Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 15 Jun 2011 05:09:55 -0400
From:      Joshua Boyd <boydjd@jbip.net>
To:        Jeremy Chadwick <freebsd@jdc.parodius.com>
Cc:        freebsd-stable <freebsd-stable@freebsd.org>, "Vogel, Jack" <jack.vogel@intel.com>
Subject:   Re: em0 watchdog timeouts on 8-STABLE
Message-ID:  <BANLkTim_Y30cXNtvOGg_%2Bj4devU5VtiMxA@mail.gmail.com>
In-Reply-To: <20110615075754.GA54879@icarus.home.lan>
References:  <BANLkTinoyV61RzkB8HbHe=AY8zsBov4JXg@mail.gmail.com> <20110615075754.GA54879@icarus.home.lan>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jun 15, 2011 at 3:57 AM, Jeremy Chadwick
<freebsd@jdc.parodius.com>wrote:

> On Wed, Jun 15, 2011 at 03:14:43AM -0400, Joshua Boyd wrote:
> > I recently updated my server to the latest 8-STABLE, and upgraded to v28
> > ZFS. I have not had these problems on any other version of 8-STABLE or
> > 7-STABLE, which this box was upgraded from some time ago.
> >
> > Now, during my weekly scrub, I get the following messages and em0 is
> > unresponsive:
> >
> > Jun 12 03:07:58 foghornleghorn kernel: em0: Watchdog timeout -- resetting
> > Jun 12 03:07:58 foghornleghorn kernel: em0: link state changed to DOWN
> > Jun 12 03:08:01 foghornleghorn kernel: em0: link state changed to UP
> > Jun 12 03:08:47 foghornleghorn kernel: em0: Watchdog timeout -- resetting
> > Jun 12 03:08:47 foghornleghorn kernel: em0: link state changed to DOWN
> > Jun 12 03:08:50 foghornleghorn kernel: em0: link state changed to UP
> >
> > My scrub is scheduled to start at 03:00:00, so it looks like watchdog
> > timeouts start occurring pretty quickly once I/O ramps up.
> >
> > Here's some possibly relevant information, let me know if anything else
> > would be helpful to troubleshoot.
> >
> > FreeBSD foghornleghorn.res.openband.net 8.2-STABLE FreeBSD 8.2-STABLE
> #17:
> > Mon Jun  6 19:40:19 EDT 2011
> > root@foghornleghorn.res.openband.net:/usr/obj/usr/src/sys/FOGHORNLEGHORN
> >  amd64
> >
> > em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
> 0xe800-0xe83f
> > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on
> pci7
> >
> > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
> > hdr=0x00
> >     vendor     = 'Intel Corporation'
> >     device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
> >     class      = network
> >     subclass   = ethernet
> >
> > And, the SAS cards:
> >
> > dev.mpt.0.%desc: LSILogic SAS/SATA Adapter
> > dev.mpt.0.%driver: mpt
> > dev.mpt.0.%location: slot=0 function=0
> > dev.mpt.0.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9
> > subdevice=0xa580 class=0x010000
> > dev.mpt.0.%parent: pci1
> > dev.mpt.0.debug: 3
> > dev.mpt.0.role: 1
> > dev.mpt.1.%desc: LSILogic SAS/SATA Adapter
> > dev.mpt.1.%driver: mpt
> > dev.mpt.1.%location: slot=0 function=0
> > dev.mpt.1.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9
> > subdevice=0xa580 class=0x010000
> > dev.mpt.1.%parent: pci2
> > dev.mpt.1.debug: 3
> > dev.mpt.1.role: 1
> > dev.mpt.2.%desc: LSILogic SAS/SATA Adapter
> > dev.mpt.2.%driver: mpt
> > dev.mpt.2.%location: slot=0 function=0
> > dev.mpt.2.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x1000
> > subdevice=0x30a0 class=0x010000
> > dev.mpt.2.%parent: pci6
> > dev.mpt.2.debug: 3
> > dev.mpt.2.role: 1
>
> Please provide output from the following commands (as root):
>
> # pciconf -lvcb
>

hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 GFX Dual Slot'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (external gfx0 port A)'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (external gfx0 port B)'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (PCIe gpp port A)'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (PCIe gpp port C)'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (PCIe gpp port D)'
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (external gfx1 port A)'
    class      = bridge
    subclass   = PCI-PCI
atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 Serial ATA Controller'
    class      = mass storage
    subclass   = ATA
ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI0)'
    class      = serial bus
    subclass   = USB
ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI1)'
    class      = serial bus
    subclass   = USB
ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI2)'
    class      = serial bus
    subclass   = USB
ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI3)'
    class      = serial bus
    subclass   = USB
ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI4)'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (EHCI)'
    class      = serial bus
    subclass   = USB
none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 rev=0x14
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'ATI SMBus (ATI RD600/RS600)'
    class      = serial bus
    subclass   = SMBus
atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'ATI RD600/RS600 IDE Controller (RD600/RS600)'
    class      = mass storage
    subclass   = ATA
none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 PCI to LPC Bridge'
    class      = bridge
    subclass   = PCI-ISA
pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 PCI to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport
Technology Configuration'
    class      = bridge
    subclass   = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous
Control'
    class      = bridge
    subclass   = HOST-PCI
hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
    class      = bridge
    subclass   = HOST-PCI
mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
    class      = mass storage
    subclass   = SCSI
mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
    class      = mass storage
    subclass   = SCSI
atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab rev=0xb1
hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = '6121 SATA2 Controller'
    class      = mass storage
    subclass   = ATA
mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12
hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)'
    class      = network
    subclass   = ethernet
atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab rev=0xb2
hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = '6121 SATA2 Controller'
    class      = mass storage
    subclass   = ATA
mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08
hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
    class      = mass storage
    subclass   = SCSI
em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
    class      = network
    subclass   = ethernet
vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 rev=0x44
hdr=0x00
    vendor     = 'S3 Graphics Co., Ltd'
    device     = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
    class      = display
    subclass   = VGA
none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70
hdr=0x00
    vendor     = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
    device     = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)'
    class      = serial bus
    subclass   = FireWire
[josh@foghornleghorn /var/log]$ sudo su -
foghornleghorn#  pciconf -lvcb
hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 GFX Dual Slot'
    class      = bridge
    subclass   = HOST-PCI
    cap 08[c4] = HT slave
    cap 08[40] = HT retry mode
    cap 08[54] = HT unit ID clumping
    cap 08[9c] = HT unknown d03c
pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (external gfx0 port A)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
    cap 05[a0] = MSI supports 1 message
    cap 0d[b0] = PCI Bridge card=0x59561002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ecap 0002[110] = VC 1 max VC0
pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (external gfx0 port B)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
    cap 05[a0] = MSI supports 1 message
    cap 0d[b0] = PCI Bridge card=0x59561002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ecap 0002[110] = VC 1 max VC0
pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (PCIe gpp port A)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x2)
    cap 05[a0] = MSI supports 1 message
    cap 0d[b0] = PCI Bridge card=0x59561002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ecap 0002[110] = VC 1 max VC0
pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (PCIe gpp port C)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
    cap 05[a0] = MSI supports 1 message
    cap 0d[b0] = PCI Bridge card=0x59561002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ecap 0002[110] = VC 1 max VC0
pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (PCIe gpp port D)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
    cap 05[a0] = MSI supports 1 message
    cap 0d[b0] = PCI Bridge card=0x59561002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ecap 0002[110] = VC 1 max VC0
pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'RD790 PCI to PCI bridge (external gfx1 port A)'
    class      = bridge
    subclass   = PCI-PCI
    cap 01[50] = powerspec 3  supports D0 D3  current D0
    cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
    cap 05[a0] = MSI supports 1 message
    cap 0d[b0] = PCI Bridge card=0x59561002
    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ecap 0002[110] = VC 1 max VC0
atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 Serial ATA Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0x5000, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0x4000, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0x3000, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x2000, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0x1000, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xf71ff800, size 1024, enabled
    cap 01[60] = powerspec 2  supports D0 D3  current D0
ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI0)'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf71fe000, size 4096, enabled
ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI1)'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf71fd000, size 4096, enabled
ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI2)'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf71fc000, size 4096, enabled
ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI3)'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf71fb000, size 4096, enabled
ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (OHCI4)'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf71fa000, size 4096, enabled
ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 USB Controller (EHCI)'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xf71ff000, size 256, enabled
    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 05[d0] = MSI supports 1 message
    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 rev=0x14
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'ATI SMBus (ATI RD600/RS600)'
    class      = serial bus
    subclass   = SMBus
    bar   [10] = type I/O Port, range 32, base 0xb00, size 16, enabled
    cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000
atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'ATI RD600/RS600 IDE Controller (RD600/RS600)'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0x1f0, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0x3f4, size  1, enabled
    bar   [18] = type I/O Port, range 32, base 0x170, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x374, size  1, enabled
    bar   [20] = type I/O Port, range 32, base 0xff00, size 16, enabled
none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base 0xf71f4000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 rev=0x00
hdr=0x00
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 PCI to LPC Bridge'
    class      = bridge
    subclass   = PCI-ISA
pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00
hdr=0x01
    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
    device     = 'IXP SB600 PCI to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport
Technology Configuration'
    class      = bridge
    subclass   = HOST-PCI
    cap 08[80] = HT host
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous
Control'
    class      = bridge
    subclass   = HOST-PCI
    cap 0f[f0] = unknown
hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 rev=0x00
hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
    class      = bridge
    subclass   = HOST-PCI
mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
    class      = mass storage
    subclass   = SCSI
    bar   [10] = type I/O Port, range 32, base 0x6000, size 256, disabled
    bar   [14] = type Memory, range 64, base 0xf75fc000, size 16384, enabled
    bar   [1c] = type Memory, range 64, base 0xf75e0000, size 65536, enabled
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
    cap 05[98] = MSI supports 1 message, 64 bit
    cap 11[b0] = MSI-X supports 1 message in map 0x14
ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
    class      = mass storage
    subclass   = SCSI
    bar   [10] = type I/O Port, range 32, base 0x7000, size 256, disabled
    bar   [14] = type Memory, range 64, base 0xf78fc000, size 16384, enabled
    bar   [1c] = type Memory, range 64, base 0xf78e0000, size 65536, enabled
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
    cap 05[98] = MSI supports 1 message, 64 bit
    cap 11[b0] = MSI-X supports 1 message in map 0x14
ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab rev=0xb1
hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = '6121 SATA2 Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0x9800, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0x9400, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0x9000, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x8800, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0x8400, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xf79ffc00, size 1024, enabled
    cap 01[48] = powerspec 2  supports D0 D1 D3  current D0
    cap 05[50] = MSI supports 1 message
    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected
mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12
hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 64, base 0xf7afc000, size 16384, enabled
    bar   [18] = type I/O Port, range 32, base 0xa800, size 256, enabled
    cap 01[48] = powerspec 3  supports D0 D1 D2 D3  current D0
    cap 03[50] = VPD
    cap 05[5c] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab rev=0xb2
hdr=0x00
    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device     = '6121 SATA2 Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0xc800, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xc400, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xc000, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xb800, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xb400, size 16, enabled
    bar   [24] = type Memory, range 32, base 0xf7bffc00, size 1024, enabled
    cap 01[48] = powerspec 2  supports D0 D1 D3  current D0
    cap 05[50] = MSI supports 1 message
    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08
hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
    class      = mass storage
    subclass   = SCSI
    bar   [10] = type I/O Port, range 32, base 0xd000, size 256, disabled
    bar   [14] = type Memory, range 64, base 0xf7ffc000, size 16384, enabled
    bar   [1c] = type Memory, range 64, base 0xf7fe0000, size 65536, enabled
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
    cap 05[98] = MSI supports 1 message, 64 bit
    cap 11[b0] = MSI-X supports 1 message in map 0x14
ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 32, base 0xfebe0000, size 131072,
enabled
    bar   [14] = type Memory, range 32, base 0xfebc0000, size 131072,
enabled
    bar   [18] = type I/O Port, range 32, base 0xe800, size 64, enabled
    cap 01[dc] = powerspec 2  supports D0 D3  current D0
    cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction
vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 rev=0x44
hdr=0x00
    vendor     = 'S3 Graphics Co., Ltd'
    device     = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 32, base 0xf8000000, size 67108864,
enabled
none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70
hdr=0x00
    vendor     = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
    device     = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)'
    class      = serial bus
    subclass   = FireWire
    bar   [10] = type Memory, range 32, base 0xfeb8f000, size 4096, enabled
    cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0



