Date: Wed, 4 Apr 2012 23:11:22 +0530 From: "Desai, Kashyap" <Kashyap.Desai@lsi.com> To: "Kenneth D. Merry" <ken@freebsd.org> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org>, "gibbs@freebsd.org" <gibbs@freebsd.org>, "McConnell, Stephen" <Stephen.McConnell@lsi.com> Subject: RE: FreeBSD multi Lun detection query Message-ID: <B2FD678A64EAAD45B089B123FDFC3ED72B96EF8F56@inbmail01.lsi.com> In-Reply-To: <20120404152801.GA70760@nargothrond.kdm.org> References: <B2FD678A64EAAD45B089B123FDFC3ED72B96EF8E7A@inbmail01.lsi.com> <20120404152801.GA70760@nargothrond.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: Kenneth D. Merry [mailto:ken@freebsd.org] > Sent: Wednesday, April 04, 2012 8:58 PM > To: Desai, Kashyap > Cc: freebsd-scsi@freebsd.org; McConnell, Stephen; gibbs@freebsd.org > Subject: Re: FreeBSD multi Lun detection query >=20 > On Wed, Apr 04, 2012 at 11:03:04 +0530, Desai, Kashyap wrote: > > Hi, > > > > Our test team has one test case, where they need to verify multi lun > detection by FreeBS8.2 OS. > > Here are the steps to reproduce. > > > > Step 1: Configured Multi-Luns in RBOD (DOTHILL) and map to controller > which is booted with FreeBSD > > Step 2: Issue the command "camcontrol rescan all" and "camcontrol dev" > > > > Expected Result: the command should display all the configured luns > > > > Actual Result: Only the first Lun is discovered > > > > Note: When we issue explicit scan using "camcontrol rescan > bus:target:lun", it detects that specific lun. > > > > Query: How does FreeBSD detect multi luns ? Driver issue > XPT_BUS_RESCAN and expect OS should detect both the luns. > > Is there any limitation associated with multi lun in FreeBSD ? >=20 > A couple of questions: >=20 > - Do you have change 231716 in your version of the driver? The max_lun > field of the path inquiry CCB was set to 0, which disabled multiple > LUN > scanning. I set it to 8, but in reality it needs to be set to the > maximum LUN supported by the chip. Hi Ken, This is very good information. I was not aware of this max_lun fiel= d. We used FreeBSD-8.2-RELEASE. I can ask test team to verify with latest upst= ream.(rev 231716) What about FreeBSD-9-RELEASE ? Is max_luns are set to non-zero. ? >=20 > - What LUN numbers do you have configured on the array? Not sure what is correct answer for this. _but_ we have created two luns. A= nd expected to see lun 0 and lun 1. ~ Kashyap >=20 > Ken > -- > Kenneth Merry > ken@FreeBSD.ORG
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B2FD678A64EAAD45B089B123FDFC3ED72B96EF8F56>