supported) and has nothing to do with which resolutions you can > use. > > > X.org 6.9 does not have any support for the X1300. There might be some > support > for it in the upcoming X.org 7.x (for x > 0), but I am not sure about > that. > > > If you are using the 'vesa' driver I believe that you can only use those > modes that have been pre-programmed in the card's BIOS. 1280x800 (or > other > wide-screen resolutions) is usually not one of those. > > > > -- > <Insert your favourite quote here.> > Erik Trulsson > ertr1013@student.uu.se >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7deba7c00612280812s51089c57ie57c11e32d21c0bb>