Date: Sat, 8 Mar 2014 07:44:44 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Milan Obuch <freebsd-mips@dino.sk> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: I (think) the AR8327 switch support now works Message-ID: <CAJ-VmokM5mPxMbbVyaSpyDcn-Fs32g4heWMPZF7n2OpnFK31oA@mail.gmail.com> In-Reply-To: <20140308140901.19782009@zeta.dino.sk> References: <CAJ-Vmok0cVLnH9DQh%2Bz6XF-NQmPKy_Ez37kLtuCSRThwjQHTJQ@mail.gmail.com> <20140301143607.13a96bd6@zeta.dino.sk> <CAJ-Vmom2coTLFn0zcTa=BzxAOopMjCDUBOtQwOVOyQmCeB19wA@mail.gmail.com> <20140301200546.7ff373d1@zeta.dino.sk> <20140301231239.023b8733@zeta.dino.sk> <CAJ-VmoknT-SWVmcDX-Cx8StUVuZNX%2BqNPzLcMBdLxN7qwssNoA@mail.gmail.com> <20140307140432.0a460da1@zeta.dino.sk> <CAJ-Vmok-nF4QdVmUMGJxt4tX=X%2Bvc4_-G100ZPRnQ-2aWyNCog@mail.gmail.com> <20140307204230.3c86b9b1@zeta.dino.sk> <CAJ-Vmo=B0CG1FSCKYeaCmORJuWbJ24g=%2BQkHV7WC8DTV9m1zKA@mail.gmail.com> <20140308140901.19782009@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
Hm, On 8 March 2014 05:09, Milan Obuch <freebsd-mips@dino.sk> wrote: > On Sat, 8 Mar 2014 00:55:38 -0800 > Adrian Chadd <adrian@freebsd.org> wrote: > >> Look at if_arge.c - arge_fetch_mdiobus_clock_rate() . See whether the >> openwrt config sets the mdiobus frequency to something. >> >> The AR9344 defaults to 'MAC_MII_CFG_CLOCK_DIV_58'. >> >> Maybe you can fiddle with which divisor it uses. >> >> >> -a >> > > OK, I will try to look there, but in between, some outcome from my > tests. > > 1. AR8327 does not teel much - all I can see there is just > > argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0 > mdio0: <MDIO> on argemdio0 > mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 > arswitch0: readreg 0: 12041204 > Use 0x08x instead of %d - that way it's more obvious what it's reading. > Nothing else. Do you have any idea why there is only one read of > register at address 0? Where is this read in source? What is in this > register? It looks like there is expected some other value and > therefore AR8327 is not recognised. > > 2. AR9340 is not correctly initialised, at least I can't see any > traffic passing to physical port(s) - I can start dhclient arge1 but I > see nothing at DHCP server comming from that particular MAC, thus no > address is beeing assigned. If I assign IP manually, packets do not > reach wire - nothing is seen there. If arswitch0 doesn't create an mdiobus1, then it'll not all probe right. What's the current full dmesg? -a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokM5mPxMbbVyaSpyDcn-Fs32g4heWMPZF7n2OpnFK31oA>