> # vmstat -i
>

interrupt                          total       rate
irq9: acpi0                            1          0
irq16: atapci0+                        2          0
irq17: ohci1 ohci3                     3          0
irq18: mpt0 ohci2+               7066718         31
irq19: mpt1 atapci*              7798877         34
irq20: em0                      11715792         51
irq22: atapci4                    628883          2
cpu0: timer                    455853831       1999
irq256: mskc0                   97098730        425
cpu1: timer                    455845190       1999
Total                         1036008027       4544



> # sysctl -a | grep msi
>

hw.pci.honor_msi_blacklist: 1
hw.pci.enable_msix: 1
hw.pci.enable_msi: 1



> # dmesg
>

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #17: Mon Jun  6 19:40:19 EDT 2011
    root@foghornleghorn.res.openband.net:/usr/obj/usr/src/sys/FOGHORNLEGHORN
amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) II X2 555 Processor (3209.77-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f43  Family = 10  Model = 4  Stepping =
3

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD
Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD
Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8257736704 (7875 MB)
ACPI APIC Table: <092310 OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
acpi0: <092310 OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fff00000, 100000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mpt0: <LSILogic SAS/SATA Adapter> port 0x6000-0x60ff mem
0xf75fc000-0xf75fffff,0xf75e0000-0xf75effff irq 18 at device 0.0 on pci1
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.20.0
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mpt1: <LSILogic SAS/SATA Adapter> port 0x7000-0x70ff mem
0xf78fc000-0xf78fffff,0xf78e0000-0xf78effff irq 19 at device 0.0 on pci2
mpt1: [ITHREAD]
mpt1: MPI Version=1.5.20.0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell 88SX6121 UDMA133 controller> port
0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f mem
0xf79ffc00-0xf79fffff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci1: <AHCI SATA controller> on atapci0
atapci1: [ITHREAD]
atapci1: AHCI v1.00 controller with 3 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 0> on atapci0
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa800-0xa8ff mem
0xf7afc000-0xf7afffff irq 18 at device 0.0 on pci4
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on
mskc0
msk0: Ethernet address: 00:1f:c6:e9:f8:7c
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
mskc0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib5
atapci2: <Marvell 88SX6121 UDMA133 controller> port
0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f mem
0xf7bffc00-0xf7bfffff irq 19 at device 0.0 on pci5
atapci2: [ITHREAD]
atapci3: <AHCI SATA controller> on atapci2
atapci3: [ITHREAD]
atapci3: AHCI v1.00 controller with 3 3Gbps ports, PM supported
ata5: <ATA channel 0> on atapci3
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 0> on atapci2
ata7: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 11.0 on pci0
pci6: <ACPI PCI bus> on pcib6
mpt2: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem
0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 19 at device 0.0 on pci6
mpt2: [ITHREAD]
mpt2: MPI Version=1.5.19.0
atapci4: <ATI IXP600 SATA300 controller> port
0x5000-0x5007,0x4000-0x4003,0x3000-0x3007,0x2000-0x2003,0x1000-0x100f mem
0xf71ff800-0xf71ffbff irq 22 at device 18.0 on pci0
atapci4: [ITHREAD]
atapci4: AHCI v1.10 controller with 4 3Gbps ports, PM supported
ata8: <ATA channel 0> on atapci4
ata8: port is not ready (timeout 0ms) tfd = 000001d0
ata8: software reset clear timeout
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
ata10: <ATA channel 2> on atapci4
ata10: [ITHREAD]
ata11: <ATA channel 3> on atapci4
ata11: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xf71fe000-0xf71fefff irq 16 at
device 19.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xf71fd000-0xf71fdfff irq 17 at
device 19.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xf71fc000-0xf71fcfff irq 18 at
device 19.2 on pci0
ohci2: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xf71fb000-0xf71fbfff irq 17 at
device 19.3 on pci0
ohci3: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xf71fa000-0xf71fafff irq 18 at
device 19.4 on pci0
ohci4: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf71ff000-0xf71ff0ff irq 19
at device 19.5 on pci0
ehci0: [ITHREAD]
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci5: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci5
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci7: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0xe800-0xe83f
mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on pci7
em0: [FILTER]
em0: Ethernet address: 00:1b:21:4e:e5:2e
vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff at device 6.0 on
pci7
pci7: <serial bus, FireWire> at device 8.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
