Date: Wed, 27 Jan 2010 14:26:34 -0300 From: =?ISO-8859-1?Q?Zavam=2C_Vin=EDcius?= <egypcio@gmail.com> To: freebsd-stable@freebsd.org Subject: freebsd 8.0 stable amd64/x86 needs ~9min to bootup Message-ID: <8b5ad0e11001270926o19d1701fid30ba5a49cbb39b5@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] noon, all you guys. well, I'm having some issues during the 8.0-stable bootup process. it takes ~9min to finish the entire boot process to shows me the "login:" screen. since my first installation attempt to get freebsd up and running here with my dv3-2155mx[1] hp pavilion laptop using 8.0-RC1 amd64 iso I could not boot freebsd up smooth and nicely as it always did for me in my last laptop (dv6130us)[2], but I could install it without any problem. you may check http://www.youtube.com/watch?v=gqtz7E7u4fA to see what realy happens. now I'm using a grub 0.97 from my old gentoo linux installation to bootstrap the freebsd loader. I tryed debug and verbose options using grub and freebsd loader.conf but both just result nothing special. I've been updated and downgraded my laptop bios (by Insyde Software / HP) but got no good results either. I tryed versions F1.3A, F1.2, F0.7 and the original F0.6 version that came originally from HP. to try another way to get into 8.0-stable or 9-current I used 7.2, 7.1, 6.4 and 6.2 release x86 and amd64 iso images to install freebsd and an it's older btx loader but, unfortunately, got the same. it always "freezes" ~9min. I can use freebsd after all the bootup process with no problem. It's a 8.0-stable amd64 now. but I realy wanna know how could I solve this issue. read some cases/PRs/issues with other hp laptops but nothing like this one I have. one of the problems I read was about dv6000 series - weird, it was my old laptop serie and everything was just fine installing, booting and running freebsd into. what you guys think about it? can you give me a hand or a glue to pass this through? thanks. [1] http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01777298&cc=us&lc=en&dlc=en [2] http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00782284&cc=us&lc=en&dlc=en -- Zavam, Vinícius [-- Attachment #2 --] uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50c0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x0f10 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 17 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50a0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x0f00 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504c00-0xd8504fff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504c00 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: waiting for BIOS to give up control usbus2: EHCI version 1.0 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xd7500000-0xd84fffff pcib1: prefetched decode 0xd0400000-0xd13fffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xd6500000-0xd74fffff pcib2: prefetched decode 0xd1400000-0xd23fffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x168c, dev=0x002b, revid=0x01 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd6500000, size 16, enabled pcib2: requested memory range 0xd6500000-0xd650ffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x2000-0x2fff pcib3: memory decode 0xd5500000-0xd64fffff pcib3: prefetched decode 0xd2400000-0xd33fffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8136, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib3: requested I/O range 0x2000-0x20ff: in range map[18]: type Prefetchable Memory, range 64, base 0xd2410000, size 12, enabled pcib3: requested memory range 0xd2410000-0xd2410fff: good map[20]: type Prefetchable Memory, range 64, base 0xd2400000, size 16, enabled pcib3: requested memory range 0xd2400000-0xd240ffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd2410000-0xd2410fff,0xd2400000-0xd240ffff irq 19 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd2410000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x24800000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:23:5a:a2:bd:54 re0: [MPSAFE] re0: [FILTER] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 6 pcib4: I/O decode 0x1000-0x1fff pcib4: memory decode 0xd4500000-0xd54fffff pcib4: prefetched decode 0xd3400000-0xd43fffff pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 20 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5080 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x0f00 usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 22 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5060 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 54 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x0f10 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5040 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x0f00 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504800-0xd8504bff irq 20 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504800 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus6: waiting for BIOS to give up control usbus6: EHCI version 1.0 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 7 pcib5: subordinate bus 7 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci7: <ACPI PCI bus> on pcib5 pci7: domain=0, physical bus=7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel (ID=29298086) AHCI controller> port 0x50e8-0x50ef,0x50fc-0x50ff,0x50e0-0x50e7,0x50f8-0x50fb,0x5020-0x503f mem 0xd8504000-0xd85047ff irq 21 at device 31.2 on pci0 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5020 atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xd8504000 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 55 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC EM eSATA 4ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=3ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 4> on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=0ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 5> on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6ec98 00223 (v1 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 0xb9e6c618 005B3 (v1 PmRef Cpu0Cst 00003001 INTL 20051117) est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) = (2073, 18979) est0: Invalid freq 1600, ignored. est0: Invalid id16 (set, cur) = (1553, 18979) est0: Invalid freq 1200, ignored. p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6de18 001CF (v1 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 0xb9e6ef18 0008D (v1 PmRef ApCst 00003000 INTL 20051117) est1: <Enhanced SpeedStep Frequency Control> on cpu1 est1: Invalid id16 (set, cur) = (2073, 18979) est1: Invalid freq 1600, ignored. est1: Invalid id16 (set, cur) = (1553, 18979) est1: Invalid freq 1200, ignored. p4tcc1: <CPU Frequency Thermal Control> on cpu1 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 251354 -> 100000 procfs registered lapic: Divisor 2, Frequency 99950217 hz Timecounter "TSC" frequency 2098954515 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata2: Identifying devices: 00000001 ata2: New devices: 00000001 md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80e17dc0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 battery0: battery initialization start acpi_acad0: acline initialization start acpi_tz0: _AC0: temperature 63.0 >= setpoint 63.