Date: Sat, 15 Oct 2016 23:10:22 -0400 From: Anthony Jenkins <Scoobi_doo@yahoo.com> To: George Mitchell <george+freebsd@m5p.com>, freebsd-usb@freebsd.org Subject: Re: Clandestine USB SD card slot Message-ID: <832db721-d03a-a21e-11ed-701190140d17@yahoo.com> In-Reply-To: <b11d8197-eb1b-b98a-3686-b738c41dca9f@m5p.com> References: <b11d8197-eb1b-b98a-3686-b738c41dca9f@m5p.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/15/16 18:28, George Mitchell wrote: > FreeBSD 10.3-RELEASE-p7 #0: Thu Aug 11 18:38:15 UTC 2016 > Acer Aspire E15 > There is a slot on the front of this laptop which sure looks like an > SD card slot, which I hope corresponds to one of these: > > ugen1.1: <EHCI root HUB AMD> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE (0mA) > ugen0.1: <XHCI root HUB 0x1022> at usbus0, cfg=0 md=HOST spd=SUPER > (5.0Gbps) pwr=SAVE (0mA) > ugen2.1: <EHCI root HUB AMD> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE (0mA) > ugen1.2: <product 0x7900 vendor 0x0438> at usbus1, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE (100mA) > ugen2.2: <product 0x7900 vendor 0x0438> at usbus2, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=SAVE (100mA) > ugen0.2: <product 0x10b8 vendor 0x1058> at usbus0, cfg=0 md=HOST > spd=SUPER (5.0Gbps) pwr=ON (224mA) > ugen1.3: <Generic USB Hub ALCOR> at usbus1, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=SAVE (100mA) > ugen2.3: <product 0x2970 vendor 0x06cb> at usbus2, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=ON (100mA) > ugen1.4: <USB OPTICAL MOUSE vendor 0x0101> at usbus1, cfg=0 md=HOST > spd=LOW (1.5Mbps) pwr=ON (100mA) > ugen1.5: <USB 2.0 Hub vendor 0x1a40> at usbus1, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=SAVE (100mA) > ugen1.6: <E-MU XMidi1X1 Tab E-MU Systems,Inc.> at usbus1, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=ON (100mA) > ugen1.7: <product 0x300b vendor 0x04ca> at usbus1, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=ON (100mA) > ugen1.8: <HD WebCam NC.21411.02W44504122LM0007> at usbus1, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON (500mA) > > But inserting a card into the slot produces no results, even with > sysctl hw.usb.umass.debug=1 hw.usb.ugen.debug=1 hw.usb.dev.debug=1. > (sysctl hw.usb.debug=1 produces way too much output all the time.) > Any suggestions on how I can get this slot to overcome its shyness? > (I am not subscribed to the list; please CC me.) -- George Your card reader is probably on the PCI bus (and likely not supported by FreeBSD); I couldn't find any of your USB Pid:Vids as card readers. [ajenkins@ajenkins-hplaptop ~]$ pciconf -lv ... none2@pci0:3:0:0: class=0xff0000 card=0x1995103c chip=0x522910ec rev=0x01 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTS5229 PCI Express Card Reader' Anthony Jenkins
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?832db721-d03a-a21e-11ed-701190140d17>