device_attach: acpi_hpet1 attach returned 12
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
device_attach: acpi_throttle0 attach returned 6
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ad16: 476940MB <Seagate ST3500641NS 3.AEP> at ata8-master UDMA100 SATA 3Gb/s
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
da8 at mpt0 bus 0 scbus0 target 0 lun 0
da8: <ATA ST31000528AS CC38> Fixed Direct Access SCSI-5 device
da8: 300.000MB/s transfers
da8: Command Queueing enabled
da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da9 at mpt0 bus 0 scbus0 target 1 lun 0
da9: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device
da9: 300.000MB/s transfers
da9: Command Queueing enabled
da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da10 at mpt0 bus 0 scbus0 target 2 lun 0
da10: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device
da10: 300.000MB/s transfers
da10: Command Queueing enabled
da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da11 at mpt0 bus 0 scbus0 target 3 lun 0
da11: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device
da11: 300.000MB/s transfers
da11: Command Queueing enabled
da11: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da12 at mpt0 bus 0 scbus0 target 4 lun 0
da12: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
da12: 300.000MB/s transfers
da12: Command Queueing enabled
da12: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da13 at mpt0 bus 0 scbus0 target 5 lun 0
da13: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
da13: 300.000MB/s transfers
da13: Command Queueing enabled
da13: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da14 at mpt0 bus 0 scbus0 target 6 lun 0
da14: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device
da14: 300.000MB/s transfers
da14: Command Queueing enabled
da14: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da0 at mpt1 bus 0 scbus1 target 0 lun 0
da0: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1 at mpt1 bus 0 scbus1 target 1 lun 0
da1: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mpt1 bus 0 scbus1 target 2 lun 0
da2: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mpt1 bus 0 scbus1 target 3 lun 0
da3: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da4 at mpt1 bus 0 scbus1 target 4 lun 0
da4: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mpt1 bus 0 scbus1 target 5 lun 0
da5: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da6 at mpt1 bus 0 scbus1 target 6 lun 0
da6: <ATA ST31000340AS SD04> Fixed Direct Access SCSI-5 device
da6: 300.000MB/s transfers
da6: Command Queueing enabled
da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da7 at mpt1 bus 0 scbus1 target 7 lun 0
da7: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
SMP: AP CPU #1 Launched!
uhub5: 10 ports with 10 removable, self powered
GEOM: da7: geometry does not match label (16h,63s != 255h,63s).
Trying to mount root from ufs:/dev/ad16s1a
WARNING: / was not properly dismounted
ZFS filesystem version 5
ZFS storage pool version 28
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
0
mpt1: request 0xffffff80002c57f0:2369 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c57f0:2369 function 0
mpt1: mpt_wait_req(1) timed out
mpt1: mpt_recover_commands: abort timed-out. Resetting controller
mpt1: mpt_cam_event: 0x80
mpt1: mpt_cam_event: 0x80
mpt1: completing timedout/aborted req 0xffffff80002c57f0:2369
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x12
mpt1: mpt_cam_event: 0x16
mpt1: request 0xffffff80002c5c70:2375 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c5c70:2375 function 0
mpt1: completing timedout/aborted req 0xffffff80002c5c70:2375
mpt1:
abort of req 0xffffff80002c5c70:0 completed
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x16
mpt1: request 0xffffff80002c5fd0:2379 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c5fd0:2379 function 0
mpt1: completing timedout/aborted req 0xffffff80002c5fd0:2379
mpt1:
abort of req 0xffffff80002c5fd0:0 completed
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x16
mpt1: request 0xffffff80002c6210:2383 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c6210:2383 function 0
mpt1: completing timedout/aborted req 0xffffff80002c6210:2383
mpt1:
abort of req 0xffffff80002c6210:0 completed
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x16
mpt1: request 0xffffff80002c6180:2387 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c6180:2387 function 0
mpt1: completing timedout/aborted req 0xffffff80002c6180:2387
mpt1:
abort of req 0xffffff80002c6180:0 completed
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x16
mpt1: request 0xffffff80002c62a0:2391 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c62a0:2391 function 0
mpt1: completing timedout/aborted req 0xffffff80002c62a0:2391
mpt1:
abort of req 0xffffff80002c62a0:0 completed
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x16
mpt1: request 0xffffff80002c6720:2395 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c6720:2395 function 0
