Date: Tue, 9 Aug 2011 05:04:59 -0500 From: Zhihao Yuan <lichray@gmail.com> To: David Demelier <demelier.david@gmail.com> Cc: freebsd-multimedia@freebsd.org Subject: Re: Again, snd_hda headphones problem Message-ID: <CAGsORuCUkXK_5LnZ6ffD_%2Ba96rK0Pj2VLugi1%2BUeq9sHBUSTAw@mail.gmail.com> In-Reply-To: <4E3C2ACE.7090708@gmail.com> References: <CAGsORuCYLpmgu=CNpTp3vUxfLt=__dkMX0JA_iAcxSOdrPkxXg@mail.gmail.com> <4E3C2ACE.7090708@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Here is my full dmesg when boot with -v. On Fri, Aug 5, 2011 at 12:39 PM, David Demelier <demelier.david@gmail.com> wrote: > On 03/08/2011 20:43, Zhihao Yuan wrote: >> >> Hi, >> >> I posted this message on FreeBSD forum, but got no response. So I'm >> seeking some help here. >> >> I bought a laptop, HP Elitebook 8540w. >> >> ~> uname -a >> FreeBSD compaq.yuetime 8.2-STABLE FreeBSD 8.2-STABLE #4 r224501: Fri >> Jul 29 22:28:38 CDT 2011 >> >> lichray@compaq.yuetime:/usr/obj/home/lichray/devel/freebsd-stable/sys/HOUKAGO >> amd64 >> >> >> I have already set up the default_unit: >> >> ~> cat /dev/sndstat >> FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64) >> Installed devices: >> pcm0:<HDA NVidia GT220 HDMI PCM #0 DisplayPort> (play) >> pcm1:<HDA NVidia GT220 HDMI PCM #0 DisplayPort> (play) >> pcm2:<HDA NVidia GT220 HDMI PCM #0 DisplayPort> (play) >> pcm3:<HDA NVidia GT220 HDMI PCM #0 DisplayPort> (play) >> pcm4:<HDA IDT 92HD75BX PCM #0 Analog> (play/rec) default >> pcm5:<HDA IDT 92HD75BX PCM #1 Analog> (play) >> >> >> pindump: >> >> hdac1: Dumping AFG cad=0 nid=1 pins: >> hdac1: nid 10 0x2121101f as 1 seq 15 Headphones Jack jack 1 loc >> 33 color Black misc 0 >> hdac1: Caps: OUT HP Sense: 0x00000000 >> hdac1: nid 11 0x03a1102e as 2 seq 14 Mic Jack jack 1 loc >> 3 color Black misc 0 >> hdac1: Caps: IN VREF Sense: 0x00000000 >> hdac1: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc >> 16 color Unknown misc 1 >> hdac1: Caps: IN VREF Sense: 0x00000000 >> hdac1: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc >> 16 color Unknown misc 1 >> hdac1: Caps: OUT Sense: 0x00000000 >> hdac1: nid 14 0x21811040 as 4 seq 0 Line-in Jack jack 1 loc >> 33 color Black misc 0 [DISABLED] >> hdac1: Caps: IN VREF Sense: 0x00000000 >> hdac1: nid 15 0x03211030 as 3 seq 0 Headphones Jack jack 1 loc >> 3 color Black misc 0 >> hdac1: Caps: OUT Sense: 0x00000000 >> hdac1: nid 20 0x40f000f0 as 15 seq 0 Other None jack 0 loc >> 0 color Unknown misc 0 [DISABLED] >> hdac1: Caps: IN OUT >> hdac1: nid 24 0x40f000f0 as 15 seq 0 Other None jack 0 loc >> 0 color Unknown misc 0 [DISABLED] >> hdac1: Caps: IN >> hdac1: nid 25 0x40f000f0 as 15 seq 0 Other None jack 0 loc >> 0 color Unknown misc 0 [DISABLED] >> hdac1: Caps: IN >> hdac1: nid 30 0x40f000f0 as 15 seq 0 Other None jack 0 loc >> 0 color Unknown misc 0 [DISABLED] >> hdac1: Caps: OUT >> hdac1: nid 31 0x40f000f0 as 15 seq 0 Other None jack 0 loc >> 0 color Unknown misc 0 [DISABLED] >> hdac1: Caps: OUT EAPD >> hdac1: nid 32 0x40f000f0 as 15 seq 0 Other None jack 0 loc >> 0 color Unknown misc 0 [DISABLED] >> hdac1: Caps: OUT >> hdac1: NumGPIO=8 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 >> hdac1: GPIO: data=0x00000000 enable=0x00000000 direction=0x00000000 >> hdac1: wake=0x00000000 unsol=0x00000000 sticky=0x00000000 >> >> >> And the sound comes from the internal speaker, and the internal record >> works. But the sound does not work on the headphones. >> >> I read many posts and the snd_hda(4), and I know I need to bind the >> headphones and the internal speaker to the same as, and I need to do >> the same on output. But I don't know which device is which, and I just >> don't know how to deal with the seq. Please help me if you are pro on >> this. >> > > Please paste somewhere a *full* verbose boot (boot -v) > > -- > David Demelier > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to > "freebsd-multimedia-unsubscribe@freebsd.org" > -- Zhihao Yuan, nickname lichray The best way to predict the future is to invent it. ___________________________________________________ 4BSD -- http://4bsd.biz/ [-- Attachment #2 --] pcib1: requested memory range 0xd0000000-0xd1ffffff: good map[24]: type I/O Port, range 32, base 0x5000, size 7, enabled pcib1: requested I/O range 0x5000-0x507f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x10de, dev=0x0be2, revid=0xa1 domain=0, bus=1, slot=0, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd3000000, size 14, enabled pcib1: requested memory range 0xd3000000-0xd3003fff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 nvidia0: <Quadro FX 880M> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xd2000000 vgapci0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xc0000000 vgapci0: Reserved 0x2000000 bytes for rid 0x1c type 3 at 0xd0000000 vgapci0: child nvidia0 requested pci_enable_io ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 nvidia0: [MPSAFE] nvidia0: [ITHREAD] hdac0: <NVidia (Unknown) High Definition Audio Controller> mem 0xd3000000-0xd3003fff irq 16 at device 0.1 on pci1 hdac0: HDA Driver Revision: 20100226_0142 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd3000000 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 50 hdac0: using IRQ 256 for MSI hdac0: [MPSAFE] hdac0: [ITHREAD] hdac0: Caps: OSS 2, ISS 4, BSS 0, NSDO 2, 64bit, CORB 256, RIRB 256 pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x6020-0x603f mem 0xd7500000-0xd751ffff,0xd752a000-0xd752afff irq 20 at device 25.0 on pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd7500000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 51 em0: using IRQ 257 for MSI em0: Using an MSI interrupt em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xd752a000 em0: [FILTER] em0: bpf attached em0: Ethernet address: 88:ae:1d:aa:7f:77 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xd7529000-0xd75293ff irq 16 at device 26.0 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus0: EHCI version 1.0 usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 