Date: Thu, 11 May 2000 13:07:40 +1100 From: Anatol Golokolos <avg@amur.rosnet.ru> To: freebsd-mobile@FreeBSD.ORG Subject: WaveLan & 200MMX Problem Message-ID: <9547.000511@amur.rosnet.ru>
next in thread | raw e-mail | index | archive | help
I have tried to use driver wl for FreeBSD 3.4-RELEASE on desktop.
I have enabled pcmcia support and the wl driver in the kernel with the following entries.
controller card0
device pcic0 at card?
device wl0 at isa? port 0x300 net irq?
^^^^^^^^^^^^^^
I've tried 0x100,0x300,0x3e0,0x280,
0x390 irq 5,7
I use Lucent WaveLan/PCMCIA ISA a card with Vadem 469.
Unix speaks "wl0 not found".
I have motherboard Iwill P55XB2 on chipset i430TX CPU 200MMX.
I bring below dmesg received on boot -v .
Origin = "GenuineIntel" Id = 0x544 Stepping = 4
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x002c7000 - 0x03ffdfff, 64188416 bytes (15671 pages)
avail memory = 62439424 (60976K bytes)
Found BIOS32 Service Directory header at 0xc00faf40
Entry = 0xfb3c0 (0xc00fb3c0) Rev = 0 Len = 1
PCI BIOS entry at 0xb3f0
SMIBIOS header at 0xc00f5630
Version 2.2
Table at 0xf0800, 32 entries, 811 bytes, largest entry 74 bytes
DMI header at 0xc00f5640
Version 2.2
Table at 0xf0800, 32 entries, 811 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fc000
Preloaded elf kernel "kernel" at 0xc02b2000.
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
Probing for devices on PCI bus 0:
found-> vendor=0x8086, dev=0x7100, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 0000f000, size 4
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
intel_piix_status: primary master sample = 3, master recovery = 1
intel_piix_status: primary master fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: primary slave sample = 3, slave recovery = 1
intel_piix_status: primary slave fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
ide_pci: busmaster 0 status: 64 from port: 0000f002
ide_pci: ide0:0 has been configured for DMA by BIOS
ide_pci: ide0:1 has been configured for DMA by BIOS
intel_piix_status: secondary master sample = 3, master recovery = 3
intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: secondary slave sample = 3, slave recovery = 1
intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 1 status: 20 from port: 0000f00a
ide_pci: ide1:0 has been configured for DMA by BIOS
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=255
map[0]: type 4, range 32, base 00006400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
found-> vendor=0x5333, dev=0x8811, revid=0x44
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 1, range 32, base e0000000, size 26
vga0: <S3 Trio graphics accelerator> rev 0x44 int a irq 11 on pci0.9.0
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 1, range 32, base e4100000, size 12
map[1]: type 4, range 32, base 00006800, size 6
map[2]: type 1, range 32, base e4000000, size 20
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x08 int a irq 10 on pci0.12.0
fxp0: Ethernet address 00:90:27:57:a4:e7
bpf: fxp0 attached
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
internet last message repeated 2 times
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
psm0 not found
sio0: irq maps: 0x1 0x11 0x11 0x11
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x9 0x9
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
...............................................
wl0 not found at 0x300
ppc0 not found
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
....................
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 175377060 bytes/sec
bzero() bandwidth = 763941940 bytes/sec
apm0: disabled, not probed.
imasks: bio c008c040, tty c007041a, net c007041a
device combination doesn't support shared irq3
intr_connect(irq3) failed, result=-1
device combination doesn't support shared irq4
intr_connect(irq4) failed, result=-1
device combination doesn't support shared irq10
intr_connect(irq10) failed, result=-1
device combination doesn't support shared irq14
intr_connect(irq14) failed, result=-1
device combination doesn't support shared irq15
intr_connect(irq15) failed, result=-1
PC-Card Vadem 469 (5 mem & 2 I/O windows)
pcic: controller irq 5
Initializing PC-card drivers: sio
..................
0 accounted for
Device configuration finished.
Intel Pentium detected, installing workaround for F00F bug
bpf: tun0 attached
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio c008c040, tty c007041a, net c007041a
bpf: lo0 attached
.......................................
start_init: trying /sbin/init
Card inserted, slot 0
Linux-ELF exec handler installed
Mine of Windows98 establishes the following parameters:
PCMCIA controller are confugured at:
I/O: 3E0-3E1
IRQ: 7
WaveLan PCMCIA Adapter are configured at:
IRQ: 5
IO = 110-11F
MEM = D8000-DFFFF
I tried to establish these parameters, but - does not work.
I also tried to establish installations by default, has touched everything, that has found in a manual -
Does not work!
What to me to do????
Best regards,
Anatol mailto:avg@amur.rosnet.ru
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9547.000511>