Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 4 Sep 2013 17:02:28 -0300
From:      "Nenhum_de_Nos" <matheus@eternamente.info>
Cc:        freebsd-embedded@freebsd.org
Subject:   Re: Dlink DIR-825 B1 trial
Message-ID:  <9165aa958e7dc206da3515146181c14b.squirrel@arroway.org>
In-Reply-To: <1378316083.1706.0.camel@localhost>
References:  <b9e5a389e69c587c54ac71e70ae47cfd.squirrel@arroway.org> <1378316083.1706.0.camel@localhost>

next in thread | previous in thread | raw e-mail | index | archive | help

On Wed, September 4, 2013 14:34, Sean Bruno wrote:
> On Tue, 2013-09-03 at 20:36 -0300, Nenhum_de_Nos wrote:
>> hail,
>>
>> just splitting that thread. I git it to work, and when ath was on, that got on my screen.
>>
>> is this known ?
>>
>> att,
>>
>> matheus
>>
> No, I don't see this on mine.  Let me fire up it up and see what I get.
>
> sean

for that to happen, I must use the hostapd config you sent the link (wiki, examples) turned on.
without, no issue at all.

thanks,

matheus

>> Starting kernel ...
>>
>> CPU platform: Atheros AR7161 rev 2
>> CPU Frequency=680 MHz
>> CPU DDR Frequency=340 MHz
>> CPU AHB Frequency=170 MHz
>> platform frequency: 680000000
>> CPU reference clock: 40 MHz
>> arguments:
>>   a0 = 00000007
>>   a1 = a3f7bfb0
>>   a2 = a3f7c460
>>   a3 = 00000008
>> Cmd line:argv is invalid
>> Environment:
>> envp is invalid
>> Cache info:
>>   picache_stride    = 4096
>>   picache_loopcount = 16
>>   pdcache_stride    = 4096
>>   pdcache_loopcount = 8
>> cpu0: MIPS Technologies processor v116.147
>>   MMU: Standard TLB, 16 entries
>>   L1 i-cache: 4 ways of 512 sets, 32 bytes per line
>>   L1 d-cache: 4 ways of 256 sets, 32 bytes per line
>>   Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
>>   Config3=0x20
>> KDB: debugger backends: ddb
>> KDB: current backend: ddb
>> Copyright (c) 1992-2013 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>   The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 10.0-CURRENT #0 r254983: Wed Aug 28 15:44:20 BRT 2013
>>     root@dev:/root/work/freebsd/head/obj/mipseb/mips.mips/root/work/freebsd/head/src/sys/DIR-825
>> mips
>> gcc version 4.2.1 20070831 patched [FreeBSD]
>> WARNING: WITNESS option enabled, expect reduced performance.
>> MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:
>>   MEMGUARD map base: 0xc0800000
>>   MEMGUARD map size: 104860 KBytes
>> real memory  = 67108864 (65536K bytes)
>> avail memory = 59285504 (56MB)
>> random device not loaded; using insecure entropy
>> nexus0: <MIPS32 root nexus>
>> clock0: <Generic MIPS32 ticker> on nexus0
>> Timecounter "MIPS32" frequency 340000000 Hz quality 800
>> Event timer "MIPS32" frequency 340000000 Hz quality 800
>> apb0 at irq 4 on nexus0
>> uart0: <16550 or compatible> on apb0
>> uart0: console (115200,n,8,1)
>> pcib0 at irq 0 on nexus0
>> pcib0: ar71xx_pci_attach: missing hint 'baseslot', default to AR71XX_PCI_BASE_SLOT
>> pcib0: found EEPROM at 0x1f661000 on 0.17.0
>> pcib0: EEPROM firmware: 0x1f661000 @ 4096 bytes
>> pcib0: device EEPROM 'pcib.0.bus.0.17.0.eeprom_firmware' registered
>> pcib0: found EEPROM at 0x1f665000 on 0.18.0
>> pcib0: EEPROM firmware: 0x1f665000 @ 4096 bytes
>> pcib0: device EEPROM 'pcib.0.bus.0.18.0.eeprom_firmware' registered
>> pci0: <PCI bus> on pcib0
>> pci0: <network> at device 17.0 (no driver attached)