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad4: 476940MB <Seagate ST9500325AS 0003HPM1> at ata2-master SATA300 ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 acpi_tz0: switched from NONE to _AC0: 63.0C ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ata3: device_reset timeout=2590us acd0: <HL-DT-ST DVDRAM GT20L/DC03> DVDR drive at ata3 as master acd0: read 10820KB/s (10820KB/s) write 2705KB/s (2705KB/s), 1024KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: DVD 120mm data disc ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51 msi: Assigning MSI IRQ 256 to local APIC 1 vector 52 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered GEOM: ad4s4: geometry does not match label (255h,63s != 16h,63s). battery0: battery initialization done, tried 1 times uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus6 uhub6: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 ugen6.2: <Generic> at usbus6 umass0: <Bulk-In, Bulk-Out, Interface> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x0000 ugen4.2: <Logitech> at usbus4 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 Root mount waiting for: usbus6 umass0:0:0:-1: Attached to scbus0 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? Root mount waiting for: usbus6 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present Unretryable error (probe0:umass-sim0:0:0:0): error 6 (probe0:umass-sim0:0:0:0): Unretryable Error pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device pass0: 40.000MB/s transfers GEOM: new disk da0 (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6 ugen6.3: <SuYin> at usbus6 Trying to mount root from ufs:/dev/md0 ct_to_ts([2010-01-24 02:21:59]) = 1264299719.000000000 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall acpi_tz0: switched from _AC0 to NONE: 59.0C ugen6.4: <vendor 0x0781> at usbus6 umass1: <vendor 0x0781 product 0x5530, class 0/0, rev 2.00/2.00, addr 4> on usbus6 umass1: SCSI over Bulk-Only; quirks = 0x0000 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): UNIT ATTENTION asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present Retrying Command (per Sense Data) (probe0:umass-sim1:1:0:0): Retrying Command pass1 at umass-sim1 bus 1 target 0 lun 0 pass1: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device pass1: 40.000MB/s transfers GEOM: new disk da1 da1 at umass-sim1 bus 1 target 0 lun 0 da1: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: 7691MB (15753215 512 byte sectors: 255H 63S/T 980C) GEOM: da1: partition 1 does not start on a track boundary. GEOM: da1: partition 1 does not end on a track boundary. GEOM: da1: partition 1 does not start on a track boundary. GEOM: da1: partition 1 does not end on a track boundary. GEOM: da1: partition 1 does not start on a track boundary. GEOM: da1: partition 1 does not end on a track boundary. Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...1 1 0 0 done All buffers synced. Swap device ad4s4b removed. Uptime: 26m46s acpi_button1: wake_prep disabled wake for \\_SB_.SLPB (S5) pcib5: wake_prep disabled wake for \\_SB_.PCI0.P32_ (S5) uhci2: wake_prep disabled wake for \\_SB_.PCI0.UHC1 (S5) uhci3: wake_prep disabled wake for \\_SB_.PCI0.UHC2 (S5) uhci4: wake_prep disabled wake for \\_SB_.PCI0.UHC3 (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.UHC6 (S5) ehci1: wake_prep disabled wake for \\_SB_.PCI0.EHC1 (S5) uhci0: wake_prep disabled wake for \\_SB_.PCI0.UHC4 (S5) uhci1: wake_prep disabled wake for \\_SB_.PCI0.UHC5 (S5) ehci0: wake_prep disabled wake for \\_SB_.PCI0.EHC2 (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP1.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP2.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP3.PXSX (S5) re0: wake_prep disabled wake for \\_SB_.PCI0.EXP4.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP5.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP6.PXSX (S5) Rebooting... cpu_reset: Stopping other CPUs Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz (2098.95-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 3998814208 (3813 MB) ACPI APIC Table: <HPQOEM SLIC-MPC> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <HPQOEM SLIC-MPC> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x50f0-0x50f7 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0: detected 65532k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xd4400000-0xd44fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x0f10 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 17 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0f00 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504c00-0xd8504fff irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus2: waiting for BIOS to give up control usbus2: EHCI version 1.0 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd2410000-0xd2410fff,0xd2400000-0xd240ffff irq 19 at device 0.0 on pci3 re0: Using 1 MSI messages re0: Chip rev. 0x24800000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: Ethernet address: 00:23:5a:a2:bd:54 re0: [FILTER] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pci4: <ACPI PCI bus> on pcib4 uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 20 at device 29.0 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0f00 usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 22 at device 29.1 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0f10 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 18 at device 29.2 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x0f00 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504800-0xd8504bff irq 20 at device 29.7 on pci0 ehci1: [ITHREAD] usbus6: waiting for BIOS to give up control usbus6: EHCI version 1.0 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel AHCI controller> port 0x50e8-0x50ef,0x50fc-0x50ff,0x50e0-0x50e7,0x50f8-0x50fb,0x5020-0x503f mem 0xd8504000-0xd85047ff irq 21 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 4> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 5> on atapci0 ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ad4: 476940MB <Seagate ST9500325AS 0003HPM1> at ata2-master SATA300 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 acd0: DVDR <HL-DT-ST DVDRAM GT20L/DC03> at ata3-master SATA150 SMP: AP CPU #1 Launched! uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered ugen6.2: <vendor 0x0781> at usbus6 umass0: <vendor 0x0781 product 0x5530, class 0/0, rev 2.00/2.00, addr 2> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 7691MB (15753215 512 byte sectors: 255H 63S/T 980C) ugen6.3: <Generic> at usbus6 umass1: <Bulk-In, Bulk-Out, Interface> on usbus6 umass1: SCSI over Bulk-Only; quirks = 0x0000 ugen4.2: <Logitech> at usbus4 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. Root mount waiting for: usbus6 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present (probe0:umass-sim1:1:0:0): Unretryable error da1 at umass-sim1 bus 1 target 0 lun 0 da1: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus6 ugen6.4: <SuYin> at usbus6 Trying to mount root from ufs:/dev/ad4s4a Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...1 0 0 done All buffers synced. Uptime: 1m20s Rebooting... cpu_reset: Stopping other CPUs Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e19000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2098951260 Hz CPU: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz (2098.95-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) 0x0000000000e48000 - 0x00000000b07eafff, 2946117632 bytes (719267 pages) 0x00000000b9ebf000 - 0x00000000b9f82fff, 802816 bytes (196 pages) 0x00000000b9fbf000 - 0x00000000b9fdefff, 131072 bytes (32 pages) 0x00000000b9ff6000 - 0x00000000b9ffdfff, 32768 bytes (8 pages) 0x00000000b9fff000 - 0x00000000b9ffffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 3998814208 (3813 MB) ACPI APIC Table: <HPQOEM SLIC-MPC> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfe020 00024 (v2 HP ) ACPI: XSDT 0xb9ffe120 00074 (v1 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 0xb9ff3000 000F4 (v4 HP RHETT 00000001 MSFT 01000013) ACPI: DSDT 0xb9fe4000 0A5B8 (v1 HP RHETT 00000001 MSFT 01000013) ACPI: FACS 0xb9f8c000 00040 ACPI: DMAR 0xb9ff5000 000B8 (v1 \^A 00000001 00000000) ACPI: SSDT 0xb9ff4000 00655 (v1 PmRef CpuPm 00003000 INTL 20051117) ACPI: HPET 0xb9ff2000 00038 (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: APIC 0xb9ff1000 0006C (v2 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: MCFG 0xb9ff0000 0003C (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: ASF! 0xb9fef000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SLIC 0xb9fe3000 00176 (v1 HPQOEM SLIC-MPC 00000001 LOHR 000F4240) ACPI: BOOT 0xb9fe2000 00028 (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 0xb9fe1000 00296 (v1 INTEL SataAhci 00001000 INTL 20051117) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: <HPQOEM SLIC-MPC> on motherboard PCIe: Memory Mapped configuration base @ 0xf8000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff800000f000 pa 0x4000 AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0 ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 Validation 0 10 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 Validation 0 255 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a40, revid=0x07 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a42, revid=0x07 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd0000000, size 22, enabled map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled map[20]: type I/O Port, range 32, base 0x50f0, size 3, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a43, revid=0x07 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xd4400000, size 20, enabled found-> vendor=0x8086, dev=0x2937, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x50c0, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2938, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x50a0, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x293c, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8504c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x293e, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd8500000, size 14, enabled pcib0: matched entry for 0.27.INTB pcib0: slot 27 INTB hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2940, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2944, revid=0x03 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2946, revid=0x03 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x294a, revid=0x03 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2934, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x5080, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2935, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x5060, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2936, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x5040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x293a, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8504800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2448, revid=0x93 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2919, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2929, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0x50e8, size 3, enabled map[14]: type I/O Port, range 32, base 0x50fc, size 2, enabled map[18]: type I/O Port, range 32, base 0x50e0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x50f8, size 2, enabled map[20]: type I/O Port, range 32, base 0x5020, size 5, enabled map[24]: type Memory, range 32, base 0xd8504000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2930, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 64, base 0xd8505000, size 8, enabled map[20]: type I/O Port, range 32, base 0x5000, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 vgapci0: <VGA-compatible display> port 0x50f0-0x50f7 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000 vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: detected 65532k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xd4400000-0xd44fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50c0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x0f10 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 17 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50a0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x0f00 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504c00-0xd8504fff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504c00 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: waiting for BIOS to give up control usbus2: EHCI version 1.0 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xd7500000-0xd84fffff pcib1: prefetched decode 0xd0400000-0xd13fffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xd6500000-0xd74fffff pcib2: prefetched decode 0xd1400000-0xd23fffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x168c, dev=0x002b, revid=0x01 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd6500000, size 16, enabled pcib2: requested memory range 0xd6500000-0xd650ffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x2000-0x2fff pcib3: memory decode 0xd5500000-0xd64fffff pcib3: prefetched decode 0xd2400000-0xd33fffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8136, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib3: requested I/O range 0x2000-0x20ff: in range map[18]: type Prefetchable Memory, range 64, base 0xd2410000, size 12, enabled pcib3: requested memory range 0xd2410000-0xd2410fff: good map[20]: type Prefetchable Memory, range 64, base 0xd2400000, size 16, enabled pcib3: requested memory range 0xd2400000-0xd240ffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd2410000-0xd2410fff,0xd2400000-0xd240ffff irq 19 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd2410000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x24800000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:23:5a:a2:bd:54 re0: [MPSAFE] re0: [FILTER] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 6 pcib4: I/O decode 0x1000-0x1fff pcib4: memory decode 0xd4500000-0xd54fffff pcib4: prefetched decode 0xd3400000-0xd43fffff pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 20 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5080 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x0f00 usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 22 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5060 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 54 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x0f10 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5040 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x0f00 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504800-0xd8504bff irq 20 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504800 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus6: waiting for BIOS to give up control usbus6: EHCI version 1.0 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 7 pcib5: subordinate bus 7 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci7: <ACPI PCI bus> on pcib5 pci7: domain=0, physical bus=7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel (ID=29298086) AHCI controller> port 0x50e8-0x50ef,0x50fc-0x50ff,0x50e0-0x50e7,0x50f8-0x50fb,0x5020-0x503f mem 0xd8504000-0xd85047ff irq 21 at device 31.2 on pci0 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5020 atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xd8504000 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 55 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC EM eSATA 4ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=4ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 4> on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=0ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 5> on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6ec98 00223 (v1 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 0xb9e6c618 005B3 (v1 PmRef Cpu0Cst 00003001 INTL 