usbus0: bpf attached ehci0: usbpf: Attached hdac1: <Intel 5 Series/3400 Series High Definition Audio Controller> mem 0xd7520000-0xd7523fff irq 16 at device 27.0 on pci0 hdac1: HDA Driver Revision: 20100226_0142 hdac1: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd7520000 hdac1: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 258 to local APIC 0 vector 52 hdac1: using IRQ 258 for MSI hdac1: [MPSAFE] hdac1: [ITHREAD] hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: memory decode 0xd7400000-0xd74fffff pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 67 pcib3: I/O decode 0x3000-0x4fff pcib3: memory decode 0xd3400000-0xd73fffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib4: domain 0 pcib4: secondary bus 68 pcib4: subordinate bus 68 pcib4: memory decode 0xd3300000-0xd33fffff pcib4: no prefetched decode pci68: <ACPI PCI bus> on pcib4 pci68: domain=0, physical bus=68 found-> vendor=0x8086, dev=0x4238, revid=0x35 domain=0, bus=68, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd3300000, size 13, enabled pcib4: requested memory range 0xd3300000-0xd3301fff: good pcib4: matched entry for 68.0.INTA pcib4: slot 0 INTA hardwired to IRQ 19 iwn0: <Intel(R) Centrino(R) Ultimate-N 6300> mem 0xd3300000-0xd3301fff irq 19 at device 0.0 on pci68 iwn0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xd3300000 iwn0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 259 to local APIC 0 vector 53 iwn0: using IRQ 259 for MSI iwn0: MIMO 0T0R, , address 00:b0:57:03:2c:00 iwn0: [MPSAFE] iwn0: [ITHREAD] iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pcib5: domain 0 pcib5: secondary bus 69 pcib5: subordinate bus 69 pcib5: memory decode 0xd3200000-0xd32fffff pcib5: no prefetched decode pci69: <ACPI PCI bus> on pcib5 pci69: domain=0, physical bus=69 found-> vendor=0x1033, dev=0x0194, revid=0x03 domain=0, bus=69, slot=0, func=0 class=0c-03-30, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 8 messages, 64 bit MSI-X supports 8 messages in map 0x10 map[10]: type Memory, range 64, base 0xd3200000, size 13, enabled pcib5: requested memory range 0xd3200000-0xd3201fff: good pcib5: matched entry for 69.0.INTA pcib5: slot 0 INTA hardwired to IRQ 19 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd3200000-0xd3201fff irq 19 at device 0.0 on pci69 xhci0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xd3200000 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 xhci0: [MPSAFE] xhci0: [ITHREAD] xhci0: 32 byte context size. usbus1 on xhci0 usbus1: bpf attached xhci0: usbpf: Attached ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xd7528000-0xd75283ff irq 20 at device 29.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 55 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <Intel PCH USB 2.0 controller USB-A> on ehci1 usbus2: bpf attached ehci1: usbpf: Attached pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 70 pcib6: subordinate bus 71 pcib6: I/O decode 0x2000-0x2fff pcib6: memory decode 0xd3100000-0xd31fffff pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci70: <ACPI PCI bus> on pcib6 pci70: domain=0, physical bus=70 found-> vendor=0x1180, dev=0x0832, revid=0x06 domain=0, bus=70, slot=6, func=0 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd3101000, size 11, enabled pcib6: requested memory range 0xd3101000-0xd31017ff: good pcib6: matched entry for 70.6.INTA pcib6: slot 6 INTA hardwired to IRQ 20 found-> vendor=0x1180, dev=0x0822, revid=0x25 domain=0, bus=70, slot=6, func=1 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd3105000, size 8, enabled pcib6: requested memory range 0xd3105000-0xd31050ff: good pcib6: matched entry for 70.6.INTB pcib6: slot 6 INTB hardwired to IRQ 22 found-> vendor=0x1180, dev=0x0843, revid=0x14 domain=0, bus=70, slot=6, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd3104000, size 8, enabled pcib6: requested memory range 0xd3104000-0xd31040ff: good pcib6: matched entry for 70.6.INTB pcib6: slot 6 INTB hardwired to IRQ 22 found-> vendor=0x1180, dev=0x0592, revid=0x14 domain=0, bus=70, slot=6, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd3103000, size 8, enabled pcib6: requested memory range 0xd3103000-0xd31030ff: good pcib6: matched entry for 70.6.INTB pcib6: slot 6 INTB hardwired to IRQ 22 found-> vendor=0x1180, dev=0x0852, revid=0x14 domain=0, bus=70, slot=6, func=4 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd3102000, size 8, enabled pcib6: requested memory range 0xd3102000-0xd31020ff: good pcib6: matched entry for 70.6.INTB pcib6: slot 6 INTB hardwired to IRQ 22 found-> vendor=0x1180, dev=0x0476, revid=0xbb domain=0, bus=70, slot=6, func=5 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd3100000, size 12, enabled pcib6: requested memory range 0xd3100000-0xd3100fff: good pcib6: matched entry for 70.6.INTB pcib6: slot 6 INTB hardwired to IRQ 22 fwohci0: vendor=1180, dev=832 fwohci0: vendor=1180, dev=832 fwohci0: <1394 Open Host Controller Interface> mem 0xd3101000-0xd31017ff irq 20 at device 6.0 on pci70 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd3101000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 55:66:77:88:11:22:33:44 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode pci70: <base peripheral, SD host controller> at device 6.1 (no driver attached) pci70: <base peripheral> at device 6.2 (no driver attached) pci70: <base peripheral> at device 6.3 (no driver attached) pci70: <base peripheral> at device 6.4 (no driver attached) cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd3100000-0xd3100fff irq 22 at device 6.5 on pci70 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd3100000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 56 cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100007 0x060700bb 0x00822000 0x10: 0xd3100000 0x020000dc 0x20474746 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x04000216 0x40: 0x1521103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x30000001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x80600008 