>> pci0: <network> at device 18.0 (no driver attached)
>> arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
>> arge0: Overriding MAC from EEPROM
>> arge0: Vendor stores MAC in ASCII format
>> arge0: finishing attachment, phymask 0000, proxy null
>> arge0: Ethernet address: 84:c9:b2:5c:c6:bc
>> arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
>> arge1: Overriding MAC from EEPROM
>> arge1: Vendor stores MAC in ASCII format
>> arge1: finishing attachment, phymask 0000, proxy null
>> arge1: Ethernet address: 84:c9:b2:5c:c6:be
>> spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
>> spibus0: <spibus bus> on spi0
>> mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0
>> mx25l0: m25p64, sector 65536 bytes, 128 sectors
>> ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
>> Timecounters tick every 1.000 msec
>> map/rootfs.uncompress: GEOM_ULZMA image found
>> map/rootfs.uncompress: 174 x 131072 blocks
>> WARNING: WITNESS option enabled, expect reduced performance.
>> Trying to mount root from ufs:/dev/map/rootfs.uncompress []...
>> warning: no time-of-day clock registered, system time will not be set accurately
>> Aug 29 02:31:15 init: login_getclass: unknown class 'daemon'
>> *** Populating /var ..
>> *** Loading configuration files ..
>> *** Restoring from /dev/map/cfg ..
>> 1+0 records in
>> 1+0 records out
>> 65536 bytes transferred in 4.150455 secs (15790 bytes/sec)
>> gunzip: (stdin): trailing garbage ignored
>> etc/cfg/manifest
>> etc/master.passwd
>> etc/group
>> etc/cfg/rc.conf
>> etc/cfg/hostapd.wlan0.conf
>> etc/cfg/hostapd.wlan1.conf
>> 10 blocks
>> *** Completed.
>> *** setting up hostname
>> *** Load kernel modules
>> random: <Software, Yarrow> initialized
>> ath0: <Atheros 9220> irq 0 at device 17.0 on pci0
>> ath0: ath_pci_attach: EEPROM firmware @ 0xc6ecb000
>> ath0: [HT] enabling HT modes
>> ath0: [HT] 1 stream STBC receive enabled
>> ath0: [HT] 1 stream STBC transmit enabled
>> ath0: [HT] 2 RX streams; 2 TX streams
>> ath0: AR9220 mac 128.2 RF5133 phy 13.0
>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
>> ath1: <Atheros 9220> irq 1 at device 18.0 on pci0
>> ath1: ath_pci_attach: EEPROM firmware @ 0xc6ece000
>> [ath] enabling AN_TOP2_FIXUP
>> ath1: [HT] enabling HT modes
>> ath1: [HT] 1 stream STBC receive enabled
>> ath1: [HT] 1 stream STBC transmit enabled
>> ath1: [HT] 2 RX streams; 2 TX streams
>> ath1: AR9220 mac 128.2 RF5133 phy 13.0
>> ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
>> *** bringing up loopback ..
>> *** Starting networking via /etc/rc.d/base/net
>> dev.ath.0.txq_mcastq_maxdepth: 512 -> 32
>> dev.ath.1.txq_mcastq_maxdepth: 512 -> 32
>> *** Interface: arge0: start
>> *** Interface: arge0: done
>> *** Interface: wlan0: start
>> wlan0: Ethernet address: 20:11:91:53:59:44
>> ifconfig: unknown/undefined channel number 36 flags 0x0
>> *** Starting hostapd..
>> Configuration file: /etc/cfg/hostapd.wlan0.conf
>> Using interface wlan0 with hwaddr 20:11:91:53:59:44 and ssid "WLAN-TT_"
>> ieee80211_load_module: load the wlan_tkip module by hand for now.
>> ioctl[SIOCS80211, op=19, val=0, arg_len=64]: Device not configured
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> *** Interface: wlan0: done
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> *** Interface: wlan1: start
