Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 17 Jan 2015 11:26:14 +0200
From:      Mihai-Alexandru Vintila <unixro@gmail.com>
To:        "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org>
Subject:   Re: Poor performance on Intel P3600 NVME driver
Message-ID:  <A6A24F93-9BF9-466D-9B1D-CEEE003D6CFE@gmail.com>
In-Reply-To: <54B99DA1.2000001@multiplay.co.uk>
References:  <54B7F769.40605@gmail.com> <20150115175927.GA19071@zxy.spb.ru> <54B8C7E9.3030602@gmail.com> <CAKAYmM%2BEpvOYfFnF1i02aoTC2vfVT%2Bq=6XvCPBnYg-mRQAVD1A@mail.gmail.com> <CAORpBLUYzHw%2BRRccRpkcxYrnjnckRMLyAc86J9UPpirRSeWxqQ@mail.gmail.com> <20150116221344.GA72201@pit.databus.com> <54B999C6.2090909@gmail.com> <54B99DA1.2000001@multiplay.co.uk>

next in thread | previous in thread | raw e-mail | index | archive | help
Trim is already disabled as you can see in previous mail

Best regards,
Mihai Vintila

> On 17 ian. 2015, at 01:24, Steven Hartland <killing@multiplay.co.uk> wrote=
:
>=20
> Any difference if you disable trim?
>=20
>> On 16/01/2015 23:07, Mihai Vintila wrote:
>> I've remade the test with atime=3Doff. Drive has 512b physical, but I've c=
reated it with 4k gnop anyway. Results are similar with atime
>>        Processor cache line size set to 32 bytes.
>>        File stride size set to 17 * record size.
>> random  random bk wd   record   stride
>>              KB  reclen   write rewrite    read    reread read write re a=
d  rewrite     read   fwrite frewrite   fread  freread
>>         1048576       4   74427       0   101744        0 93529 47925
>>         1048576       8   39072       0    64693        0 61104 25452
>>=20
>> I've also tried to increase vfs.zfs.vdev.aggregation_limit and ended up w=
ith a crash (screenshot attached)
>>=20
>> I'm attaching zfs tunables:
>> sysctl -a|grep vfs.zfs
>> vfs.zfs.arc_max: 34359738368
>> vfs.zfs.arc_min: 4294967296
>> vfs.zfs.arc_average_blocksize: 8192
>> vfs.zfs.arc_meta_used: 5732232
>> vfs.zfs.arc_meta_limit: 8589934592
>> vfs.zfs.l2arc_write_max: 8388608
>> vfs.zfs.l2arc_write_boost: 8388608
>> vfs.zfs.l2arc_headroom: 2
>> vfs.zfs.l2arc_feed_secs: 1
>> vfs.zfs.l2arc_feed_min_ms: 200
>> vfs.zfs.l2arc_noprefetch: 1
>> vfs.zfs.l2arc_feed_again: 1
>> vfs.zfs.l2arc_norw: 1
>> vfs.zfs.anon_size: 32768
>> vfs.zfs.anon_metadata_lsize: 0
>> vfs.zfs.anon_data_lsize: 0
>> vfs.zfs.mru_size: 17841664
>> vfs.zfs.mru_metadata_lsize: 858624
>> vfs.zfs.mru_data_lsize: 13968384
>> vfs.zfs.mru_ghost_size: 0
>> vfs.zfs.mru_ghost_metadata_lsize: 0
>> vfs.zfs.mru_ghost_data_lsize: 0
>> vfs.zfs.mfu_size: 4574208
>> vfs.zfs.mfu_metadata_lsize: 465408
>> vfs.zfs.mfu_data_lsize: 4051456
>> vfs.zfs.mfu_ghost_size: 0
>> vfs.zfs.mfu_ghost_metadata_lsize: 0
>> vfs.zfs.mfu_ghost_data_lsize: 0
>> vfs.zfs.l2c_only_size: 0
>> vfs.zfs.dedup.prefetch: 1
>> vfs.zfs.nopwrite_enabled: 1
>> vfs.zfs.mdcomp_disable: 0
>> vfs.zfs.dirty_data_max: 4294967296
>> vfs.zfs.dirty_data_max_max: 4294967296
>> vfs.zfs.dirty_data_max_percent: 10
>> vfs.zfs.dirty_data_sync: 67108864
>> vfs.zfs.delay_min_dirty_percent: 60
>> vfs.zfs.delay_scale: 500000
>> vfs.zfs.prefetch_disable: 1
>> vfs.zfs.zfetch.max_streams: 8
>> vfs.zfs.zfetch.min_sec_reap: 2
>> vfs.zfs.zfetch.block_cap: 256
>> vfs.zfs.zfetch.array_rd_sz: 1048576