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x1521103c 0x00000000 0xc0: 0x00003000 0x30000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000040 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0x6048-0x604f,0x6054-0x6057,0x6040-0x6047,0x6050-0x6053,0x6000-0x601f mem 0xd7527000-0xd75277ff irq 21 at device 31.2 on pci0 ahci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xd7527000 ahci0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 260 to local APIC 0 vector 57 ahci0: using IRQ 260 for MSI ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd EM eSATA 6ports ahci0: Caps2: APST ahci0: EM Caps: ALHD XMT SMB LED ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [MPSAFE] ahcich0: [ITHREAD] ahcich0: Caps: ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [MPSAFE] ahcich1: [ITHREAD] ahcich1: Caps: ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: [MPSAFE] ahcich2: [ITHREAD] ahcich2: Caps: HPCP ESP ahcich3: <AHCI channel> at channel 4 on ahci0 ahcich3: [MPSAFE] ahcich3: [ITHREAD] ahcich3: Caps: HPCP ESP ahcich4: <AHCI channel> at channel 5 on ahci0 ahcich4: [MPSAFE] ahcich4: [ITHREAD] ahcich4: Caps: HPCP ESP pci0: <dasp> at device 31.6 (no driver attached) pcib7: <ACPI Host-PCI bridge> on acpi0 pcib7: could not get PCI interrupt routing table for \\_SB_.CPBG - AE_NOT_FOUND pci255: <ACPI PCI bus> on pcib7 pci255: domain=0, physical bus=255 found-> vendor=0x8086, dev=0x2c62, revid=0x02 domain=0, bus=255, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d01, revid=0x02 domain=0, bus=255, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d10, revid=0x02 domain=0, bus=255, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d11, revid=0x02 domain=0, bus=255, slot=2, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d12, revid=0x02 domain=0, bus=255, slot=2, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2d13, revid=0x02 domain=0, bus=255, slot=2, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0 acpi_hp0: HP event GUID detected, installing event handler acpi_hp0: HP CMI GUID detected acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_hp1: <HP ACPI-WMI Mapping> on acpi_wmi1 acpi_hp1: WMI device does not provide the HP BIOS GUID device_attach: acpi_hp1 attach returned 22 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 acpi_tz3: <Thermal Zone> on acpi0 acpi_tz4: <Thermal Zone> on acpi0 acpi_tz5: <Thermal Zone> on acpi0 acpi_tz6: <Thermal Zone> on acpi0 acpi_tz7: <Thermal Zone> on acpi0 acpi_tz8: <Thermal Zone> on acpi0 acpi_tz9: <Thermal Zone> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 8 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_hp2: <HP ACPI-WMI Mapping> on acpi_wmi2 acpi_hp2: WMI device does not provide the HP BIOS GUID device_attach: acpi_hp2 attach returned 22 acpi0: wakeup code va 0xffffff8238a21000 pa 0x4000 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices coretemp0: <CPU On-Die Thermal Sensors> on cpu0 coretemp0: Tj(target) value 105 does not seem right. coretemp0: Setting TjMax=100 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 coretemp1: Tj(target) value 105 does not seem right. coretemp1: Setting TjMax=100 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 coretemp2: Tj(target) value 105 does not seem right. coretemp2: Setting TjMax=100 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 coretemp3: Tj(target) value 105 does not seem right. coretemp3: Setting TjMax=100 est3: <Enhanced SpeedStep Frequency Control> on cpu3 Device configuration finished. procfs registered ZFS filesystem version 5 ZFS storage pool version 28 RTC BIOS diagnostic error 80<clock_battery> lapic: Divisor 2, Frequency 66500421 Hz Timecounter "TSC" frequency 2394015159 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining Linux ELF exec handler installed ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 disabled ipfw0: bpf attached lo0: bpf attached hdac0: Probing codec #0... hdac0: HDA Codec #0: NVidia GT220 HDMI hdac0: HDA Codec ID: 0x10de000a hdac0: Vendor: 0x10de hdac0: Device: 0x000a hdac0: Revision: 0x01 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x1521103c hdac0: Found audio FG nid=1 startnode=4 endnode=6 total=2 hdac0: Probing codec #1... hdac0: HDA Codec #1: NVidia GT220 HDMI hdac0: HDA Codec ID: 0x10de000a hdac0: Vendor: 0x10de hdac0: Device: 0x000a hdac0: Revision: 0x01 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x1521103c hdac0: Found audio FG nid=1 startnode=4 endnode=6 total=2 hdac0: Probing codec #2... hdac0: HDA Codec #2: NVidia GT220 HDMI hdac0: HDA Codec ID: 0x10de000a hdac0: Vendor: 0x10de hdac0: Device: 0x000a hdac0: Revision: 0x01 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x1521103c hdac0: Found audio FG nid=1 startnode=4 endnode=6 total=2 hdac0: Probing codec #3... hdac0: HDA Codec #3: NVidia GT220 HDMI hdac0: HDA Codec ID: 0x10de000a hdac0: Vendor: 0x10de hdac0: Device: 0x000a hdac0: Revision: 0x01 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x1521103c hdac0: Found audio FG nid=1 startnode=4 endnode=6 total=2 hdac0: hdac0: Processing audio FG cad=0 nid=1... hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: Patched pins configuration: hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: 1 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=5 seq=0 hdac0: Tracing association 0 (1) hdac0: Pin 5 traced to DAC 4 hdac0: Association 0 (1) trace succeeded hdac0: Tracing input monitor hdac0: Tracing other input monitors hdac0: Tracing beeper hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x00000000 hdac0: hdac0: nid: 4 hdac0: Name: audio output hdac0: Widget cap: 0x000072b1 hdac0: DIGITAL UNSOL STRIPE 8CH hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e07f0 hdac0: 16 20 24 bits, 32 44 48 88 96 176 192 KHz hdac0: hdac0: nid: 5 hdac0: Name: pin: Digital-out (Jack) hdac0: Widget cap: 0x00407381 hdac0: DIGITAL UNSOL 8CH hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x09000094 hdac0: PDC OUT HDMI DP HBR