Date: Mon, 6 Aug 2007 22:03:46 +0000 From: Wildes Miranda de Oliveira <wildes@itecgyn.com.br> To: freebsd-acpi@freebsd.org Subject: Cant load Marvell Yukon network interface with acpi enabled and AtherosAR5005 with acpi disabled. Message-ID: <903f4bc2118c595b4baf82815ea99ca6@localhost> In-Reply-To: <9e7013bbdabcb7dd359398aa0a5d5ba6@localhost> References: <9e7013bbdabcb7dd359398aa0a5d5ba6@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
> hi list, > > excuse-me my poorly english. > > recently i bought one notebook acer aspire 3680, and i have had problems > for load network interfaces on them. > the problem is that the interface ethernet Marvell Yukon don't load with > acpi enabled, and the interface > wireless Atheros AR5005 don't load with acpi disabled, with this it´s > never load on same bootstrap. > i'm annexing informations about dmesg with acpi enabled/disabled , > acpidump and pciconf -lv. > > i wish ask you about tunning of acpi described in man page. could this > solve my problem ? > > LOADER TUNABLES > Tunables can be set at the loader(8) prompt before booting the kernel > or > stored in /boot/loader.conf. Many of these tunables also have a > matching > > hw.acpi.serialize_methods > > Allow override of whether methods execute in parallel or not. > Enable this for serial behavior, which fixes > "AE_ALREADY_EXISTS" > errors for AML that really cannot handle parallel method > execu- > tion. It is off by default since this breaks recursive > methods > and some IBMs use such code. > > hw.pci.link.%s.%d.irq > > Override the interrupt to use for this link and index. This > capability should be used carefully, and only if a device is > not > working with acpi enabled. "%s" is the name of the link > (e.g., > LNKA). "%d" is the resource index when the link supports > multi- > ple IRQs. Most PCI links only have one IRQ resource, so the > below form should be used. > > hw.pci.link.%s.irq > > Override the interrupt to use. This capability should be > used > carefully, and only if a device is not working with acpi > enabled. > "%s" is the name of the link (e.g., LNKA). > > #================= ACPI DISABLED ==================================== > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.0-CURRENT-200706 #0: Sun Jun 3 18:41:02 UTC 2007 > root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > WARNING: WITNESS option enabled, expect reduced performance. > MPTable: <INTEL Napa ERB > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz (1733.41-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 > > Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> > Features2=0xc109<SSE3,MON,TM2,xTPR,PDCM> > AMD Features=0x100000<NX> > real memory = 526974976 (502 MB) > avail memory = 501780480 (478 MB) > ioapic0: Assuming intbase of 0 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > cpu0 on motherboard > pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem > 0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0300000-0xd033ffff irq 16 at > device 2.0 on pci0 > agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0 > agp0: detected 7932k stolen memory > agp0: aperture size is 256M > vgapci1: <VGA-compatible display> mem 0xd0280000-0xd02fffff at device 2.1 > on pci0 > pci0: <multimedia> at device 27.0 (no driver attached) > pcib1: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <PCI bus> on pcib1 > mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> port 0x2000-0x20ff mem > 0xd0100000-0xd0103fff irq 16 at device 0.0 on pci2 > msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x01> on mskc0 > msk0: Ethernet address: 00:16:36:d1:56:ce > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > ukphy0: <Generic IEEE 802.3u media interface> PHY 3 on miibus0 > ukphy0: no media present > ukphy1: <Generic IEEE 802.3u media interface> PHY 6 on miibus0 > ukphy1: no media present > mskc0: [FILTER] > pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci3: <PCI bus> on pcib2 > pcib3: <PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci4: <PCI bus> on pcib3 > pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0 > pci5: <PCI bus> on pcib4 > uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device > 29.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device > 29.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device > 29.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device > 29.3 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem > 0xd0544000-0xd05443ff irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 8 ports with 8 removable, self powered > pcib5: <MPTable PCI-PCI bridge> at device 30.0 on pci0 > pci10: <PCI bus> on pcib5 > ath0: <Atheros 5212> mem 0xd0000000-0xd000ffff at device 3.0 on pci10 > pcib5: unable to route slot 3 INTA > ath0: could not map interrupt > device_attach: ath0 attach returned 6 > cbb0: <PCI-CardBus Bridge> mem 0xd0014000-0xd0014fff irq 20 at device 9.0 > on pci10 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [ITHREAD] > pci10: <mass storage> at device 9.2 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7M SATA300 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xdf800-0xdffff pnpid > ORM0000 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model Generic PS/2 mouse, device ID 0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > unknown: <PNP0c01> can't assign resources (memory) > unknown: <PNP0303> can't assign resources (port) > unknown: <PNP0c02> can't assign resources (memory) > unknown: <PNP0c02> can't assign resources (memory) > unknown: <PNP0c02> can't assign resources (memory) > unknown: <PNP0c02> can't assign resources (memory) > unknown: <INT0800> can't assign resources (memory) > unknown: <PNP0f13> can't assign resources (irq) > Timecounter "TSC" frequency 1733412980 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 76319MB <TOSHIBA MK8034GSX AH301J> at ata0-master SATA150 > acd0: CDRW <TSSTcorpCDW/DVD TS-L462D/AC01> at ata1-master UDMA33 > GEOM_LABEL: Label for provider ad0s3 is msdosfs/DADOS. > Trying to mount root from ufs:/dev/ad0s1a > msk0: link state changed to UP > > #====================== ACPI ENABLED ==================================== > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.0-CURRENT-200706 #0: Sun Jun 3 18:41:02 UTC 2007 > root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > WARNING: WITNESS option enabled, expect reduced performance. > ACPI APIC Table: <INTEL CALISTGA> > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz (1733.41-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 > > Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> > Features2=0xc109<SSE3,MON,TM2,xTPR,PDCM> > AMD Features=0x100000<NX> > real memory = 526974976 (502 MB) > avail memory = 501760000 (478 MB) > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <ACRSYS ACRPRDCT> on motherboard > acpi0: [ITHREAD] > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 2000 > acpi0: Power Button (fixed) > unknown: I/O range not supported > acpi0: reservation of fed00000, 400 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem > 0xd0200000-0xd027ffff,0xc0000000-0xcfffffff,0xd0300000-0xd033ffff irq 16 at > device 2.0 on pci0 > agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0 > agp0: detected 7932k stolen memory > agp0: aperture size is 256M > vgapci1: <VGA-compatible display> mem 0xd0280000-0xd02fffff at device 2.1 > on pci0 > pci0: <multimedia> at device 27.0 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib1 > mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> irq 16 at device 0.0 on > pci2 > mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). > mskc0: unknown device: id=0x00, rev=0x00 > device_attach: mskc0 attach returned 6 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci4: <ACPI PCI bus> on pcib3 > uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device > 29.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device > 29.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device > 29.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device > 29.3 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem > 0xd0544000-0xd05443ff irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 8 ports with 8 removable, self powered > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci10: <ACPI PCI bus> on pcib4 > ath0: <Atheros 5212> mem 0xd0000000-0xd000ffff at device 3.0 on pci10 > ath0: [ITHREAD] > ath0: using obsoleted if_watchdog interface > ath0: Ethernet address: 00:19:7d:47:ed:84 > ath0: mac 7.8 phy 4.5 radio 5.6 > cbb0: <PCI-CardBus Bridge> mem 0xd0014000-0xd0014fff irq 20 at device 9.0 > on pci10 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [ITHREAD] > pci10: <mass storage> at device 9.2 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7M SATA300 