mpt1: completing timedout/aborted req 0xffffff80002c6720:2395
mpt1:
abort of req 0xffffff80002c6720:0 completed
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x16
mpt1: request 0xffffff80002c67b0:2399 timed out for ccb 0xffffff00063bb000
(req->ccb 0xffffff00063bb000)
mpt1: attempting to abort req 0xffffff80002c67b0:2399 function 0
mpt1: completing timedout/aborted req 0xffffff80002c67b0:2399
mpt1:
abort of req 0xffffff80002c67b0:0 completed
mpt1: mpt_cam_event: 0x16
mpt1: mpt_cam_event: 0x16
mpt0: request 0xffffff80002a69e0:2082 timed out for ccb 0xffffff0006389800
(req->ccb 0xffffff0006389800)
mpt0: attempting to abort req 0xffffff80002a69e0:2082 function 0
mpt0: completing timedout/aborted req 0xffffff80002a69e0:2082
mpt0: abort of req 0xffffff80002a69e0:0 completed
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x16
mpt0: request 0xffffff80002a6c20:2086 timed out for ccb 0xffffff0006389800
(req->ccb 0xffffff0006389800)
mpt0: attempting to abort req 0xffffff80002a6c20:2086 function 0
mpt0: completing timedout/aborted req 0xffffff80002a6c20:2086
mpt0: abort of req 0xffffff80002a6c20:0 completed
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x16
mpt0: request 0xffffff80002a6cb0:2090 timed out for ccb 0xffffff0006389800
(req->ccb 0xffffff0006389800)
mpt0: attempting to abort req 0xffffff80002a6cb0:2090 function 0
mpt0: completing timedout/aborted req 0xffffff80002a6cb0:2090
mpt0: abort of req 0xffffff80002a6cb0:0 completed
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x16
mpt0: request 0xffffff80002a6b90:2094 timed out for ccb 0xffffff0006389800
(req->ccb 0xffffff0006389800)
mpt0: attempting to abort req 0xffffff80002a6b90:2094 function 0
mpt0: completing timedout/aborted req 0xffffff80002a6b90:2094
mpt0: abort of req 0xffffff80002a6b90:0 completed
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x16
tun0: link state changed to UP
(da8:mpt0:0:0:0): READ(10). CDB: 28 0 3e e2 6f 56 0 0 1 0
(da8:mpt0:0:0:0): CAM status: SCSI Status Error
(da8:mpt0:0:0:0): SCSI status: Check Condition
(da8:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da11:mpt0:0:3:0): READ(10). CDB: 28 0 1a b6 92 0 0 0 80 0
(da11:mpt0:0:3:0): CAM status: SCSI Status Error
(da11:mpt0:0:3:0): SCSI status: Check Condition
(da11:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da2:mpt1:0:2:0): READ(10). CDB: 28 0 76 7b de 0 0 0 80 0
(da2:mpt1:0:2:0): CAM status: SCSI Status Error
(da2:mpt1:0:2:0): SCSI status: Check Condition
(da2:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da10:mpt0:0:2:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0
(da10:mpt0:0:2:0): CAM status: SCSI Status Error
(da10:mpt0:0:2:0): SCSI status: Check Condition
(da10:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da5:mpt1:0:5:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0
(da5:mpt1:0:5:0): CAM status: SCSI Status Error
(da5:mpt1:0:5:0): SCSI status: Check Condition
(da5:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da7:mpt1:0:7:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0
(da7:mpt1:0:7:0): CAM status: SCSI Status Error
(da7:mpt1:0:7:0): SCSI status: Check Condition
(da7:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da6:mpt1:0:6:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0
(da6:mpt1:0:6:0): CAM status: SCSI Status Error
(da6:mpt1:0:6:0): SCSI status: Check Condition
(da6:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da0:mpt1:0:0:0): READ(10). CDB: 28 0 76 91 87 e3 0 0 1 0
(da0:mpt1:0:0:0): CAM status: SCSI Status Error
(da0:mpt1:0:0:0): SCSI status: Check Condition
(da0:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da3:mpt1:0:3:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0
(da3:mpt1:0:3:0): CAM status: SCSI Status Error
(da3:mpt1:0:3:0): SCSI status: Check Condition
(da3:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da1:mpt1:0:1:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0
(da1:mpt1:0:1:0): CAM status: SCSI Status Error
(da1:mpt1:0:1:0): SCSI status: Check Condition
(da1:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da9:mpt0:0:1:0): READ(10). CDB: 28 0 1a b3 d7 0 0 0 80 0
(da9:mpt0:0:1:0): CAM status: SCSI Status Error
(da9:mpt0:0:1:0): SCSI status: Check Condition
(da9:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
(da4:mpt1:0:4:0): READ(10). CDB: 28 0 53 3c c6 0 0 0 80 0
(da4:mpt1:0:4:0): CAM status: SCSI Status Error
(da4:mpt1:0:4:0): SCSI status: Check Condition
(da4:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)



>
> --
> | Jeremy Chadwick                                   jdc@parodius.com |
> | Parodius Networking                       http://www.parodius.com/ |
> | UNIX Systems Administrator                   Mountain View, CA, US |
> | Making life hard for others since 1977.               PGP 4BD6C0CB |
>
>


-- 
Joshua Boyd
JBipNet

E-mail: boydjd@jbip.net

http://www.jbip.net



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTim_Y30cXNtvOGg_%2Bj4devU5VtiMxA>