20051117) est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) = (2073, 18979) est0: Invalid freq 1600, ignored. est0: Invalid id16 (set, cur) = (1553, 18979) est0: Invalid freq 1200, ignored. p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6de18 001CF (v1 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 0xb9e6ef18 0008D (v1 PmRef ApCst 00003000 INTL 20051117) est1: <Enhanced SpeedStep Frequency Control> on cpu1 est1: Invalid id16 (set, cur) = (2073, 18979) est1: Invalid freq 1600, ignored. est1: Invalid id16 (set, cur) = (1553, 18979) est1: Invalid freq 1200, ignored. p4tcc1: <CPU Frequency Thermal Control> on cpu1 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 251610 -> 100000 procfs registered lapic: Divisor 2, Frequency 99950069 hz Timecounter "TSC" frequency 2098951260 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 battery0: battery initialization start acpi_acad0: acline initialization start ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wireacpi_tz0: _AC0: temperature 69.0 >= setpoint 69.0 ad4: 476940MB <Seagate ST9500325AS 0003HPM1> at ata2-master SATA300 ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 acpi_tz0: switched from NONE to _AC0: 69.0C acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ata3: device_reset timeout=1310us acd0: <HL-DT-ST DVDRAM GT20L/DC03> DVDR drive at ata3 as master acd0: read 10820KB/s (10820KB/s) write 2705KB/s (2705KB/s), 1024KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: DVD 120mm data disc ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51 msi: Assigning MSI IRQ 256 to local APIC 1 vector 52 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered battery0: battery initialization done, tried 1 times uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered ugen6.2: <vendor 0x0781> at usbus6 umass0: <vendor 0x0781 product 0x5530, class 0/0, rev 2.00/2.00, addr 2> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device pass0: 40.000MB/s transfers da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 7691MB (15753215 512 byte sectors: 255H 63S/T 980C) ugen6.3: <Generic> at usbus6 umass1: <Bulk-In, Bulk-Out, Interface> on usbus6 umass1: SCSI over Bulk-Only; quirks = 0x0000 GEOM: new disk da0 ugen4.2: <Logitech> at usbus4 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. Root mount waiting for: usbus6 umass1:1:1:-1: Attached to scbus1 (probe0:umass-sim1:1:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present Unretryable error (probe0:umass-sim1:1:0:0): error 6 (probe0:umass-sim1:1:0:0): Unretryable Error pass1 at umass-sim1 bus 1 target 0 lun 0 pass1: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device pass1: 40.000MB/s transfers GEOM: new disk da1 (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error da1 at umass-sim1 bus 1 target 0 lun 0 da1: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error Opened disk da1 -> 6 (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error Opened disk da1 -> 6 Root mount waiting for: usbus6 ugen6.4: <SuYin> at usbus6 Trying to mount root from ufs:/dev/ad4s4a ct_to_ts([2010-01-24 03:09:05]) = 1264302545.000000000 start_init: trying /sbin/init acpi_tz0: switched from _AC0 to NONE: 64.0C ts_to_ct(1264302587.028779676) = [2010-01-24 03:09:47] [-- Attachment #3 --] Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #0: Sun Jan 24 14:19:40 BRT 2010 root@:/usr/obj/usr/src/sys/GENERIC amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e30000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2098956321 Hz CPU: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz (2098.96-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000048fff, 294912 bytes (72 pages) 0x0000000000059000 - 0x0000000000099fff, 266240 bytes (65 pages) 0x0000000000e5f000 - 0x00000000b07eafff, 2946023424 bytes (719244 pages) 0x00000000b9ebf000 - 0x00000000b9f82fff, 802816 bytes (196 pages) 0x00000000b9fbf000 - 0x00000000b9fdefff, 131072 bytes (32 pages) 0x00000000b9ff6000 - 0x00000000b9ffdfff, 32768 bytes (8 pages) 0x00000000b9fff000 - 0x00000000b9ffffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 3998658560 (3813 MB) ACPI APIC Table: <HPQOEM SLIC-MPC> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfe020 00024 (v2 HP ) ACPI: XSDT 0xb9ffe120 00074 (v1 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 0xb9ff3000 000F4 (v4 HP RHETT 00000001 MSFT 01000013) ACPI: DSDT 0xb9fe4000 0A5B8 (v1 HP RHETT 00000001 MSFT 01000013) ACPI: FACS 0xb9f8c000 00040 ACPI: DMAR 0xb9ff5000 000A0 (v1 \^A 00000001 00000000) ACPI: SSDT 0xb9ff4000 00655 (v1 PmRef CpuPm 00003000 INTL 20051117) ACPI: HPET 0xb9ff2000 00038 (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: APIC 0xb9ff1000 0006C (v2 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: MCFG 0xb9ff0000 0003C (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: ASF! 0xb9fef000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SLIC 0xb9fe3000 00176 (v1 HPQOEM SLIC-MPC 00000001 LOHR 000F4240) ACPI: BOOT 0xb9fe2000 00028 (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 0xb9fe1000 00296 (v1 INTEL SataAhci 00001000 INTL 20051117) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: <HPQOEM SLIC-MPC> on motherboard PCIe: Memory Mapped configuration base @ 0xf8000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff800000f000 pa 0x4000 AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/2 1/2 1/2 1/2 1/1 1/1 1/1 1/1 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 Validation 0 10 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 Validation 0 255 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a40, revid=0x07 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a42, revid=0x07 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd0000000, size 22, enabled map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled map[20]: type I/O Port, range 32, base 0x50f0, size 3, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a43, revid=0x07 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xd4400000, size 20, enabled found-> vendor=0x8086, dev=0x2937, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x50c0, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50c0 found-> vendor=0x8086, dev=0x2938, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x50a0, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50a0 found-> vendor=0x8086, dev=0x293c, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8504c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504c00 ehci early: SMM active, request owner change found-> vendor=0x8086, dev=0x293e, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd8500000, size 14, enabled pcib0: matched entry for 0.27.INTB pcib0: slot 27 INTB hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2940, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2944, revid=0x03 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2946, revid=0x03 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x294a, revid=0x03 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2934, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x5080, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5080 found-> vendor=0x8086, dev=0x2935, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x5060, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 22 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5060 found-> vendor=0x8086, dev=0x2936, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x5040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5040 found-> vendor=0x8086, dev=0x293a, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8504800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504800 ehci early: SMM active, request owner change found-> vendor=0x8086, dev=0x2448, revid=0x93 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2919, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2929, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0x50e8, size 3, enabled map[14]: type I/O Port, range 32, base 0x50fc, size 2, enabled map[18]: type I/O Port, range 32, base 0x50e0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x50f8, size 2, enabled map[20]: type I/O Port, range 32, base 0x5020, size 5, enabled map[24]: type Memory, range 32, base 0xd8504000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2930, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 64, base 0xd8505000, size 8, enabled map[20]: type I/O Port, range 32, base 0x5000, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 vgapci0: <VGA-compatible display> port 0x50f0-0x50f7 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000 vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: detected 65532k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xd4400000-0xd44fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 16 at device 26.