Date: 21 Jun 2001 18:49:01 +0200 From: Eric Masson <e-masson@kisoft-services.com> To: Mailing List FreeBSD Mobile <freebsd-mobile@FreeBSD.org> Subject: Intel 2011 & wi driver failure Message-ID: <86zob1srr6.fsf@notbsdems.nantes.kisoft-services.com>
next in thread | raw e-mail | index | archive | help
--=-=-=
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Hello,
FreeBSD notbsdems.nantes.kisoft-services.com 4.3-STABLE
FreeBSD 4.3-STABLE #0: Sun Jun 17 19:07:39 CEST 2001
I'm getting the following log when inserting an Intel 2011 wireless
pccard in my thinkpad :
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x287 iomem 0xd4000-0xd43ff irq 3 slot 0 on pccard0
wi0: mac read failed 5
device_probe_and_attach: wi0 attach returned 5
When i try to eject the card, the machine locks solid.
Any idea ?
Eric Masson
--
des machines UNIX j'en ai deja 2...non, ile veulent aussi que je passe
ma amchien MacOS sous Linux. c'et preuve du succes de Linux, si il
arrive à attirer les imbeciles, c'est qu'il est enfin pret à percer pour
le grand public. +- ED in Guide du Macounet Pervers : Are You Ready ? -+
--=-=-=
Content-Disposition: attachment; filename=dmesg
Content-Description: dmesg output after boot -v
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Sun Jun 17 19:07:39 CEST 2001
root@notbsdems.nantes.kisoft-services.com:/usr/obj/usr/src/sys/THINKPAD
Calibrating clock(s) ... TSC clock: 266604297 Hz, i8254 clock: 1193136 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67043328 (65472K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00399000 - 0x03fe7fff, 63238144 bytes (15439 pages)
avail memory = 61612032 (60168K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f71a0
bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x225
pnpbios: Found PnP BIOS data at 0xc00f71d0
pnpbios: Entry = f0000:9786 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ACPI: 000f7160
Preloaded elf kernel "kernel" at 0xc0373000.
Preloaded elf module "if_wi.ko" at 0xc03730a8.
VESA: information block
56 45 53 41 00 02 20 01 00 01 00 00 00 00 22 00
00 01 27 00 11 01 00 01 00 01 09 01 00 01 1b 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 07 01
0d 01 0e 01 10 01 11 01 12 01 13 01 14 01 15 01
VESA: 24 mode(s) found
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc0305422 (1000022)
VESA: MagicGraph 256 AV 48K
VESA: NeoMagic MagicMedia 256 AV 01.0
Pentium Pro MTRR support enabled
pci_open(1): mode 1 addr port (0x0cf8) is 0x80002814
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
found-> vendor=0x8086, dev=0x7192, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 26
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000fcd0, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 0000fce0, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00001040, size 4
found-> vendor=0x104c, dev=0xac16, revid=0x02
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 04000000, size 12
found-> vendor=0x104c, dev=0xac16, revid=0x02
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 04100000, size 12
found-> vendor=0x10c8, dev=0x0005, revid=0x12
class=03-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base fe800000, size 22
map[18]: type 1, range 32, base fed00000, size 20
found-> vendor=0x10c8, dev=0x8005, revid=0x12
class=04-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[10]: type 1, range 32, base fe400000, size 22
map[14]: type 1, range 32, base fec00000, size 20
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 2.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe a=00 b=00
ata0-master: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8
ata1: mask=01 status0=50 status1=ff
ata1: mask=01 ostat0=50 ostat2=ff
ata1-master: ATAPI probe a=14 b=eb
ata1: mask=01 status0=10 status1=ff
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 11 at device 2.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x1040-0x104f irq 9 at device 2.3 on pci0
intpm0: I/O mapped 1040
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 1000
pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x4000000-0x4000fff irq 11 at device 3.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: ac16104c 02100043 06070002 00820000
10: 04000000 020000a0 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: 00921014 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 28449060 00000600 01888989 00002000
90: 606402c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 0000000f: 00000000: 30000510: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x4100000-0x4100fff irq 11 at device 3.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
PCI Config space:
00: ac16104c 02100043 06070002 00820000
10: 04100000 020000a0 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: 00921014 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 28449060 00000600 01888989 00002000
90: 606402c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 0000000f: 00000000: 30000410: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pci0: <NeoMagic MagicMedia 256AV SVGA controller> (vendor=0x10c8, dev=0x0005) at 5.0 irq 11
chip1: <NeoMagic MagicMedia 256AX Audio controller> mem 0xfec00000-0xfecfffff,0xfe400000-0xfe7fffff irq 11 at device 5.1 on pci0
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00006000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 05 f0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20010 on isa0
sio0: type ST16650A
pcic0: <VLSI 82C146> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
stat is 4c
stat is 4c
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pcic1: Cannot get I/O range
pcic1 failed to probe at port 0x3e0-0x3e1 on isa0
mss_detect - chip revision 0x0a
mss_detect() - Detected CS4231
pcm0: <CS4231> at port 0x530-0x537,0x538-0x539 irq 5 drq 0 flags 0xa111 on isa0
pcm: setmap 4000, 1000; 0xc639d000 -> 4000
pcm: setmap 5000, 1000; 0xc639e000 -> 5000
isa_probe_children: probing PnP devices
BIOS Geometries:
0:020cfe3f 0..524=525 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.16 initialized. Default = block all, Logging = enabled
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DKLA-24320/KL4OA42A> ATA-4 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master UDMA33
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1702B/1462> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
Slot 1 chg = 0x4
ad0s1: type 0xa5, start 63, end = 8289539, size 8289477 : OK
ad0s4: type 0xa0, start 8289540, end = 8434124, size 144585 : OK
start_init: trying /sbin/init
Linux-ELF exec handler installed
pcic: I/O win 0 flags 15 240-287
pcic: I/O win 0 flags 5 240-287
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x287 iomem 0xd4000-0xd43ff irq 3 slot 0 on pccard0
wi0: found PrismII chip
pcic: I/O win 0 flags 15 240-287
wi0: mac read failed 5
pcic: I/O win 0 flags 5 240-287
device_probe_and_attach: wi0 attach returned 5
pcic: I/O win 0 flags 15 2a0-2bf
pcic: I/O win 0 flags 5 2a0-2bf
ed0 at port 0x2a0-0x2bf irq 7 slot 1 on pccard1
pcic: I/O win 0 flags 15 2a0-2bf
bpf: ed0 attached
ed0: address 00:80:c8:8d:14:b3, type NE2000 (16 bit)
--=-=-=--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86zob1srr6.fsf>