>> vfs.zfs.top_maxinflight: 32
>> vfs.zfs.resilver_delay: 2
>> vfs.zfs.scrub_delay: 4
>> vfs.zfs.scan_idle: 50
>> vfs.zfs.scan_min_time_ms: 1000
>> vfs.zfs.free_min_time_ms: 1000
>> vfs.zfs.resilver_min_time_ms: 3000
>> vfs.zfs.no_scrub_io: 0
>> vfs.zfs.no_scrub_prefetch: 0
>> vfs.zfs.metaslab.gang_bang: 131073
>> vfs.zfs.metaslab.fragmentation_threshold: 70
>> vfs.zfs.metaslab.debug_load: 0
>> vfs.zfs.metaslab.debug_unload: 0
>> vfs.zfs.metaslab.df_alloc_threshold: 131072
>> vfs.zfs.metaslab.df_free_pct: 4
>> vfs.zfs.metaslab.min_alloc_size: 10485760
>> vfs.zfs.metaslab.load_pct: 50
>> vfs.zfs.metaslab.unload_delay: 8
>> vfs.zfs.metaslab.preload_limit: 3
>> vfs.zfs.metaslab.preload_enabled: 1
>> vfs.zfs.metaslab.fragmentation_factor_enabled: 1
>> vfs.zfs.metaslab.lba_weighting_enabled: 1
>> vfs.zfs.metaslab.bias_enabled: 1
>> vfs.zfs.condense_pct: 200
>> vfs.zfs.mg_noalloc_threshold: 0
>> vfs.zfs.mg_fragmentation_threshold: 85
>> vfs.zfs.check_hostid: 1
>> vfs.zfs.spa_load_verify_maxinflight: 10000
>> vfs.zfs.spa_load_verify_metadata: 1
>> vfs.zfs.spa_load_verify_data: 1
>> vfs.zfs.recover: 0
>> vfs.zfs.deadman_synctime_ms: 1000000
>> vfs.zfs.deadman_checktime_ms: 5000
>> vfs.zfs.deadman_enabled: 1
>> vfs.zfs.spa_asize_inflation: 24
>> vfs.zfs.txg.timeout: 5
>> vfs.zfs.vdev.cache.max: 16384
>> vfs.zfs.vdev.cache.size: 0
>> vfs.zfs.vdev.cache.bshift: 16
>> vfs.zfs.vdev.trim_on_init: 0
>> vfs.zfs.vdev.mirror.rotating_inc: 0
>> vfs.zfs.vdev.mirror.rotating_seek_inc: 5
>> vfs.zfs.vdev.mirror.rotating_seek_offset: 1048576
>> vfs.zfs.vdev.mirror.non_rotating_inc: 0
>> vfs.zfs.vdev.mirror.non_rotating_seek_inc: 1
>> vfs.zfs.vdev.max_active: 1000
>> vfs.zfs.vdev.sync_read_min_active: 32
>> vfs.zfs.vdev.sync_read_max_active: 32
>> vfs.zfs.vdev.sync_write_min_active: 32
>> vfs.zfs.vdev.sync_write_max_active: 32
>> vfs.zfs.vdev.async_read_min_active: 32
>> vfs.zfs.vdev.async_read_max_active: 32
>> vfs.zfs.vdev.async_write_min_active: 32
>> vfs.zfs.vdev.async_write_max_active: 32
>> vfs.zfs.vdev.scrub_min_active: 1
>> vfs.zfs.vdev.scrub_max_active: 2
>> vfs.zfs.vdev.trim_min_active: 1
>> vfs.zfs.vdev.trim_max_active: 64
>> vfs.zfs.vdev.aggregation_limit: 131072
>> vfs.zfs.vdev.read_gap_limit: 32768
>> vfs.zfs.vdev.write_gap_limit: 4096
>> vfs.zfs.vdev.bio_flush_disable: 0
>> vfs.zfs.vdev.bio_delete_disable: 0
>> vfs.zfs.vdev.trim_max_bytes: 2147483648
>> vfs.zfs.vdev.trim_max_pending: 64
>> vfs.zfs.max_auto_ashift: 13
>> vfs.zfs.min_auto_ashift: 9
>> vfs.zfs.zil_replay_disable: 0
>> vfs.zfs.cache_flush_disable: 0
>> vfs.zfs.zio.use_uma: 1
>> vfs.zfs.zio.exclude_metadata: 0
>> vfs.zfs.sync_pass_deferred_free: 2
>> vfs.zfs.sync_pass_dont_compress: 5
>> vfs.zfs.sync_pass_rewrite: 2
>> vfs.zfs.snapshot_list_prefetch: 0
>> vfs.zfs.super_owner: 0
>> vfs.zfs.debug: 0
>> vfs.zfs.version.ioctl: 4
>> vfs.zfs.version.acl: 1
>> vfs.zfs.version.spa: 5000
>> vfs.zfs.version.zpl: 5
>> vfs.zfs.vol.mode: 1
>> vfs.zfs.trim.enabled: 0
>> vfs.zfs.trim.txg_delay: 32
>> vfs.zfs.trim.timeout: 30
>> vfs.zfs.trim.max_interval: 1
>>=20
>> And nvm:
>> ev.nvme.%parent:
>> dev.nvme.0.%desc: Generic NVMe Device
>> dev.nvme.0.%driver: nvme
>> dev.nvme.0.%location: slot=3D0 function=3D0 handle=3D\_SB_.PCI0.BR3A.D08A=

