Date: Sun, 3 Oct 2004 12:16:19 -0600 From: Jon Drews <jon.drews@gmail.com> To: freebsd-mobile@freebsd.org Subject: Re: install hangs on IBM Thinkpad X23 Message-ID: <8cb27cbf04100311161d726215@mail.gmail.com> In-Reply-To: <20041003120806.M584@dru.domain.org> References: <20041003120806.M584@dru.domain.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Dru: I came across this advice: This is just a shot in the dark by try doing: sysctl hw.allow_unsupported_io_range=1 Then try loading the snd module. http://lists.freebsd.org/pipermail/freebsd-current/2003-December/016544.html Also this suggestion may help: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=43475+0+archive/2002/freebsd-multimedia/20020414.freebsd-multimedia FWIW, this also works for me on an X23 (2662-E5U to be exact). For the logs, the needed kernel config lines are: device smbus device ichsmb device smb device pcm options PCI_ENABLE_IO_MODES (I seem to get boot hangs if I leave pcm out). --------------------------------------------------------------- The FLCL has a link to these other suggestions: http://web.cs.cmu.edu/~dpelleg/X23_freebsd.html You may want to look there also. Kind regards, Jonathan On Sun, 3 Oct 2004 12:23:15 -0400 (EDT), Dru <dlavigne6@sympatico.ca> wrote: > > Hello, > > I keep running across the same error when installing via floppy for 4.9, > 4.10, and 5.2.1. When the initial kernel loads from mfsroot.flp, it always > hangs solid (requiring a cold boot) at this line: > > pci0: <multimedia, audio> at device 31.5 (no driver attached) >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8cb27cbf04100311161d726215>