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 17 at device 26.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504c00-0xd8504fff irq 18 at device 26.7 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xd7500000-0xd84fffff pcib1: prefetched decode 0xd0400000-0xd13fffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xd6500000-0xd74fffff pcib2: prefetched decode 0xd1400000-0xd23fffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x168c, dev=0x002b, revid=0x01 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd6500000, size 16, enabled pcib2: requested memory range 0xd6500000-0xd650ffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x2000-0x2fff pcib3: memory decode 0xd5500000-0xd64fffff pcib3: prefetched decode 0xd2400000-0xd33fffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8136, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib3: requested I/O range 0x2000-0x20ff: in range map[18]: type Prefetchable Memory, range 64, base 0xd2410000, size 12, enabled pcib3: requested memory range 0xd2410000-0xd2410fff: good map[20]: type Prefetchable Memory, range 64, base 0xd2400000, size 16, enabled pcib3: requested memory range 0xd2400000-0xd240ffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd2410000-0xd2410fff,0xd2400000-0xd240ffff irq 19 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd2410000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x24800000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:23:5a:a2:bd:54 re0: [MPSAFE] re0: [FILTER] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 6 pcib4: I/O decode 0x1000-0x1fff pcib4: memory decode 0xd4500000-0xd54fffff pcib4: prefetched decode 0xd3400000-0xd43fffff pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 20 at device 29.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 22 at device 29.1 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 54 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 18 at device 29.2 on pci0 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x2f00 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504800-0xd8504bff irq 20 at device 29.7 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus6: EHCI version 1.0 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 7 pcib5: subordinate bus 7 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci7: <ACPI PCI bus> on pcib5 pci7: domain=0, physical bus=7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel (ID=29298086) AHCI controller> port 0x50e8-0x50ef,0x50fc-0x50ff,0x50e0-0x50e7,0x50f8-0x50fb,0x5020-0x503f mem 0xd8504000-0xd85047ff irq 21 at device 31.2 on pci0 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5020 atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xd8504000 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 55 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC EM eSATA 4ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=4ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 4> on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=0ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 5> on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6ec98 00223 (v1 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 0xb9e6c618 005B3 (v1 PmRef Cpu0Cst 00003001 INTL 20051117) est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) = (2073, 18979) est0: Can't check freq 1600, it may be invalid est0: Invalid id16 (set, cur) = (1553, 18979) est0: Can't check freq 1200, it may be invalid p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6de18 001CF (v1 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 0xb9e6ef18 0008D (v1 PmRef ApCst 00003000 INTL 20051117) est1: <Enhanced SpeedStep Frequency Control> on cpu1 est1: Invalid id16 (set, cur) = (2073, 18979) est1: Can't check freq 1600, it may be invalid est1: Invalid id16 (set, cur) = (1553, 18979) est1: Can't check freq 1200, it may be invalid p4tcc1: <CPU Frequency Thermal Control> on cpu1 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 251600 -> 100000 procfs registered lapic: Divisor 2, Frequency 99950315 hz Timecounter "TSC" frequency 2098956321 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire battery0: battery initialization startad4: setting UDMA100 acpi_acad0: acline initialization start ad4: 476940MB <Seagate ST9500325AS 0003HPM1> at ata2-master UDMA100 SATA 3Gb/s ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 acpi_tz0: _AC0: temperature 67.0 >= setpoint 67.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 acpi_tz0: switched from NONE to _AC0: 67.0C acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: setting UDMA100 ata3: device_reset timeout=970us acd0: <HL-DT-ST DVDRAM GT20L/DC03> DVDR drive at ata3 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1024KB buffer, UDMA100 SATA 1.5Gb/s acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51 msi: Assigning MSI IRQ 256 to local APIC 1 vector 52 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered battery0: battery initialization done, tried 1 times Root mount waiting for: usbus6 usbus2 Root mount waiting for: usbus6 usbus2 uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 Root mount waiting for: usbus6 ugen6.2: <Generic> at usbus6 umass0: <Bulk-In, Bulk-Out, Interface> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x0000 ugen4.2: <Logitech> at usbus4 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 Root mount waiting for: usbus6 umass0:0:0:-1: Attached to scbus0 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present Unretryable error (probe0:umass-sim0:0:0:0): error 6 (probe0:umass-sim0:0:0:0): Unretryable Error pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 pass0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device pass0: Serial Number 20071114173400000 pass0: 40.000MB/s transfers GEOM: new disk da0 (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device da0: Serial Number 20071114173400000 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6 ugen6.3: <SuYin> at usbus6 Trying to mount root from ufs:/dev/ad4s4a ct_to_ts([2010-01-25 09:29:00]) = 1264411740.000000000 start_init: trying /sbin/init acpi_tz0: switched from _AC0 to NONE: 62.0C ts_to_ct(1264411769.365856676) = [2010-01-25 09:29:29] [-- Attachment #4 --] ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 4> on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=0ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 5> on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x5000-0x501f mem 0xd8505000-0xd85050ff irq 18 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5000 ichsmb0: [MPSAFE] ichsmb0: [ITHREAD] smbus0: <System Management