Date: Sat, 25 Nov 2006 12:41:23 +0800 From: "L O" <nwanglu@gmail.com> To: freebsd-multimedia@freebsd.org Subject: HELP About sound card [Conexant AC-Link 2 Channel Audio] :) Message-ID: <98a12e2b0611242041o72cd4156y782ae70202a02c24@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
is there someone can help me about this.... thanks :) 1.i installed 6.1 freebsd release 2.first i run kldload snd_driver and get my sound drier information is snd_ich 3.i add device sound,device snd_ich to kernel ,build it and install it. 4.startx to gnome, i found i can't get any voice from my notebook(SUCH AS PLAY A MP3 BY XMMS),the volume control->file->change device shows : "unknow volume control 0(OSS MIXER)". 5.there 's no dsp folder in my /dev. Notebook Hardware : lenovo tianyi 200 d mainboard : 915gm sound card : Conexant AC-Link 2 Channel Audio(ac97) dmesg : pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xb0040800-0xb00409ff,0xb0040400-0xb00404ff irq 17 at device 30.2 on pci0 pcm0: <Unknown AC97 Codec (id = 0x43585431)> sndstat: FreeBSD Audio Driver (newpcm) Installed devices: pcm0: <Intel ICH6 (82801FB)> at io 0xb0040800, 0xb0040400 irq 17 bufsz 16384 kld snd_ich (1p/1r/0v channels duplex default) kldstat Id Refs Address Size Name 1 33 0xc0400000 6a29c0 kernel 2 1 0xc0aa3000 58554 acpi.ko 3 1 0xc4972000 16000 linux.ko 4 1 0xc4a51000 2000 snd_driver.ko 5 1 0xc4a53000 5000 snd_vibes.ko 6 29 0xc4a58000 1c000 sound.ko 7 1 0xc4a7d000 4000 snd_via82c686.ko 8 1 0xc4a91000 5000 snd_via8233.ko 9 1 0xc4a97000 4000 snd_t4dwave.ko 10 1 0xc4aa5000 5000 snd_solo.ko 11 4 0xc4aaa000 4000 snd_sbc.ko 12 1 0xc4aae000 4000 snd_sb8.ko 13 1 0xc4ab3000 4000 snd_sb16.ko 14 1 0xc4ac2000 10000 snd_neomagic.ko 15 2 0xc4ab7000 9000 snd_mss.ko 16 1 0xc4ad6000 8000 snd_maestro3.ko 17 1 0xc4aed000 a000 snd_maestro.ko 18 1 0xc4af7000 5000 snd_ich.ko 19 1 0xc4b10000 4000 snd_fm801.ko 20 2 0xc4b14000 4000 snd_ess.ko 21 1 0xc4b1a000 6000 snd_es137x.ko 22 1 0xc4b20000 6000 snd_emu10k1.ko 23 1 0xc4b26000 b000 snd_ds1.ko 24 2 0xc4b41000 6000 snd_csa.ko 25 1 0xc4b47000 5000 snd_cs4281.ko 26 1 0xc4b4c000 4000 snd_cmi.ko 27 1 0xc4b50000 5000 snd_atiixp.ko 28 1 0xc4b56000 4000 snd_als4000.ko 29 1 0xc4b5a000 4000 snd_ad1816.ko full dmesg : Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #2: Sat Nov 25 03:12:56 CST 2006 root@wanglu.bsd:/usr/obj/usr/src/sys/MATT ACPI APIC Table: <INTEL ALVISO > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.73GHz (1750.28-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 795738112 (758 MB) avail memory = 769380352 (733 MB) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD RSDT> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0 unknown: I/O range not supported Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 drmsub0: <Intel i915GM> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0 error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP. device_attach: drmsub0 attach returned 12 pci0: <display> at device 2.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0040000-0xb00403ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ugen0: vendor 0x0402 USB2.0 Camera, rev 2.00/1.00, addr 2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib2 cbb0: <PCI-CardBus Bridge> mem 0xb8006000-0xb8006fff irq 16 at device 1.0 on pci6 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci6: <serial bus, FireWire> at device 1.2 (no driver attached) pci6: <mass storage> at device 1.3 (no driver attached) pci6: <network> at device 3.0 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0x4000-0x40ff mem 0xb8007800-0xb80078ff irq 16 at device 8.0 on pci6 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:c0:9f:a4:00:20 pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xb0040800-0xb00409ff,0xb0040400-0xb00404ff irq 17 at device 30.2 on pci0 pcm0: <Unknown AC97 Codec (id = 0x43585431)> pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 battery0: <ACPI Smart Battery> on acpi0 sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcf7ff,0xdf800-0xdffff,0xe0000-0xe3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1750282699 Hz quality 800 Timecounters tick every 1.000 msec ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: 53876MB <FUJITSU MHV2060AT 000000A0> at ata0-master UDMA33 acd0: CDRW <PHILIPS CD-RW/DVD-ROM SCB5265/TX08> at ata0-slave UDMA33 Trying to mount root from ufs:/dev/ad0s1a rl0: link state changed to UP ls dev acd0 acpi ad0 ad0s1 ad0s1a ad0s1b ad0s1c ad0s1d ad0s1e ad0s1f agpgart apm ata atkbd0 audio0.0 audio0.1 bpsm0 console consolectl ctty cuad0 cuad0.init cuad0.lock devctl devstat dsp0.0 dsp0.1 dspW0.0 dspW0.1 dspr0.1 fd fido fw0 fw0.0 fwmem0 fwmem0.0 geom.ctl io kbd0 kbd1 kbdmux0 klog kmem log mdctl mem mixer0 net net1 net2 net3 network nfs4 nfslock null pccard0.cis pci psm0 random sndstat stderr stdin stdout sysmouse ttyd0 ttyd0.init ttyd0.lock ttyv0 ttyv1 ttyv2 ttyv3 ttyv4 ttyv5 ttyv6 ttyv7 ttyv8 ttyv9 ttyva ttyvb ttyvc ttyvd ttyve ttyvf ugen0 ugen0.1 ugen0.2 ums0 urandom usb usb0 usb1 usb2 usb3 usb4 xpt0 zero
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?98a12e2b0611242041o72cd4156y782ae70202a02c24>