>> dev.nvme.0.%pnpinfo: vendor=3D0x8086 device=3D0x0953 subvendor=3D0x8086 s=
ubdevice=3D0x370a class=3D0x010802
>> dev.nvme.0.%parent: pci4
>> dev.nvme.0.int_coal_time: 0
>> dev.nvme.0.int_coal_threshold: 0
>> dev.nvme.0.timeout_period: 30
>> dev.nvme.0.num_cmds: 811857
>> dev.nvme.0.num_intr_handler_calls: 485242
>> dev.nvme.0.reset_stats: 0
>> dev.nvme.0.adminq.num_entries: 128
>> dev.nvme.0.adminq.num_trackers: 16
>> dev.nvme.0.adminq.sq_head: 12
>> dev.nvme.0.adminq.sq_tail: 12
>> dev.nvme.0.adminq.cq_head: 8
>> dev.nvme.0.adminq.num_cmds: 12
>> dev.nvme.0.adminq.num_intr_handler_calls: 7
>> dev.nvme.0.adminq.dump_debug: 0
>> dev.nvme.0.ioq0.num_entries: 256
>> dev.nvme.0.ioq0.num_trackers: 128
>> dev.nvme.0.ioq0.sq_head: 69
>> dev.nvme.0.ioq0.sq_tail: 69
>> dev.nvme.0.ioq0.cq_head: 69
>> dev.nvme.0.ioq0.num_cmds: 811845
>> dev.nvme.0.ioq0.num_intr_handler_calls: 485235
>> dev.nvme.0.ioq0.dump_debug: 0
>> dev.nvme.1.%desc: Generic NVMe Device
>> dev.nvme.1.%driver: nvme
>> dev.nvme.1.%location: slot=3D0 function=3D0 handle=3D\_SB_.PCI0.BR3B.H000=

>> dev.nvme.1.%pnpinfo: vendor=3D0x8086 device=3D0x0953 subvendor=3D0x8086 s=
ubdevice=3D0x370a class=3D0x010802
>> dev.nvme.1.%parent: pci5
>> dev.nvme.1.int_coal_time: 0
>> dev.nvme.1.int_coal_threshold: 0
>> dev.nvme.1.timeout_period: 30
>> dev.nvme.1.num_cmds: 167
>> dev.nvme.1.num_intr_handler_calls: 163
>> dev.nvme.1.reset_stats: 0
>> dev.nvme.1.adminq.num_entries: 128
>> dev.nvme.1.adminq.num_trackers: 16
>> dev.nvme.1.adminq.sq_head: 12
>> dev.nvme.1.adminq.sq_tail: 12
>> dev.nvme.1.adminq.cq_head: 8
>> dev.nvme.1.adminq.num_cmds: 12
>> dev.nvme.1.adminq.num_intr_handler_calls: 8
>> dev.nvme.1.adminq.dump_debug: 0
>> dev.nvme.1.ioq0.num_entries: 256
>> dev.nvme.1.ioq0.num_trackers: 128
>> dev.nvme.1.ioq0.sq_head: 155
>> dev.nvme.1.ioq0.sq_tail: 155
>> dev.nvme.1.ioq0.cq_head: 155
>> dev.nvme.1.ioq0.num_cmds: 155
>> dev.nvme.1.ioq0.num_intr_handler_calls: 155
>> dev.nvme.1.ioq0.dump_debug: 0
>>=20
>> Best regards,
>> Vintila Mihai Alexandru
>>=20
>>> On 1/17/2015 12:13 AM, Barney Wolff wrote:
>>> I suspect Linux defaults to noatime - at least it does on my rpi.  I
>>> believe the FreeBSD default is the other way.  That may explain some
>>> of the difference.
>>>=20
>>> Also, did you use gnop to force the zpool to start on a 4k boundary?
>>> If not, and the zpool happens to be offset, that's another big hit.
>>> Same for ufs, especially if the disk has logical sectors of 512 but
>>> physical of 4096.  One can complain that FreeBSD should prevent, or
>>> at least warn about, this sort of foot-shooting.
>>>=20
>>>> On Fri, Jan 16, 2015 at 10:21:07PM +0200, Mihai-Alexandru Vintila wrote=
:
>>>> @Barney Wolff it's a new pool with only changes recordsize=3D4k and
>>>> compression=3Dlz4 . On linux test is on ext4 with default values. Penal=
ty is
>>>> pretty high. Also there is a read penalty for read as well between ufs a=
nd
>>>> zfs. Even on nvmecontrol perftest you can see the read penalty it's not=

>>>> normal to have same result for both write and read
>>=20
>> _______________________________________________
>> freebsd-stable@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"=

>=20
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A6A24F93-9BF9-466D-9B1D-CEEE003D6CFE>