Bus> on ichsmb0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6ec98 00223 (v1 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 0xb9e6c618 005B3 (v1 PmRef Cpu0Cst 00003001 INTL 20051117) est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) = (2073, 18979) est0: Can't check freq 1600, it may be invalid est0: Invalid id16 (set, cur) = (1553, 18979) est0: Can't check freq 1200, it may be invalid p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6de18 001CF (v1 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 0xb9e6ef18 0008D (v1 PmRef ApCst 00003000 INTL 20051117) est1: <Enhanced SpeedStep Frequency Control> on cpu1 est1: Invalid id16 (set, cur) = (2073, 18979) est1: Can't check freq 1600, it may be invalid est1: Invalid id16 (set, cur) = (1553, 18979) est1: Can't check freq 1200, it may be invalid p4tcc1: <CPU Frequency Thermal Control> on cpu1 isab0: found ICH9 or equivalent chipset: Intel ICH9M watchdog timer isa_probe_children: disabling PnP devices ichwd0: <Intel ICH9M watchdog timer> on isa0 isab0: found ICH9 or equivalent chipset: Intel ICH9M watchdog timer ichwd0: Intel ICH9M watchdog timer (ICH9 or equivalent) ichwd0: timer disabled atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 251939 -> 100000 procfs registered lapic: Divisor 2, Frequency 99750921 hz Timecounter "TSC" frequency 2094769309 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire battery0: battery initialization startad4: setting UDMA100 acpi_acad0: acline initialization start ad4: 476940MB <Seagate ST9500325AS 0003HPM1> at ata2-master UDMA100 SATA 3Gb/s ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue acpi_tz0: _AC0: temperature 66.0 >= setpoint 66.0 GEOM: new disk ad4 acpi_tz0: switched from NONE to _AC0: 66.0C ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 system power profile changed to 'economy' acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: setting UDMA100 ata3: device_reset timeout=980us acd0: <HL-DT-ST DVDRAM GT20L/DC03> DVDR drive at ata3 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1024KB buffer, UDMA100 SATA 1.5Gb/s acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4: Identifying devices: 00000000 ata4: New devices: 00000000 battery0: battery initialization done, tried 1 times uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub2: 4 ports with 4 removable, self powered acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed (probe0:ata1:0:0:0): (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed Unretryable error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51 msi: Assigning MSI IRQ 257 to local APIC 1 vector 52 Root mount waiting for: usbus6 uhub6: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 ugen6.2: <SanDisk> at usbus6 umass0: <SanDisk SanDisk Cruzer, class 0/0, rev 2.00/2.00, addr 2> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus6 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? GEOM: new disk da0 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device da0: Serial Number 3550330A15D1E9F5 da0: 40.000MB/s transfers da0: 7691MB (15753215 512 byte sectors: 255H 63S/T 980C) GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. Root mount waiting for: usbus6 ugen6.3: <Generic> at usbus6 umass1: <Bulk-In, Bulk-Out, Interface> on usbus6 umass1: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus6 ugen4.2: <Logitech> at usbus4 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 umass1:3:1:-1: Attached to scbus3 (probe0:umass-sim1:1:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present Unretryable error (probe0:umass-sim1:1:0:0): error 6 (probe0:umass-sim1:1:0:0): Unretryable Error GEOM: new disk da1 (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error da1 at umass-sim1 bus 1 scbus3 target 0 lun 0 da1: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device da1: Serial Number 20071114173400000 da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error Opened disk da1 -> 6 (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error Opened disk da1 -> 6 Root mount waiting for: usbus6 ugen6.4: <SuYin> at usbus6 Trying to mount root from ufs:/dev/ad4s4a ct_to_ts([2010-01-27 11:27:47]) = 1264591667.000000000 start_init: trying /sbin/init acpi_tz0: switched from _AC0 to NONE: 63.0C ts_to_ct(1264591696.075675676) = [2010-01-27 11:28:16] Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...1 1 0 0 done All buffers synced. Swap device ad4s4b removed. Uptime: 1m28s isab0: found ICH9 or equivalent chipset: Intel ICH9M watchdog timer acpi_button1: wake_prep disabled wake for \\_SB_.SLPB (S5) pcib5: wake_prep disabled wake for \\_SB_.PCI0.P32_ (S5) uhci2: wake_prep disabled wake for \\_SB_.PCI0.UHC1 (S5) uhci3: wake_prep disabled wake for \\_SB_.PCI0.UHC2 (S5) uhci4: wake_prep disabled wake for \\_SB_.PCI0.UHC3 (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.UHC6 (S5) ehci1: wake_prep disabled wake for \\_SB_.PCI0.EHC1 (S5) uhci0: wake_prep disabled wake for \\_SB_.PCI0.UHC4 (S5) uhci1: wake_prep disabled wake for \\_SB_.PCI0.UHC5 (S5) ehci0: wake_prep disabled wake for \\_SB_.PCI0.EHC2 (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP1.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP2.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP3.PXSX (S5) re0: wake_prep disabled wake for \\_SB_.PCI0.EXP4.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP5.PXSX (S5) unknown: wake_prep disabled wake for \\_SB_.PCI0.EXP6.PXSX (S5) Rebooting... cpu_reset: Stopping other CPUs Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #0: Wed Jan 27 09:27:36 BRT 2010 root@dv3.zavam.net.br:/usr/obj/usr/src/sys/DV3 amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff808e4000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2094761655 Hz CPU: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz (2094.76-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000048fff, 294912 bytes (72 pages) 0x0000000000059000 - 0x0000000000099fff, 266240 bytes (65 pages) 0x0000000000913000 - 0x00000000b07eafff, 2951577600 bytes (720600 pages) 0x00000000b9ebf000 - 0x00000000b9f82fff, 802816 bytes (196 pages) 0x00000000b9fbf000 - 0x00000000b9fdefff, 131072 bytes (32 pages) 0x00000000b9ff6000 - 0x00000000b9ffdfff, 32768 bytes (8 pages) 0x00000000b9fff000 - 0x00000000b9ffffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 4004347904 (3818 MB) ACPI APIC Table: <HPQOEM SLIC-MPC> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfe020 00024 (v2 HP ) ACPI: XSDT 0xb9ffe120 00074 (v1 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 0xb9ff3000 000F4 (v4 HP RHETT 00000001 MSFT 01000013) ACPI: DSDT 0xb9fe4000 0A5B8 (v1 HP RHETT 00000001 MSFT 01000013) ACPI: FACS 0xb9f8c000 00040 ACPI: DMAR 0xb9ff5000 00098 (v1 \^A 00000001 00000000) ACPI: SSDT 0xb9ff4000 00655 (v1 PmRef CpuPm 00003000 INTL 20051117) ACPI: HPET 0xb9ff2000 00038 (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: APIC 0xb9ff1000 0006C (v2 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: MCFG 0xb9ff0000 0003C (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: ASF! 0xb9fef000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SLIC 0xb9fe3000 00176 (v1 HPQOEM SLIC-MPC 00000001 LOHR 000F4240) ACPI: BOOT 0xb9fe2000 00028 (v1 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 0xb9fe1000 00296 (v1 INTEL SataAhci 00001000 INTL 20051117) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> cpuctl: access to MSR registers/cpuid info. ichwd module loaded io: <I/O> smbios0: <System Management BIOS> at iomem 0xfe120-0xfe13e on motherboard smbios0: Version: 2.4, BCD Revision: 2.4 acpi0: <HPQOEM SLIC-MPC> on motherboard PCIe: Memory Mapped configuration base @ 0xf8000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff800000f000 