Date: Thu, 14 Mar 2013 19:20:48 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Joshua Isom <jrisom@gmail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Fine, OK, here's my initial AR9380/AR9485 support Message-ID: <CAJ-Vmok255ODmYaq5FShODzeLt9QvAeNS7Ef-7sVF5_BSoq2Vg@mail.gmail.com> In-Reply-To: <514284E5.9060303@gmail.com> References: <5142813d.83c2e00a.67a8.39d5@mx.google.com> <514284E5.9060303@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Oh! http://wikidevi.com/wiki/TP-LINK_TL-WDN4800 Silly me, I was reading the wrong number on my phone. Yes, 0x0030 is Osprey (AR9380.) kldload if_ath_pci too. :-) Adrian On 14 March 2013 19:18, Joshua Isom <jrisom@gmail.com> wrote: > Not a laptop, but here's the vendor's website. > http://www.tp-link.com/en/products/details/?model=TL-WDN4800 > > > On 3/14/2013 9:02 PM, Adrian Chadd wrote: >> >> 0x3112? What nic is that? >> >> I'll go and take a quick look at the reference driver. Can you google >> your laptop model and see what you can find? >> >> >> Adrian >> >> >> Sent from my Palm Pre on AT&T >> >> ------------------------------------------------------------------------ >> >> On Mar 14, 2013 6:31 PM, Joshua Isom <jrisom@gmail.com> wrote: >> >> On 3/13/2013 7:31 PM, Adrian Chadd wrote: >>> >>> On 9 March 2013 10:54, Adrian Chadd <adrian@freebsd.org> wrote: >>> >>>> What's tested: >>>> >>>> * legacy, 1x1 and 2x2 HT20/HT40, STA mode >>>> * AR9380 (1x1, 2x2 - 2/5ghz) >>>> * AR9485 (1x1, 2ghz only) >>> >>> >>> I can now add two more NICs to this list: >>> >>> * AR9390 (HB116) >>> * AR9462 (WB225) >>> >>> Thanks, >>> >>> >>> Adrian >>> _______________________________________________ >>> freebsd-wireless@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>> To unsubscribe, send any mail to >>> "freebsd-wireless-unsubscribe@freebsd.org" >>> >> >> >> I've got it all compiled and booted, but the driver's not finding the >> card. Any ideas? >> >>> [jri:~] root# uname -a >>> FreeBSD jri.homeunix.com 10.0-CURRENT FreeBSD 10.0-CURRENT #5 r248281M: >>> Thu Mar 14 18:55:48 CDT 2013 >>> root@jri.homeunix.com:/usr/obj/root/ATH/head/sys/ATH amd64 >>> [jri:~] root# pciconf -lv # Truncated >>> none3@pci0:2:0:0: class=0x028000 card=0x3112168c chip=0x0030168c >>> rev=0x01 hdr=0x00 >>> vendor = 'Atheros Communications Inc.' >>> device = 'AR9300 Wireless LAN adaptor' >>> class = network >>> [jri:~] root# diff ATH/head/sys/amd64/conf/{ATH,GENERIC} >>> 27,30d26 >>> < options ATH_DEBUG >>> < options AH_DEBUG >>> < options ATH_DIAGAPI >>> < >>> 142c138 >>> < #device cd # CD >>> --- >>>> >>>> device cd # CD >>> >>> [jri:~] root# ifconfig >>> nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>> 1500 >>> options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE> >>> ether 6c:f0:49:d5:6f:6a >>> inet 192.168.1.6 netmask 0xffffff00 broadcast 192.168.1.255 >>> inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255 >>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >>> media: Ethernet autoselect (1000baseT <full-duplex>) >>> status: active >>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >>> options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> >>> inet6 ::1 prefixlen 128 >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 >>> inet 127.0.0.1 netmask 0xff000000 >>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >>> [jri:~] root# kldload if_ath >>> kldload: can't load if_ath: File exists >> >> >> _______________________________________________ >> freebsd-wireless@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless >> To unsubscribe, send any mail to >> "freebsd-wireless-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmok255ODmYaq5FShODzeLt9QvAeNS7Ef-7sVF5_BSoq2Vg>