hdac0: Pin config: 0x18560010 hdac0: Pin control: 0x00000040 OUT hdac0: connections: 1 hdac0: | hdac0: + <- nid=4 [audio output] hdac0: hdac0: Processing audio FG cad=1 nid=1... hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: Patched pins configuration: hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: 1 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=5 seq=0 hdac0: Tracing association 0 (1) hdac0: Pin 5 traced to DAC 4 hdac0: Association 0 (1) trace succeeded hdac0: Tracing input monitor hdac0: Tracing other input monitors hdac0: Tracing beeper hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x00000000 hdac0: hdac0: nid: 4 hdac0: Name: audio output hdac0: Widget cap: 0x000072b1 hdac0: DIGITAL UNSOL STRIPE 8CH hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e07f0 hdac0: 16 20 24 bits, 32 44 48 88 96 176 192 KHz hdac0: hdac0: nid: 5 hdac0: Name: pin: Digital-out (Jack) hdac0: Widget cap: 0x00407381 hdac0: DIGITAL UNSOL 8CH hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x09000094 hdac0: PDC OUT HDMI DP HBR hdac0: Pin config: 0x18560010 hdac0: Pin control: 0x00000040 OUT hdac0: connections: 1 hdac0: | hdac0: + <- nid=4 [audio output] hdac0: hdac0: Processing audio FG cad=2 nid=1... hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: Patched pins configuration: hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: 1 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=5 seq=0 hdac0: Tracing association 0 (1) hdac0: Pin 5 traced to DAC 4 hdac0: Association 0 (1) trace succeeded hdac0: Tracing input monitor hdac0: Tracing other input monitors hdac0: Tracing beeper hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x00000000 hdac0: hdac0: nid: 4 hdac0: Name: audio output hdac0: Widget cap: 0x000072b1 hdac0: DIGITAL UNSOL STRIPE 8CH hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e07f0 hdac0: 16 20 24 bits, 32 44 48 88 96 176 192 KHz hdac0: hdac0: nid: 5 hdac0: Name: pin: Digital-out (Jack) hdac0: Widget cap: 0x00407381 hdac0: DIGITAL UNSOL 8CH hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x09000094 hdac0: PDC OUT HDMI DP HBR hdac0: Pin config: 0x18560010 hdac0: Pin control: 0x00000040 OUT hdac0: connections: 1 hdac0: | hdac0: + <- nid=4 [audio output] hdac0: hdac0: Processing audio FG cad=3 nid=1... hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: Patched pins configuration: hdac0: nid 5 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0 hdac0: 1 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=5 seq=0 hdac0: Tracing association 0 (1) hdac0: Pin 5 traced to DAC 4 hdac0: Association 0 (1) trace succeeded hdac0: Tracing input monitor hdac0: Tracing other input monitors hdac0: Tracing beeper hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x00000000 hdac0: hdac0: nid: 4 hdac0: Name: audio output hdac0: Widget cap: 0x000072b1 hdac0: DIGITAL UNSOL STRIPE 8CH hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e07f0 hdac0: 16 20 24 bits, 32 44 48 88 96 176 192 KHz hdac0: hdac0: nid: 5 hdac0: Name: pin: Digital-out (Jack) hdac0: Widget cap: 0x00407381 hdac0: DIGITAL UNSOL 8CH hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x09000094 hdac0: PDC OUT HDMI DP HBR hdac0: Pin config: 0x18560010 hdac0: Pin control: 0x00000040 OUT hdac0: connections: 1 hdac0: | hdac0: + <- nid=4 [audio output] hdac0: pcm0: <HDA NVidia GT220 HDMI PCM #0 DisplayPort> at cad 0 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000005 pcm0: AC3 PCM pcm0: PCM cap: 0x000e07f0 pcm0: 16 20 24 bits, 32 44 48 88 96 176 192 KHz pcm0: DAC: 4 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=5 [pin: Digital-out (Jack)] pcm0: | pcm0: + <- nid=4 [audio output] [src: pcm] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Forcing Soft PCM volume pcm0: Forcing master volume with PCM pcm0: Mixer "vol" -> "none": child=0x00000010 pcm0: Mixer "pcm": parent="vol" pcm0: Soft PCM mixer ENABLED pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 7b70000, 4000; 0xffffff8238a4d000 -> 7b70000 pcm1: <HDA NVidia GT220 HDMI PCM #0 DisplayPort> at cad 1 nid 1 on hdac0 pcm1: +--------------------------------------+ pcm1: | DUMPING PCM Playback/Record Channels | pcm1: +--------------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: Stream cap: 0x00000005 pcm1: AC3 PCM pcm1: PCM cap: 0x000e07f0 pcm1: 16 20 24 bits, 32 44 48 88 96 176 192 KHz pcm1: DAC: 4 pcm1: pcm1: +-------------------------------+ pcm1: | DUMPING Playback/Record Paths | pcm1: +-------------------------------+ pcm1: pcm1: Playback: pcm1: pcm1: nid=5 [pin: Digital-out (Jack)] pcm1: | pcm1: + <- nid=4 [audio output] [src: pcm] pcm1: pcm1: +-------------------------+ pcm1: | DUMPING Volume Controls | pcm1: +-------------------------+ pcm1: pcm1: Forcing Soft PCM volume pcm1: Forcing master volume with PCM pcm1: Mixer "vol" -> "none": child=0x00000010 pcm1: Mixer "pcm": parent="vol" pcm1: Soft PCM mixer ENABLED pcm1: clone manager: deadline=750ms flags=0x8000001e pcm1: sndbuf_setmap 23bf90000, 4000; 0xffffff8238a5d000 -> 23bf90000 pcm2: <HDA NVidia GT220 HDMI PCM #0 DisplayPort> at cad 2 nid 1 on hdac0 pcm2: +--------------------------------------+ pcm2: | DUMPING PCM Playback/Record Channels | pcm2: +--------------------------------------+ pcm2: pcm2: Playback: pcm2: pcm2: Stream cap: 0x00000005 pcm2: AC3 PCM pcm2: PCM cap: 0x000e07f0 pcm2: 16 20 24 bits, 32 44 48 88 96 176 192 KHz pcm2: DAC: 4 pcm2: pcm2: +-------------------------------+ pcm2: | DUMPING Playback/Record Paths | pcm2: +-------------------------------+ pcm2: pcm2: Playback: pcm2: pcm2: nid=5 [pin: Digital-out (Jack)] pcm2: | pcm2: + <- nid=4 [audio output] [src: pcm] pcm2: pcm2: +-------------------------+ pcm2: | DUMPING Volume Controls | pcm2: +-------------------------+ pcm2: pcm2: Forcing Soft PCM volume pcm2: Forcing master volume with PCM pcm2: Mixer "vol" -> "none": child=0x00000010 pcm2: Mixer "pcm": parent="vol" pcm2: Soft PCM mixer ENABLED pcm2: clone manager: deadline=750ms flags=0x8000001e pcm2: sndbuf_setmap 