pa 0x4000 AcpiOsDerivePciId: \\_SB_.PCI0.HBUS -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 acpi_ec0: EcRead: failed waiting to get data ACPI Exception: AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] 20090521 evregion-531 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.LPC_.EC0_.OSTE] (Node 0xffffff00015a5280), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.PCI0.LPC_.EC0_._REG] (Node 0xffffff00015a52a0), AE_NO_HARDWARE_RESPONSE acpi_ec0: can't install address space handler for \\_SB_.PCI0.LPC_.EC0_ - AE_NO_HARDWARE_RESPONSE device_attach: acpi_ec0 attach returned 6 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 Validation 0 10 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 Validation 0 255 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST battery0: <ACPI Control Method Battery> on acpi0 ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST ACPI Error (uteval-0329): Method execution failed [\\_SB_.BAT0._STA] (Node 0xffffff00015a0320), AE_NOT_EXIST acpi_acad0: <AC Adapter> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a40, revid=0x07 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a42, revid=0x07 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd0000000, size 22, enabled map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled map[20]: type I/O Port, range 32, base 0x50f0, size 3, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2a43, revid=0x07 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 3 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xd4400000, size 20, enabled found-> vendor=0x8086, dev=0x2937, revid=0x03 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x50c0, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50c0 found-> vendor=0x8086, dev=0x2938, revid=0x03 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x50a0, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x50a0 found-> vendor=0x8086, dev=0x293c, revid=0x03 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8504c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504c00 ehci early: SMM active, request owner change found-> vendor=0x8086, dev=0x293e, revid=0x03 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd8500000, size 14, enabled pcib0: matched entry for 0.27.INTB pcib0: slot 27 INTB hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2940, revid=0x03 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2944, revid=0x03 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2946, revid=0x03 domain=0, bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x294a, revid=0x03 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2934, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x5080, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5080 found-> vendor=0x8086, dev=0x2935, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x5060, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 22 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5060 found-> vendor=0x8086, dev=0x2936, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x5040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5040 found-> vendor=0x8086, dev=0x293a, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8504800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8504800 ehci early: SMM active, request owner change found-> vendor=0x8086, dev=0x2448, revid=0x93 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2919, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2929, revid=0x03 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type I/O Port, range 32, base 0x50e8, size 3, enabled map[14]: type I/O Port, range 32, base 0x50fc, size 2, enabled map[18]: type I/O Port, range 32, base 0x50e0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x50f8, size 2, enabled map[20]: type I/O Port, range 32, base 0x5020, size 5, enabled map[24]: type Memory, range 32, base 0xd8504000, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2930, revid=0x03 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 64, base 0xd8505000, size 8, enabled map[20]: type I/O Port, range 32, base 0x5000, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 vgapci0: <VGA-compatible display> port 0x50f0-0x50f7 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000 vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: detected 65532k stolen memory agp0: aperture size is 256M drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0 vgapci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 vgapci0: using IRQ 256 for MSI info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xc0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 vgapci1: <VGA-compatible display> mem 0xd4400000-0xd44fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 16 at device 26.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 17 at device 26.1 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504c00-0xd8504fff irq 18 at device 26.7 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 52 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xd7500000-0xd84fffff pcib1: prefetched decode 0xd0400000-0xd13fffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xd6500000-0xd74fffff pcib2: prefetched decode 0xd1400000-0xd23fffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x168c, dev=0x002b, revid=0x01 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xd6500000, size 16, enabled pcib2: requested memory range 0xd6500000-0xd650ffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 18 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x2000-0x2fff pcib3: memory decode 0xd5500000-0xd64fffff pcib3: prefetched decode 0xd2400000-0xd33fffff pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8136, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib3: requested I/O range 0x2000-0x20ff: in range map[18]: type Prefetchable Memory, range 64, base 0xd2410000, size 12, enabled pcib3: requested memory range 0xd2410000-0xd2410fff: good map[20]: type Prefetchable Memory, range 64, base 0xd2400000, size 16, enabled pcib3: requested memory range 0xd2400000-0xd240ffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd2410000-0xd2410fff,0xd2400000-0xd240ffff irq 19 at device 0.0 on pci3 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd2410000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 53 re0: using IRQ 257 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x24800000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:23:5a:a2:bd:54 re0: [MPSAFE] re0: [FILTER] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 6 pcib4: I/O decode 0x1000-0x1fff pcib4: memory decode 0xd4500000-0xd54fffff pcib4: prefetched decode 0xd3400000-0xd43fffff pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 20 at device 29.