Date: Tue, 28 Jan 2014 14:21:57 -0200 From: Pedro Flynn <pedro.flynn@gmail.com> To: freebsd-wireless@freebsd.org Subject: Fwd: FreeBSD 10.0: hostapd crash with Ralink 3070 Message-ID: <CAN48zxmxL_h=9B32C1dC5uGAbV_ExEXQoumPS1Zwvwt2RAbPUQ@mail.gmail.com> In-Reply-To: <CAN48zx=zhBYSnkm4Kszs4oe1MdGPrP01B_0eysyso7T5a_WWMA@mail.gmail.com> References: <CAN48zxmMZHsjr55AAbFaeB591Ahd9S1-AkGksRiRtgNOJv6DYQ@mail.gmail.com> <CALCpEUHRsquBrE4o6WxfcLgi-O2BN1FtPa%2BrS2Cdk==0dUdPaA@mail.gmail.com> <CAN48zxkXiUFyGuysTSkEPiwdS9VvEZgeyvo1eTr_seFQ2yM-6A@mail.gmail.com> <CAN48zxn%2BeKDFCbFDHwBJOUfyqvjH3whttTH0whtTfgBQxFRrGA@mail.gmail.com> <CAJ-VmonPDSHOzuD8bqpjLC1FjYQqHrwz2-w8u5wCqUw-hspVfQ@mail.gmail.com> <CAN48zx=zhBYSnkm4Kszs4oe1MdGPrP01B_0eysyso7T5a_WWMA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Adrian,
This morning I installed 10.0-RELEASE on a second machine (I had to
rollback my router to 9.2) with the same hardware with dumpdev set to YES
in rc.conf. I will generate the crashdump as soon as I get home.
Thanks,
pflynn
On Tue, Jan 28, 2014 at 2:11 PM, Adrian Chadd <adrian@freebsd.org> wrote:
> Do you get a crashdump that you can feed into kgdb upon reboot? If
> not, would you mind enabling crashdumps?
>
>
>
> -a
>
>
> On 28 January 2014 02:57, Pedro Flynn <pedro.flynn@gmail.com> wrote:
> > (sorry - this reply was sent only to Hiren. Here is it for the list)
> >
> >
> > Hi Hiren,
> >
> > this is what I get immediately after starting hostapd - via "service
> > hostapd onestart", since I need to do it manually as the system will
> reboot
> > in loop if I enable
> > hostapd in rc.conf):
> >
> > KDB: stack backtrace
> > #0 0xffffffff808e7dd0 at kbd_backtrace+0x60
> > #1 0xffffffff808af8b5 at panic+0x115
> > #2 0xffffffff80c8e692 at trap_fatal+0x3a2
> > #3 0xffffffff80c8e969 at trap_pfault+0x2c9
> > #4 0xffffffff80c8e0f6 at trap+0x5e6
> > #5 0xffffffff80c75392 at calltrap+0x8
> > #6 0xffffffff81a158bc at run_update_beacon+0x16c
> > #7 0xffffffff809b42bd at ieee80211_wme_update_params_locked+0x32d
> > #8 0xffffffff809b437a at ieee80211_wme_update_params+0x5a
> > #9 0xffffffff809bb3f43 at ieee80211_wme_init_params+0x2a3
> > #10 0xffffffff809a9aec at ieee80211_sta_join1+0xdc
> > #11 0xffffffff8099047b at hostap_newstate+0x2eb
> > #12 0xffffffff81a1636a at run_newstate+0x83a
> > #13 0xffffffff809b2edf at ieee80211_newstate_cb+0x14f
> > #14 0xffffffff808f5b66 at taskqueue_run_locked+0xe6
> > #15 0xffffffff808f63e8 at taskqueue_thread_loop+0xa8
> > #16 0xffffffff8088198a at fork_exit+0x9a
> > #17 0xffffffff80c758ce at fork_trampoline+0xe
> > Uptime: 45 s
> > Automatic reboot in 15 seconds - press a key on the console to abort
> > --> Press a key on the console to reboot,
> > --> or switch off the station now.
> >
> > Thanks for any help or suggestion.
> >
> > pflynn
> >
> >
> > On Mon, Jan 27, 2014 at 8:43 PM, hiren panchasara <
> > hiren.panchasara@gmail.com> wrote:
> >
> >> On Mon, Jan 27, 2014 at 2:16 PM, Pedro Flynn <pedro.flynn@gmail.com>
> >> wrote:
> >>
> >> > I can provide information as needed.
> >>
> >> Sharing lots of kernel debug messages that you are seeing might be a
> >> good start :-)
> >>
> >> cheers,
> >> Hiren
> >>
> > _______________________________________________
> > freebsd-wireless@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> > To unsubscribe, send any mail to "
> freebsd-wireless-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN48zxmxL_h=9B32C1dC5uGAbV_ExEXQoumPS1Zwvwt2RAbPUQ>