7be0000, 4000; 0xffffff8238a6d000 -> 7be0000 pcm3: <HDA NVidia GT220 HDMI PCM #0 DisplayPort> at cad 3 nid 1 on hdac0 pcm3: +--------------------------------------+ pcm3: | DUMPING PCM Playback/Record Channels | pcm3: +--------------------------------------+ pcm3: pcm3: Playback: pcm3: pcm3: Stream cap: 0x00000005 pcm3: AC3 PCM pcm3: PCM cap: 0x000e07f0 pcm3: 16 20 24 bits, 32 44 48 88 96 176 192 KHz pcm3: DAC: 4 pcm3: pcm3: +-------------------------------+ pcm3: | DUMPING Playback/Record Paths | pcm3: +-------------------------------+ pcm3: pcm3: Playback: pcm3: pcm3: nid=5 [pin: Digital-out (Jack)] pcm3: | pcm3: + <- nid=4 [audio output] [src: pcm] pcm3: pcm3: +-------------------------+ pcm3: | DUMPING Volume Controls | pcm3: +-------------------------+ pcm3: pcm3: Forcing Soft PCM volume pcm3: Forcing master volume with PCM pcm3: Mixer "vol" -> "none": child=0x00000010 pcm3: Mixer "pcm": parent="vol" pcm3: Soft PCM mixer ENABLED pcm3: clone manager: deadline=750ms flags=0x8000001e pcm3: sndbuf_setmap 7bf0000, 4000; 0xffffff8238a7d000 -> 7bf0000 hdac1: Probing codec #0... hdac1: HDA Codec #0: IDT 92HD75BX hdac1: HDA Codec ID: 0x111d7603 hdac1: Vendor: 0x111d hdac1: Device: 0x7603 hdac1: Revision: 0x02 hdac1: Stepping: 0x02 hdac1: PCI Subvendor: 0x1521103c hdac1: Found audio FG nid=1 startnode=10 endnode=40 total=30 hdac1: Probing codec #1... hdac1: HDA Codec #1: Lucent/Agere Systems (Unknown) hdac1: HDA Codec ID: 0x11c11040 hdac1: Vendor: 0x11c1 hdac1: Device: 0x1040 hdac1: Revision: 0x02 hdac1: Stepping: 0x00 hdac1: PCI Subvendor: 0x1521103c hdac1: Found modem FG nid=1 startnode=2 endnode=127 total=125 hdac1: hdac1: Processing audio FG cad=0 nid=1... hdac1: GPIO: 0xc0000008 NumGPIO=8 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 hdac1: nid 10 0x2121101f as 1 seq 15 Headphones Jack jack 1 loc 33 color Black misc 0 hdac1: nid 11 0x03a1102e as 2 seq 14 Mic Jack jack 1 loc 3 color Black misc 0 hdac1: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1 hdac1: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1 hdac1: nid 14 0x21811040 as 4 seq 0 Line-in Jack jack 1 loc 33 color Black misc 0 hdac1: nid 15 0x03211030 as 3 seq 0 Headphones Jack jack 1 loc 3 color Black misc 0 hdac1: nid 20 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 hdac1: nid 24 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 hdac1: nid 25 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 hdac1: nid 30 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 hdac1: nid 31 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 hdac1: nid 32 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 hdac1: Patched pins configuration: hdac1: nid 10 0x2121101f as 1 seq 15 Headphones Jack jack 1 loc 33 color Black misc 0 hdac1: nid 11 0x03a1102e as 2 seq 14 Mic Jack jack 1 loc 3 color Black misc 0 hdac1: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1 hdac1: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1 hdac1: nid 14 0x21811040 as 4 seq 0 Line-in Jack jack 1 loc 33 color Black misc 0 hdac1: nid 15 0x03211030 as 3 seq 0 Headphones Jack jack 1 loc 3 color Black misc 0 hdac1: nid 20 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac1: nid 24 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac1: nid 25 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac1: nid 30 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac1: nid 31 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac1: nid 32 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac1: 4 associations found: hdac1: Association 0 (1) out: hdac1: Pin nid=13 seq=0 hdac1: Pin nid=10 seq=15 hdac1: Association 1 (2) in: hdac1: Pin nid=12 seq=0 hdac1: Pin nid=11 seq=14 hdac1: Association 2 (3) out: hdac1: Pin nid=15 seq=0 hdac1: Association 3 (4) in: hdac1: Pin nid=14 seq=0 hdac1: Tracing association 0 (1) hdac1: Pin 13 traced to DAC 16 hdac1: Pin 10 traced to DAC 16 and hpredir 0 hdac1: Association 0 (1) trace succeeded hdac1: Tracing association 1 (2) hdac1: Pin 12 traced to ADC 18 hdac1: Pin 11 traced to ADC 18 hdac1: Association 1 (2) trace succeeded hdac1: Tracing association 2 (3) hdac1: Pin 15 traced to DAC 17 hdac1: Association 2 (3) trace succeeded hdac1: Tracing association 3 (4) hdac1: Unable to trace pin 14 to ADC 19, undo traces hdac1: Association 3 (4) trace failed hdac1: Tracing input monitor hdac1: Tracing nid 23 to out hdac1: nid 23 is input monitor hdac1: Tracing other input monitors hdac1: Tracing nid 11 to out hdac1: Tracing nid 12 to out hdac1: Tracing beeper hdac1: Enabling headphone/speaker audio routing switching: hdac1: as=0 sense nid=10 [UNSOL] hdac1: Pin sense: nid=10 res=0x00000000 hdac1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac1: hdac1: +-------------------+ hdac1: | DUMPING HDA NODES | hdac1: +-------------------+ hdac1: hdac1: Default Parameter hdac1: ----------------- hdac1: Stream cap: 0x00000001 hdac1: PCM hdac1: PCM cap: 0x000e07e0 hdac1: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac1: IN amp: 0x80000000 hdac1: OUT amp: 0x80027f7f hdac1: hdac1: nid: 10 hdac1: Name: pin: Headphones (Black Jack) hdac1: Widget cap: 0x00400181 hdac1: UNSOL STEREO hdac1: Association: 0 (0x00008000) hdac1: Pin cap: 0x0000001c hdac1: PDC HP OUT hdac1: Pin config: 0x2121101f hdac1: Pin control: 0x00000080 HP hdac1: connections: 3 hdac1: | hdac1: + <- nid=16 [audio output] (selected) hdac1: + [DISABLED] <- nid=17 [audio output] hdac1: + [DISABLED] <- nid=23 [audio mixer] hdac1: hdac1: nid: 11 hdac1: Name: pin: Mic (Black Jack) hdac1: Widget cap: 0x00400081 hdac1: UNSOL STEREO hdac1: Association: 1 (0x00004000) hdac1: OSS: mic (mic) hdac1: Pin cap: 0x00001724 hdac1: PDC IN VREF[ 50 80 GROUND HIZ ] hdac1: Pin config: 0x03a1102e hdac1: Pin control: 0x00000024 IN VREFs hdac1: hdac1: nid: 12 hdac1: Name: pin: Mic (Fixed) hdac1: Widget cap: 0x00400081 hdac1: UNSOL STEREO hdac1: Association: 1 (0x00000001) hdac1: OSS: monitor (monitor) hdac1: Pin cap: 0x00001724 hdac1: PDC IN VREF[ 50 80 GROUND HIZ ] hdac1: Pin config: 0x90a70120 hdac1: Pin control: 0x00000024 IN VREFs hdac1: hdac1: nid: 13 hdac1: Name: pin: Speaker (Fixed) hdac1: Widget cap: 0x00400181 hdac1: UNSOL STEREO hdac1: Association: 0 (0x00000001) hdac1: Pin cap: 0x00000014 hdac1: PDC OUT hdac1: Pin config: 0x90170110 hdac1: Pin control: 0x00000040 OUT hdac1: connections: 3 hdac1: | hdac1: + <- nid=16 [audio output] (selected) hdac1: + [DISABLED] <- nid=17 [audio output] hdac1: + [DISABLED] <- nid=23 [audio mixer] hdac1: hdac1: nid: 14 [DISABLED] hdac1: Name: pin: Line-in (Black Jack) hdac1: Widget cap: 0x00400081 hdac1: UNSOL STEREO hdac1: Pin cap: 0x00001724 hdac1: PDC IN VREF[ 50 80 GROUND HIZ ] hdac1: Pin config: 0x21811040 hdac1: Pin control: 0x00000000 hdac1: hdac1: nid: 15 hdac1: Name: pin: Headphones (Black Jack) hdac1: Widget cap: 0x00400181 hdac1: UNSOL STEREO hdac1: Association: 2 (0x00000001) hdac1: Pin cap: 0x00000014 hdac1: PDC OUT hdac1: Pin config: 0x03211030 hdac1: Pin control: 0x00000040 OUT hdac1: connections: 3 hdac1: | hdac1: + [DISABLED] <- nid=16 [audio output] hdac1: + <- nid=17 [audio output] (selected) hdac1: + [DISABLED] <- nid=23 [audio mixer] hdac1: hdac1: nid: 16 hdac1: Name: audio output hdac1: Widget cap: 0x000d0c05 hdac1: LRSWAP PWR STEREO hdac1: Association: 0 (0x00008001) hdac1: OSS: pcm (pcm) hdac1: Stream cap: 0x00000001 hdac1: PCM hdac1: PCM cap: 0x000e07e0 hdac1: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac1: Output amp: 0x80027f7f hdac1: mute=1 step=127 size=2 offset=127 hdac1: hdac1: nid: 17 hdac1: Name: audio output hdac1: Widget cap: 0x000d0c05 hdac1: LRSWAP PWR STEREO hdac1: Association: 2 (0x00000001) hdac1: OSS: pcm (pcm) hdac1: Stream cap: 0x00000001 hdac1: PCM hdac1: PCM cap: 0x000e07e0 hdac1: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac1: Output amp: 0x80027f7f hdac1: mute=1 step=127 size=2 offset=127 hdac1: hdac1: nid: 18 hdac1: Name: audio input hdac1: Widget cap: 0x001d0541 hdac1: PWR PROC STEREO hdac1: Association: 1 (0x00004001) hdac1: Stream cap: 0x00000001 hdac1: PCM hdac1: PCM cap: 0x000e07e0 hdac1: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac1: connections: 1 hdac1: | hdac1: + <- nid=28 [audio selector] hdac1: hdac1: nid: 19 [DISABLED] hdac1: Name: audio input hdac1: Widget cap: 0x001d0541 hdac1: PWR PROC STEREO hdac1: Stream cap: 0x00000001 hdac1: PCM hdac1: PCM cap: 0x000e07e0 hdac1: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac1: connections: 1 hdac1: | hdac1: + <- nid=29 [audio selector] [DISABLED] hdac1: hdac1: nid: 20 [DISABLED] hdac1: Name: pin: Other (None) hdac1: Widget cap: 0x00400100 hdac1: Pin cap: 0x00000030 hdac1: OUT IN hdac1: Pin config: 0x40f000f0 hdac1: Pin control: 0x00000000 hdac1: connections: 1 hdac1: | hdac1: + <- nid=22 [audio mixer] [DISABLED] hdac1: hdac1: nid: 21 [DISABLED] hdac1: Name: audio selector hdac1: Widget cap: 0x00300101 hdac1: STEREO hdac1: connections: 3 hdac1: | hdac1: + <- nid=16 [audio output] (selected) hdac1: + <- nid=17 [audio output] hdac1: + <- nid=23 [audio mixer] hdac1: hdac1: nid: 22 [DISABLED] hdac1: Name: audio mixer hdac1: Widget cap: 0x00200100 hdac1: connections: 1 hdac1: | hdac1: + <- nid=21 [audio selector] [DISABLED] hdac1: hdac1: nid: 23 hdac1: Name: audio mixer hdac1: Widget cap: 0x0020010b hdac1: STEREO hdac1: Association: 1 (0x00004001) hdac1: OSS: mix (mix) hdac1: Input amp: 0x80051f17 hdac1: mute=1 step=31 size=5 offset=23 hdac1: connections: 5 hdac1: | hdac1: + [DISABLED] <- nid=16 [audio output] hdac1: + [DISABLED] <- nid=17 [audio output] hdac1: + [DISABLED] <- nid=20 [pin: Other (None)] [DISABLED] hdac1: + <- nid=26 [audio selector] hdac1: + <- nid=27 [audio selector] hdac1: hdac1: nid: 24 [DISABLED] hdac1: Name: pin: Other (None) hdac1: Widget cap: 0x0040000b hdac1: STEREO hdac1: Pin cap: 0x00000020 hdac1: IN hdac1: Pin config: 0x40f000f0 hdac1: Pin control: 0x00000000 hdac1: Input amp: 0x00270300 hdac1: mute=0 step=3 size=39 offset=0 hdac1: hdac1: nid: 25 [DISABLED] hdac1: Name: pin: Other (None) hdac1: Widget cap: 0x0040000b hdac1: STEREO hdac1: Pin cap: 0x00000020 hdac1: IN hdac1: Pin config: 0x40f000f0 hdac1: Pin control: 0x00000000 hdac1: Input amp: 0x00270300 hdac1: mute=0 step=3 size=39 offset=0 hdac1: hdac1: nid: 26 hdac1: Name: audio selector hdac1: Widget cap: 0x0030010d hdac1: STEREO hdac1: Association: 1 (0x00004001) hdac1: OSS: mic, monitor hdac1: Output amp: 0x00270300 hdac1: mute=0 step=3 size=39 offset=0 hdac1: connections: 3 hdac1: | hdac1: + <- nid=11 [pin: Mic (Black Jack)] hdac1: + <- nid=12 [pin: Mic (Fixed)] (selected) hdac1: + [DISABLED] <- nid=14 [pin: Line-in (Black Jack)] [DISABLED] hdac1: hdac1: nid: 27 hdac1: Name: audio selector hdac1: Widget cap: 0x0030010d hdac1: STEREO hdac1: Association: 1 (0x00004001) hdac1: OSS: mic, monitor hdac1: Output amp: 0x00270300 hdac1: mute=0 step=3 size=39 offset=0 hdac1: connections: 3 hdac1: | hdac1: + <- nid=11 [pin: Mic (Black Jack)] hdac1: + <- nid=12 [pin: Mic (Fixed)] (selected) hdac1: + [DISABLED] <- nid=14 [pin: Line-in (Black Jack)] [DISABLED] hdac1: hdac1: nid: 28 hdac1: Name: audio selector hdac1: Widget cap: 0x0030090d hdac1: LRSWAP STEREO hdac1: Association: 1 (0x00004001) hdac1: OSS: mic, mix, monitor hdac1: Output amp: 0x80050f00 hdac1: mute=1 step=15 size=5 offset=0 hdac1: connections: 4 hdac1: | hdac1: + <- nid=26 [audio selector] hdac1: + <- nid=23 [audio mixer] (selected) hdac1: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED] hdac1: + [DISABLED] <- nid=25 [pin: Other (None)] [DISABLED] hdac1: hdac1: nid: 29 [DISABLED] hdac1: Name: audio selector hdac1: Widget cap: 0x0030090d hdac1: LRSWAP STEREO hdac1: Output amp: 0x80050f00 hdac1: mute=1 step=15 size=5 offset=0 hdac1: connections: 4 hdac1: | hdac1: + <- nid=27 [audio selector] (selected) hdac1: + <- nid=23 [audio mixer] hdac1: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED] hdac1: + [DISABLED] <- nid=25 [pin: Other (None)] [DISABLED] hdac1: hdac1: nid: 30 [DISABLED] hdac1: Name: pin: Other (None) hdac1: Widget