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 54 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 22 at device 29.1 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 55 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 18 at device 29.2 on pci0 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x2f00 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd8504800-0xd8504bff irq 20 at device 29.7 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus6: EHCI version 1.0 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 7 pcib5: subordinate bus 7 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci7: <ACPI PCI bus> on pcib5 pci7: domain=0, physical bus=7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel (ID=29298086) AHCI controller> port 0x50e8-0x50ef,0x50fc-0x50ff,0x50e0-0x50e7,0x50f8-0x50fb,0x5020-0x503f mem 0xd8504000-0xd85047ff irq 21 at device 31.2 on pci0 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5020 atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xd8504000 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 56 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC EM eSATA 4ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=3ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 4> on atapci0 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=10ms status=00000113 ata3: ready wait time=0ms ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: eb140101 ata3: AHCI reset done: devices=00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 5> on atapci0 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x5000-0x501f mem 0xd8505000-0xd85050ff irq 18 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5000 ichsmb0: [MPSAFE] ichsmb0: [ITHREAD] smbus0: <System Management Bus> on ichsmb0 acpi_tz0: <Thermal Zone> on acpi0 ACPI Error: No handler for Region [ERAM] (0xffffff0001595980) [EmbeddedControl] 20090521 evregion-430 ACPI Error: Region EmbeddedControl(3) has no handler 20090521 exfldio-382 ACPI Error (psparse-0633): Method parse/execution failed [\\_TZ_.THRM._AC0] (Node 0xffffff000159e3e0), AE_NOT_EXIST atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0067 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6ec98 00223 (v1 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 0xb9e6c618 005B3 (v1 PmRef Cpu0Cst 00003001 INTL 20051117) est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: Invalid id16 (set, cur) = (2073, 18979) est0: Can't check freq 1600, it may be invalid est0: Invalid id16 (set, cur) = (1553, 18979) est0: Can't check freq 1200, it may be invalid p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xb9e6de18 001CF (v1 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 0xb9e6ef18 0008D (v1 PmRef ApCst 00003000 INTL 20051117) est1: <Enhanced SpeedStep Frequency Control> on cpu1 est1: Invalid id16 (set, cur) = (2073, 18979) est1: Can't check freq 1600, it may be invalid est1: Invalid id16 (set, cur) = (1553, 18979) est1: Can't check freq 1200, it may be invalid p4tcc1: <CPU Frequency Thermal Control> on cpu1 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 isab0: found ICH9 or equivalent chipset: Intel ICH9M watchdog timer isa_probe_children: disabling PnP devices ichwd0: <Intel ICH9M watchdog timer> on isa0 isab0: found ICH9 or equivalent chipset: Intel ICH9M watchdog timer ichwd0: Intel ICH9M watchdog timer (ICH9 or equivalent) ichwd0: timer disabled atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 251939 -> 100000 procfs registered lapic: Divisor 2, Frequency 99750557 hz Timecounter "TSC" frequency 2094761655 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire battery0: battery initialization startad4: setting UDMA100 acpi_acad0: acline initialization start ad4: 476940MB <Seagate ST9500325AS 0003HPM1> at ata2-master UDMA100 SATA 3Gb/s ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 acpi_tz0: _AC0: temperature 67.0 >= setpoint 67.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 acpi_tz0: switched from NONE to _AC0: 67.0C system power profile changed to 'economy' acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00010000 ata3: New devices: 00010000 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: setting UDMA100 ata3: device_reset timeout=980us acd0: <HL-DT-ST DVDRAM GT20L/DC03> DVDR drive at ata3 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1024KB buffer, UDMA100 SATA 1.5Gb/s acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4: Identifying devices: 00000000 ata4: New devices: 00000000 battery0: battery initialization done, tried 1 times uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub2: 4 ports with 4 removable, self powered acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed (probe0:ata1:0:0:0): (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): NOT READY asc:3a,1 (probe0:ata1:0:0:0): Medium not present - tray closed Unretryable error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51 msi: Assigning MSI IRQ 257 to local APIC 1 vector 52 Root mount waiting for: usbus6 uhub6: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 ugen6.2: <SanDisk> at usbus6 umass0: <SanDisk SanDisk Cruzer, class 0/0, rev 2.00/2.00, addr 2> on usbus6 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus6 umass0:2:0:-1: Attached to scbus2 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? GEOM: new disk da0 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <SanDisk SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device da0: Serial Number 3550330A15D1E9F5 da0: 40.000MB/s transfers da0: 7691MB (15753215 512 byte sectors: 255H 63S/T 980C) GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. Root mount waiting for: usbus6 ugen6.3: <Generic> at usbus6 umass1: <Bulk-In, Bulk-Out, Interface> on usbus6 umass1: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus6 ugen4.2: <Logitech> at usbus4 ums0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 ums0: 8 buttons and [XYZ] coordinates ID=0 uhid0: <Logitech USB Receiver, class 0/0, rev 1.10/46.00, addr 2> on usbus4 umass1:3:1:-1: Attached to scbus3 (probe0:umass-sim1:1:0:0): Down reving Protocol Version from 2 to 0? (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): CAM Status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI Status: Check Condition (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present (probe0:umass-sim1:1:0:0): (probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim1:1:0:0): NOT READY asc:3a,0 (probe0:umass-sim1:1:0:0): Medium not present Unretryable error (probe0:umass-sim1:1:0:0): error 6 (probe0:umass-sim1:1:0:0): Unretryable Error GEOM: new disk da1 (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error da1 at umass-sim1 bus 1 scbus3 target 0 lun 0 da1: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device da1: Serial Number 20071114173400000 da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error Opened disk da1 -> 6 (da1:umass-sim1:1:0:0): error 6 (da1:umass-sim1:1:0:0): Unretryable Error Opened disk da1 -> 6 Root mount waiting for: usbus6 ugen6.4: <SuYin> at usbus6 Trying to mount root from ufs:/dev/ad4s4a ct_to_ts([2010-01-27 11:36:50]) = 1264592210.000000000 start_init: trying /sbin/init acpi_tz0: switched from _AC0 to NONE: 62.0C ts_to_ct(1264592231.384918675) = [2010-01-27 11:37:11] [-- Attachment #5 --] ******* Working on device /dev/ad4 ******* parameters extracted from in-core disklabel are: cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=969021 heads=16 sectors/track=63 (1008 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 131 (0x83),(Linux native) start 63, size 16771797 (8189 Meg), flag 0 beg: cyl 0/ head 1/ sector 1; end: cyl 1023/ head 11/ sector 63 The data for partition 2 is: sysid 7 (0x07),(NTFS, OS/2 HPFS, QNX-2 (16 bit) or Advanced UNIX) start 16771860, size 75505500 (36867 Meg), flag 80 (active) beg: cyl 1023/ head 255/ sector 63; end: cyl 1023/ head 15/ sector 63 The data for partition 3 is: sysid 5 (0x05),(Extended DOS) start 92277360, size 822078180 (401405 Meg), flag 0 beg: cyl 1023/ head 255/ sector 63; end: cyl 1023/ head 11/ sector 63 The data for partition 4 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 914355540, size 62417628 (30477 Meg), flag 0 beg: cyl 1023/ head 255/ sector 63; end: cyl 1023/ head 15/ sector 63 [-- Attachment #6 --] # /dev/ad4s4: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 4194304 0 4.2BSD 0 0 0 b: 9175040 4194304 swap c: 62417628 0 unused 0 0 # "raw" part, don't edit d: 4194304 13369344 4.2BSD 0 0 0 e: 31221760 17563648 4.2BSD 0 0 0 f: 13632220 48785408 4.2BSD 0 0 0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8b5ad0e11001270926o19d1701fid30ba5a49cbb39b5>