Date: Thu, 13 May 2021 17:56:38 +0200 From: Henri Hennebert <hlh@restart.be> To: lev@FreeBSD.org, Marc Veldman <marc@bumblingdork.com> Cc: freebsd-current@freebsd.org Subject: Re: CURRENT crashes at early boot on Lenovo T540p: rtsx to blame - 13.0-RELEASE crashes same way! Message-ID: <7eb763ce-0bbf-9baf-2ede-968ee25cff2e@restart.be> In-Reply-To: <417a97b9-2c40-310c-c445-b193c493b880@FreeBSD.org> References: <a7363387-c53f-d6c0-acc0-be9081590ea1@FreeBSD.org> <b72d8b9d-8cfd-84a7-59b2-c5a2b33416e7@FreeBSD.org> <20210512141130.755ae361@ernst.home> <D9843F30-308D-4F9F-A229-05639346564A@bumblingdork.com> <9f0abf48-ed13-bff3-5687-fca0d57195d8@restart.be> <C4E25C70-25BA-4BEB-83F0-D77279B2B94A@bumblingdork.com> <8d4e076b-9ecd-aef2-0ee8-73519bb9d939@FreeBSD.org> <8d2be5f2-4144-082e-4237-0dac0c4b37e6@restart.be> <f084b1c8-5020-2db9-6cf3-47641066bb69@FreeBSD.org> <6798878a-c499-d78d-e96d-d744513cb80d@restart.be> <a630c8a3-a9d7-c6f5-111c-be0e64db1ec6@FreeBSD.org> <1de588e2-20cb-3206-3aea-f3f88f577675@restart.be> <c324501a-6a8e-f8aa-3ecd-e8d7d3485e2c@FreeBSD.org> <e20d2d7d-8584-bb6b-465d-83a5b63f8210@restart.be> <67f0874a-6a05-67f1-3f2b-c4b3dc67fa11@FreeBSD.org> <83b823bf-c6c2-2f6a-b5dd-2e91b4d1931e@restart.be> <2c208bbc-5adc-2327-4717-a5e7c8d64b4b@FreeBSD.org> <9a15daa7-2b17-e257-d4d1-850c632a9db8@restart.be> <417a97b9-2c40-310c-c445-b193c493b880@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 5/13/21 5:51 PM, Lev Serebryakov wrote: > On 13.05.2021 18:38, Henri Hennebert via freebsd-current wrote: > >> This seems a good news. >> >> Can you replace sys/dev/rtsx.c by the latest version (2.0g) from >> https://github.com/hlh-restart/rtsx >> >> I reduce the DELAY to 250000 and make some other updates waiting in the pipeline. > I've replaced two files in /usr/src/sys/dev/rtsx, rebuilt GENERIC kernel and it > boots! > > Output WITHOUT card is like this: > > pci2: <ACPI PCI bus> on pcib2 > rtsx0: <2.0g Realtek RTS5227 PCI MMC/SD Card Reader> mem 0xf4500000-0xf4500fff > at device 0.0 on pci2 > rtsx0: We are running with inversion: 0 > rtsx0: Interrupt card inserted/removed > rtsx0: Card absent > rtsx0: No card is detected > pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 > > > Output WITH card is like this: > > pci2: <ACPI PCI bus> on pcib2 > rtsx0: <2.0g Realtek RTS5227 PCI MMC/SD Card Reader> mem 0xf4500000-0xf4500fff > at device 0.0 on pci2 > rtsx0: We are running with inversion: 0 > rtsx0: Interrupt card inserted/removed > rtsx0: Card present > rtsx0: A card is detected > mmc0: <MMC/SD bus> on rtsx0 > pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 > ... > mmcsd0: 16GB <SDHC SDC 1.0 SN 0000056F MFG 01/2012 by 116 JE> at mmc0 > 50.0MHz/4bit/2048-block > ... > > No visible delays in both cases. > > Both boots are "cold", with AC cycle > So if I understand correctly, your problem is solved. I will push this new version to current, but it will take some time because I am not a committer. Henri
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7eb763ce-0bbf-9baf-2ede-968ee25cff2e>