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_acad0: <AC Adapter> on acpi0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model Generic PS/2 mouse, device ID 0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xdf800-0xdffff pnpid > ORM0000 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1733409431 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 76319MB <TOSHIBA MK8034GSX AH301J> at ata0-master SATA150 > acd0: CDRW <TSSTcorpCDW/DVD TS-L462D/AC01> at ata1-master UDMA33 > GEOM_LABEL: Label for provider ad0s3 is msdosfs/DADOS. > Trying to mount root from ufs:/dev/ad0s1a > > #======================== PCICONF -LV ==================================== > > hostb0@pci0:0:0: class=0x060000 card=0x01101025 chip=0x27a08086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = '955XM/945GM/PM/GMS/940GML Express Processor to DRAM > Controller' > class = bridge > subclass = HOST-PCI > vgapci0@pci0:2:0: class=0x030000 card=0x01101025 chip=0x27a28086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Mobile Integrated Graphics Controller' > class = display > subclass = VGA > vgapci1@pci0:2:1: class=0x038000 card=0x01101025 chip=0x27a68086 rev=0x03 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Mobile Integrated Graphics Controller' > class = display > none0@pci0:27:0: class=0x040300 card=0x01101025 chip=0x27d88086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) High Definition Audio' > class = multimedia > pcib1@pci0:28:0: class=0x060400 card=0x01101025 chip=0x27d08086 rev=0x02 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCI Express Root Port' > class = bridge > subclass = PCI-PCI > pcib2@pci0:28:1: class=0x060400 card=0x01101025 chip=0x27d28086 rev=0x02 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCI Express Root Port' > class = bridge > subclass = PCI-PCI > pcib3@pci0:28:2: class=0x060400 card=0x01101025 chip=0x27d48086 rev=0x02 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) PCI Express Root Port' > class = bridge > subclass = PCI-PCI > uhci0@pci0:29:0: class=0x0c0300 card=0x01101025 chip=0x27c88086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > uhci1@pci0:29:1: class=0x0c0300 card=0x01101025 chip=0x27c98086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > uhci2@pci0:29:2: class=0x0c0300 card=0x01101025 chip=0x27ca8086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > uhci3@pci0:29:3: class=0x0c0300 card=0x01101025 chip=0x27cb8086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB Universal Host Controller' > class = serial bus > subclass = USB > ehci0@pci0:29:7: class=0x0c0320 card=0x01101025 chip=0x27cc8086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller' > class = serial bus > subclass = USB > pcib4@pci0:30:0: class=0x060401 card=0x01101025 chip=0x24488086 rev=0xe2 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI > Bridge' > class = bridge > subclass = PCI-PCI > isab0@pci0:31:0: class=0x060100 card=0x01101025 chip=0x27b98086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801GBM (ICH7-M) LPC Interface Controller' > class = bridge > subclass = PCI-ISA > atapci0@pci0:31:2: class=0x010180 card=0x01101025 chip=0x27c48086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage > Controller' > class = mass storage > subclass = ATA > none1@pci0:31:3: class=0x0c0500 card=0x01101025 chip=0x27da8086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82801G (ICH7 Family) SMBus Controller' > class = serial bus > subclass = SMBus > mskc0@pci2:0:0: class=0x020000 card=0x01101025 chip=0x435211ab rev=0x14 > hdr=0x00 > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' > device = 'Yukon 88E8038 PCI-E Fast Ethernet Controller' > class = network > subclass = ethernet > ath0@pci10:3:0: class=0x020000 card=0x04181468 chip=0x001a168c rev=0x01 > hdr=0x00 > vendor = 'Atheros Communications Inc.' > device = 'Atheros AR5005G Atheros AR5005G 802.11abg NIC Chipset' > class = network > subclass = ethernet > cbb0@pci10:9:0: class=0x060700 card=0x01101025 chip=0x8039104c rev=0x00 > hdr=0x02 > vendor = 'Texas Instruments (TI)' > device = 'PCIxx12 Cardbus Controller' > class = bridge > subclass = PCI-CardBus > none2@pci10:9:2: class=0x018000 card=0x01101025 chip=0x803b104c rev=0x00 > hdr=0x00 > vendor = 'Texas Instruments (TI)' > device = 'PCIxx12 Integrated Flash Media Controller' > class = mass storage
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?903f4bc2118c595b4baf82815ea99ca6>