cap: 0x00400301 hdac1: DIGITAL STEREO hdac1: Pin cap: 0x00000010 hdac1: OUT hdac1: Pin config: 0x40f000f0 hdac1: Pin control: 0x00000000 hdac1: connections: 1 hdac1: | hdac1: + <- nid=36 [audio selector] [DISABLED] hdac1: hdac1: nid: 31 [DISABLED] hdac1: Name: pin: Other (None) hdac1: Widget cap: 0x00400701 hdac1: PWR DIGITAL STEREO hdac1: Pin cap: 0x00010010 hdac1: OUT EAPD hdac1: Pin config: 0x40f000f0 hdac1: Pin control: 0x00000000 hdac1: EAPD: 0x00000002 hdac1: connections: 2 hdac1: | hdac1: + <- nid=36 [audio selector] [DISABLED] (selected) hdac1: + <- nid=37 [audio selector] [DISABLED] hdac1: hdac1: nid: 32 [DISABLED] hdac1: Name: pin: Other (None) hdac1: Widget cap: 0x00400301 hdac1: DIGITAL STEREO hdac1: Pin cap: 0x00000010 hdac1: OUT hdac1: Pin config: 0x40f000f0 hdac1: Pin control: 0x00000000 hdac1: connections: 1 hdac1: | hdac1: + <- nid=37 [audio selector] [DISABLED] hdac1: hdac1: nid: 33 [DISABLED] hdac1: Name: audio output hdac1: Widget cap: 0x00040211 hdac1: DIGITAL STEREO hdac1: Stream cap: 0x00000005 hdac1: AC3 PCM hdac1: PCM cap: 0x000e07e0 hdac1: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac1: hdac1: nid: 34 [DISABLED] hdac1: Name: audio output hdac1: Widget cap: 0x00040211 hdac1: DIGITAL STEREO hdac1: Stream cap: 0x00000005 hdac1: AC3 PCM hdac1: PCM cap: 0x000e07e0 hdac1: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac1: hdac1: nid: 35 [DISABLED] hdac1: Name: vendor widget hdac1: Widget cap: 0x00f00000 hdac1: hdac1: nid: 36 [DISABLED] hdac1: Name: audio selector hdac1: Widget cap: 0x00300101 hdac1: STEREO hdac1: connections: 3 hdac1: | hdac1: + <- nid=33 [audio output] [DISABLED] (selected) hdac1: + <- nid=28 [audio selector] hdac1: + <- nid=29 [audio selector] [DISABLED] hdac1: hdac1: nid: 37 [DISABLED] hdac1: Name: audio selector hdac1: Widget cap: 0x00300101 hdac1: STEREO hdac1: connections: 3 hdac1: | hdac1: + <- nid=34 [audio output] [DISABLED] (selected) hdac1: + <- nid=28 [audio selector] hdac1: + <- nid=29 [audio selector] [DISABLED] hdac1: hdac1: nid: 38 hdac1: Name: beep widget hdac1: Widget cap: 0x0070000c hdac1: Association: -2 (0x00000000) hdac1: OSS: speaker (speaker) hdac1: Output amp: 0x80170303 hdac1: mute=1 step=3 size=23 offset=3 hdac1: hdac1: nid: 39 [DISABLED] hdac1: Name: volume widget hdac1: Widget cap: 0x00600000 hdac1: connections: 2 hdac1: | hdac1: + <- nid=16 [audio output] (selected) hdac1: + <- nid=17 [audio output] hdac1: hdac1: Processing modem FG cad=1 nid=1... hdac1: pcm4: <HDA IDT 92HD75BX PCM #0 Analog> at cad 0 nid 1 on hdac1 pcm4: +--------------------------------------+ pcm4: | DUMPING PCM Playback/Record Channels | pcm4: +--------------------------------------+ pcm4: pcm4: Playback: pcm4: pcm4: Stream cap: 0x00000001 pcm4: PCM pcm4: PCM cap: 0x000e07e0 pcm4: 16 20 24 bits, 44 48 88 96 176 192 KHz pcm4: DAC: 16 pcm4: pcm4: Record: pcm4: pcm4: Stream cap: 0x00000001 pcm4: PCM pcm4: PCM cap: 0x000e07e0 pcm4: 16 20 24 bits, 44 48 88 96 176 192 KHz pcm4: ADC: 18 pcm4: pcm4: +-------------------------------+ pcm4: | DUMPING Playback/Record Paths | pcm4: +-------------------------------+ pcm4: pcm4: Playback: pcm4: pcm4: nid=13 [pin: Speaker (Fixed)] pcm4: | pcm4: + <- nid=16 [audio output] [src: pcm] pcm4: pcm4: nid=10 [pin: Headphones (Black Jack)] pcm4: | pcm4: + <- nid=16 [audio output] [src: pcm] pcm4: pcm4: Record: pcm4: pcm4: nid=18 [audio input] pcm4: | pcm4: + <- nid=28 [audio selector] [src: mic, mix, monitor] pcm4: | pcm4: + <- nid=26 [audio selector] [src: mic, monitor] pcm4: | pcm4: + <- nid=11 [pin: Mic (Black Jack)] [src: mic] pcm4: + <- nid=12 [pin: Mic (Fixed)] [src: monitor] pcm4: + <- nid=23 [audio mixer] [src: mix] pcm4: pcm4: Input Mix: pcm4: pcm4: nid=23 [audio mixer] pcm4: | pcm4: + <- nid=26 [audio selector] [src: mic, monitor] pcm4: | pcm4: + <- nid=11 [pin: Mic (Black Jack)] [src: mic] pcm4: + <- nid=12 [pin: Mic (Fixed)] [src: monitor] pcm4: + <- nid=27 [audio selector] [src: mic, monitor] pcm4: | pcm4: + <- nid=11 [pin: Mic (Black Jack)] [src: mic] pcm4: + <- nid=12 [pin: Mic (Fixed)] [src: monitor] pcm4: pcm4: +-------------------------+ pcm4: | DUMPING Volume Controls | pcm4: +-------------------------+ pcm4: pcm4: Master Volume (OSS: vol) pcm4: | pcm4: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute pcm4: pcm4: PCM Volume (OSS: pcm) pcm4: | pcm4: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute pcm4: pcm4: Speaker/Beep Volume (OSS: speaker) pcm4: | pcm4: +- ctl 14 (nid 38 out): -18/0dB (4 steps) + mute pcm4: pcm4: Recording Level (OSS: rec) pcm4: | pcm4: +- ctl 11 (nid 27 out): 0/30dB (4 steps) pcm4: +- ctl 12 (nid 28 out): 0/22dB (16 steps) + mute pcm4: pcm4: Input Mix Level (OSS: mix) pcm4: | pcm4: +- ctl 6 (nid 23 in 3): -34/12dB (32 steps) + mute pcm4: +- ctl 7 (nid 23 in 4): -34/12dB (32 steps) + mute pcm4: +- ctl 11 (nid 27 out): 0/30dB (4 steps) pcm4: pcm4: Mixer "vol": pcm4: Mixer "pcm": pcm4: Mixer "speaker": pcm4: Mixer "mix": pcm4: Mixer "rec": pcm4: clone manager: deadline=750ms flags=0x8000001e pcm4: sndbuf_setmap 7d20000, 4000; 0xffffff8238a8d000 -> 7d20000 pcm4: sndbuf_setmap 7d30000, 4000; 0xffffff8238a9d000 -> 7d30000 pcm5: <HDA IDT 92HD75BX PCM #1 Analog> at cad 0 nid 1 on hdac1 pcm5: +--------------------------------------+ pcm5: | DUMPING PCM Playback/Record Channels | pcm5: +--------------------------------------+ pcm5: pcm5: Playback: pcm5: pcm5: Stream cap: 0x00000001 pcm5: PCM pcm5: PCM cap: 0x000e07e0 pcm5: 16 20 24 bits, 44 48 88 96 176 192 KHz pcm5: DAC: 17 pcm5: pcm5: +-------------------------------+ pcm5: | DUMPING Playback/Record Paths | pcm5: +-------------------------------+ pcm5: pcm5: Playback: pcm5: pcm5: nid=15 [pin: Headphones (Black Jack)] pcm5: | pcm5: + <- nid=17 [audio output] [src: pcm] pcm5: pcm5: +-------------------------+ pcm5: | DUMPING Volume Controls | pcm5: +-------------------------+ pcm5: pcm5: Master Volume (OSS: vol) pcm5: | pcm5: +- ctl 2 (nid 17 out): -95/0dB (128 steps) + mute pcm5: pcm5: PCM Volume (OSS: pcm) pcm5: | pcm5: +- ctl 2 (nid 17 out): -95/0dB (128 steps) + mute pcm5: pcm5: Mixer "vol": pcm5: Mixer "pcm": pcm5: clone manager: deadline=750ms flags=0x8000001e pcm5: sndbuf_setmap 7d50000, 4000; 0xffffff8238aad000 -> 7d50000 usbus0: 480Mbps High Speed USB v2.