Date: 17 Dec 2002 11:51:37 +0100 From: Dmitry Karasik <dmitry@karasik.eu.org> To: freebsd-stable@freebsd.org Subject: Re: pcm0 problems on 4.7 Message-ID: <84pts0or46.fsf@plab.ku.dk> In-Reply-To: Ulrich Spoerlein's message of "Mon, 16 Dec 2002 21:08:25 %2B0100" References: <84isxtda8q.fsf@plab.ku.dk> <20021216210825.0d6ea0d3.q@uni.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Ulrich!
On 16 Dec 02 at 21:08, "Ulrich" (Ulrich Spoerlein) wrote:
Ulrich> give us the output of:
Ulrich> dmesg pciconf -vl cat /dev/sndstat
The mb has a builtin card also, which also doesn't work,
( it's ok since I don't use it anyway ), but the symptoms
are same. I tried it both enabled and disabled in bios,
all the same.
-- dmesg ---------------------------------------------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #15: Mon Dec 16 21:01:30 CET 2002
root@raven.plab.ku.dk:/usr/obj/usr/src/sys/RAVEN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2399933608 Hz
CPU: Pentium 4 (2399.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC,<b31>>
real memory = 536084480 (523520K bytes)
avail memory = 518221824 (506076K bytes)
Preloaded elf kernel "kernel" at 0xc03a6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03a609c.
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc00c5477 (c0005477)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
Using $PIR table, 11 entries at 0xc00f4720
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2561)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
pci0: <UHCI USB controller> at 29.0 irq 11
pci0: <UHCI USB controller> at 29.1 irq 5
pci0: <UHCI USB controller> at 29.2 irq 10
pci0: <USB controller> at 29.7 irq 9
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcm0: <Creative CT5880-C> port 0xdc00-0xdc3f irq 11 at device 1.0 on pci2
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd480-0xd4ff mem 0xfeafec00-0xfeafec7f irq 5 at device 3.0 on pci2
xl0: Ethernet address: 00:10:4b:ba:48:55
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2930CU SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 10 at device 5.0 on pci2
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 3
pcm1: <Intel 82801DB (ICH4)> port 0xe080-0xe0bf,0xe400-0xe4ff mem 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 3 at device 31.5 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> flags 0x4 irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
ad0: 78167MB <Maxtor 4D080H4> [158816/16/63] at ata0-master UDMA100
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata1-master PIO4
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s2a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <SONY CD-RW CRX140S 1.0e> Removable CD-ROM SCSI-4 device
cd0: 5.000MB/s transfers (5.000MHz, offset 15)
cd0: cd present [1 x 2048 byte records]
cd9660: RockRidge Extension
-- pciconf -vl ---------------------------------------------
chip0@pci0:0:0: class=0x060000 card=0x25608086 chip=0x25608086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE DRAM Controller / Host-Hub I/F Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x25618086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE Brookdale Host-to-AGP Bridge'
class = bridge
subclass = PCI-PCI
none0@pci0:29:0: class=0x0c0300 card=0x53568086 chip=0x24c28086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) USB UHCI Controller #1'
class = serial bus
subclass = USB
none1@pci0:29:1: class=0x0c0300 card=0x53568086 chip=0x24c48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) USB UHCI Controller #2'
class = serial bus
subclass = USB
none2@pci0:29:2: class=0x0c0300 card=0x53568086 chip=0x24c78086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) USB UHCI Controller #3'
class = serial bus
subclass = USB
none3@pci0:29:7: class=0x0c0320 card=0x53568086 chip=0x24cd8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) USB EHCI Controller'
class = serial bus
subclass = USB
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB (ICH2/3/4) Hub Interface to PCI Bridge (244E)'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0x53568086 chip=0x24cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
none4@pci0:31:3: class=0x0c0500 card=0x53568086 chip=0x24c38086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) SMBus Controller'
class = serial bus
subclass = SMBus
pcm1@pci0:31:5: class=0x040100 card=0x01068086 chip=0x24c58086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB (ICH4) AC'97 Audio Controller'
class = multimedia
subclass = audio
none5@pci1:0:0: class=0x030000 card=0x2179102b chip=0x0525102b rev=0x04 hdr=0x00
vendor = 'Matrox Graphics Inc'
device = 'MGA-G400/450 Chipset'
class = display
subclass = VGA
pcm0@pci2:1:0: class=0x040100 card=0x20001274 chip=0x58801274 rev=0x02 hdr=0x00
vendor = 'Creative (Was: Ensoniq)'
device = '5880 AudioPCI'
class = multimedia
subclass = audio
xl0@pci2:3:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x24 hdr=0x00
vendor = '3COM Corp, Networking Division'
device = '3C905B-TX Fast Etherlink 10/100 PCI TX NIC'
class = network
subclass = ethernet
ahc0@pci2:5:0: class=0x010000 card=0x38699004 chip=0x38609004 rev=0x03 hdr=0x00
vendor = 'Adaptec Inc'
device = 'AHA-2930CU PCI SCSI Controller'
class = mass storage
subclass = SCSI
------------- cat /dev/sndstat -----------------------------------
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Creative CT5880-C> at io 0xdc00 irq 11 (1p/1r/0v channels duplex)
pcm1: <Intel 82801DB (ICH4)> at io 0xe400, 0xe080 irq 3 bufsz 16384 (1p/1r/0v channels duplex)
--
Sincerely,
Dmitry
--- www.karasik.eu.org ---
Life ain't fair, but the root password helps.
- BOFH
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?84pts0or46.fsf>