>> wlan1: Ethernet address: 59:44:91:53:20:11
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ifconfig: unknown/undefined channel number 6 flags 0x480
>> *** Starting hostapd..
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> Configuration file: /etc/cfg/hostapd.wlan1.conf
>> Using interface wlan1 with hwaddr 59:44:91:53:20:11 and ssid "WLAN-T_"
>> [zone: mbuf_cluster] kern.ipc.nmbclusters limit reached
>> ieee80211_load_module: load the wlan_ccmp module by hand for now.
>> ioctl[SIOCS80211, op=19, val=0, arg_len=64]: Device not configured
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> *** Interface: wlan1: done
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> *** Interface: bridge0: start
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> bridge0: Ethernet address: 7e:5b:05:9f:59:79
>> wlan0: promiscuous mode enabled
>> bridge0: link state changed to UP
>> ar5416StopDmaReceive: dma failed to stop in 10ms
>> AR_CR=0x00000024
>> AR_DIAG_SW=0x42000020
>> wlan1: start 60 second CAC timer on channel 52 (5260 MHz)
>> wlan1: promiscuous mode enabled
>> arge0: promiscuous mode enabled
>> *** Interface: bridge0: done
>> *** Default password/login databases ..
>> *** inetd
>> *** Done!
>>
>> FreeBSD/mips (freebsd-wifi-build) (ttyu0)
>>
>> login: wlan1: CAC timer on channel 52 (5260 MHz) expired; no radar detected
>> wlan1: ieee80211_new_state_locked: pending CAC -> RUN transition lost
>> lock order reversal: (sleepable after non-sleepable)
>>  1st 0xc70a3014 ath1_com_lock (ath1_com_lock) @
>> /root/work/freebsd/head/src/sys/modules/wlan/../../net80211/ieee80211_scan.c:686
>>  2nd 0x8036dff8 user map (user map) @ /root/work/freebsd/head/src/sys/vm/vm_glue.c:168
>> KDB: stack backtrace:
>> db_trace_thread+30 (?,?,?,?) ra c836189000000018 sp 0 sz 0
>> db_trace_self+1c (?,?,?,?) ra c83618a800000018 sp 0 sz 0
>> 8007ad18+34 (?,?,?,?) ra c83618c0000001a0 sp 0 sz 0
>> kdb_backtrace+44 (?,?,?,?) ra c8361a6000000018 sp 0 sz 0
>> 801704b8+34 (?,?,?,?) ra c8361a7800000020 sp 0 sz 0
>> witness_checkorder+b0c (?,?,802f97d4,a8) ra c8361a9800000050 sp 0 sz 1
>> _sx_slock+c0 (?,?,?,?) ra c8361ae800000030 sp 0 sz 0
>> _vm_map_lock_read+40 (?,?,?,?) ra c8361b1800000018 sp 0 sz 0
>> useracc+80 (?,?,?,?) ra c8361b3000000028 sp 0 sz 0
>> 802a7dc4+dc (?,?,?,?) ra c8361b5800000040 sp 0 sz 0
>> trap+e6c (?,?,?,?) ra c8361b98000000b8 sp 0 sz 0
>> MipsKernGenException+134 (ffff,9,806089b0,0) ra c8361c50000000c8 sp 100000001 sz 1
>> hostap_newstate+358 (?,?,?,?) ra c8361d1800000038 sp 0 sz 0
>> ath_newstate+2c0 (?,?,?,?) ra c8361d5000000058 sp 0 sz 0
>> ieee80211_newstate_cb+20c (?,?,?,?) ra c8361da800000040 sp 0 sz 0
>> 801630c8+e8 (?,?,?,?) ra c8361de800000038 sp 0 sz 0
>> taskqueue_thread_loop+8c (?,?,?,?) ra c8361e2000000038 sp 0 sz 0
>> fork_exit+b0 (?,?,?,?) ra c8361e5800000028 sp 0 sz 0
>> fork_trampoline+10 (?,?,?,?) ra c8361e8000000000 sp 0 sz 0
>> pid 0
>> Trap cause = 4 (address error (load or I-fetch) - kernel mode)
>> [ thread pid 0 tid 100043 ]
>> Stopped at      hostap_newstate+0x358:  lw      v0,0(a0)
>> db>
>>
>>
>
>


-- 
We will call you Cygnus,
The God of balance you shall be

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

http://en.wikipedia.org/wiki/Posting_style



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9165aa958e7dc206da3515146181c14b.squirrel>