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 480Mbps High Speed USB v2.0 ahcich0: AHCI reset... ahcich0: SATA connect time=100us status=00000123 ahcich0: AHCI reset: device found ahcich1: AHCI reset... ahcich1: SATA connect time=1000us status=00000113 ahcich1: AHCI reset: device found ahcich1: AHCI reset: device ready after 1msugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <0x1033> at usbus1 uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 (aprobe1:ahcich1:0:0:0): SIGNATURE: eb14 ahcich2: AHCI reset... ahcich2: SATA connect timeout time=10000us status=00000000 ahcich2: AHCI reset: device not found ahcich3: AHCI reset... ahcich3: SATA connect timeout time=10000us status=00000000 ahcich3: AHCI reset: device not found ahcich4: AHCI reset... ahcich4: SATA connect timeout time=10000us status=00000000 ahcich4: AHCI reset: device not found battery0: battery initialization start battery1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ahcich0: AHCI reset: device ready after 100ms (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0GEOM: new disk ada0 ada0: <Hitachi HTS543232A7A384 ES2OA70B> ATA-8 SATA 2.x device ada0: Serial Number 110326E243124304JANH ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) pass0 at ahcich0 bus 0 scbus0 target 0 lun 0 pass0: <Hitachi HTS543232A7A384 ES2OA70B> ATA-8 SATA 2.x device pass0: Serial Number 110326E243124304JANH pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass0: Command Queueing enabled pass1 at ahcich1 bus 0 scbus1 target 0 lun 0 pass1: <hp CDDVDW TS-L633N 0300> Removable CD-ROM SCSI-0 device pass1: Serial Number R3186GYZ548618 pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) llaappiicc45:: CMCCMIC Iu numnamsaksedked SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff(cd0: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ffahcich1:0: timer: 0x000200ef therm: 0x00010000 err: 0x000000f00: pmc: 0x000104000): SCSI status error cmci: 0x000100f2 (cd0:ahcich1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahcich1:0:0:0): CAM status: SCSI Status Error (cd0:ahcich1:0:0:0): SCSI status: Check Condition (cd0:ahcich1:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ahcich1:0:0:0): Error 6, Unretryable error cd0 at ahcich1 bus 0 scbus1 target 0 lun 0SMP: AP CPU #3 Launched! cd0: cpu3 AP:<hp CDDVDW TS-L633N 0300> Removable CD-ROM SCSI-0 device ID: 0x05000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff cd0: Serial Number R3186GYZ548618 lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff cd0: 150.000MB/s transfers timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 ( pmc: 0x00010400SATA 1.x, UDMA5, cmci: 0x000000f2ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x04000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x000000f2 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 4 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 5 vector 48 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 49 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 4 vector 49 msi: Assigning MSI IRQ 256 to local APIC 5 vector 49 msi: Assigning MSI IRQ 258 to local APIC 1 vector 50 msi: Assigning MSI IRQ 259 to local APIC 4 vector 50 msi: Assigning MSI IRQ 260 to local APIC 5 vector 50 battery0: battery initialization done, tried 1 times pcib6: pccard0 requested memory range 0x88000000-0xffffffffffffffff: good CIS is too long -- truncating pccard0: CIS version unknown (major=-1, minor=-1) pccard0: CIS info: pccard0: Manufacturer code 0xffffffff, product 0xffffffff pccard0: function 0: unspecified, ccr addr 0xeab4dfed mask 0xfffffdff pccard0: Function 0 has no config entries.! uhub1: 4 ports with 4 removable, self powered GEOM: new disk cd0 (cd0:ahcich1:0:0:0): SCSI status error (cd0:ahcich1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahcich1:0:0:0): CAM status: SCSI Status Error (cd0:ahcich1:0:0:0): SCSI status: Check Condition (cd0:ahcich1:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ahcich1:0:0:0): Error 6, Unretryable error (cd0:ahcich1:0:0:0): SCSI status error (cd0:ahcich1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahcich1:0:0:0): CAM status: SCSI Status Error (cd0:ahcich1:0:0:0): SCSI status: Check Condition (cd0:ahcich1:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ahcich1:0:0:0): Error 6, Unretryable error (cd0:ahcich1:0:0:0): SCSI status error (cd0:ahcich1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahcich1:0:0:0): CAM status: SCSI Status Error (cd0:ahcich1:0:0:0): SCSI status: Check Condition (cd0:ahcich1:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed) (cd0:ahcich1:0:0:0): Error 6, Unretryable error Root mount waiting for: usbus2 usbus0 uhub0: 3 ports with 3 removable, self powered uhub2: 3 ports with 3 removable, self powered Root mount waiting for: usbus2 usbus0 ugen0.2: <vendor 0x8087> at usbus0 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 ugen0.3: <Broadcom Corp> at usbus0 ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/3.06, addr 3> on usbus0 ugen0.4: <vendor 0x138a> at usbus0 Root mount waiting for: usbus0 ugen0.5: <Chicony Electronics Co., Ltd.> at usbus0 Trying to mount root from zfs:zroot start_init: trying /sbin/init GEOM_ELI: Device gpt/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware linprocfs registered lagg0: bpf attached wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: 88:ae:1d:aa:7f:77 fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 splash: image decoder found: daemon_saver wlan0: promiscuous mode enabled em0: promiscuous mode enabled lagg0: promiscuous mode enabled battery1: battery initialization failed, giving up
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGsORuCUkXK_5LnZ6ffD_%2Ba96rK0Pj2VLugi1%2BUeq9sHBUSTAw>