Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 15 Dec 2014 15:06:34 -0800
From:      Mehmet Erol Sanliturk <m.e.sanliturk@gmail.com>
To:        Rick Macklem <rmacklem@uoguelph.ca>
Cc:        freebsd-net@freebsd.org, =?UTF-8?B?R2Vycml0IEvDvGhu?= <gerrit.kuehn@aei.mpg.de>
Subject:   Re: compiling on nfs directories
Message-ID:  <CAOgwaMvAN1zLhZYSuPxa5n8V9=QAj9Y7hmsmCYSYwqjy0fg-6w@mail.gmail.com>
In-Reply-To: <2048229686.13136235.1418677169130.JavaMail.root@uoguelph.ca>
References:  <CAOgwaMs%2BYLUoLSHDsu6BOYgwr_oi09xNk9yOnSNYjjXqaiDCQQ@mail.gmail.com> <2048229686.13136235.1418677169130.JavaMail.root@uoguelph.ca>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Dec 15, 2014 at 12:59 PM, Rick Macklem <rmacklem@uoguelph.ca> wrote=
:
>
> Mehmet Erol Sanliturk wrote:
> > On Mon, Dec 15, 2014 at 1:24 AM, Gerrit K=C3=BChn
> > <gerrit.kuehn@aei.mpg.de>
> > wrote:
> > >
> > > Hi all,
> > >
> > > I ran into some weird issue here last week:
> > > I have an NFS-Server for storage and diskless booting (pxe / nfs
> > > root)
> > > running under FreeBSD. The clients are running Gentoo Linux. Some
> > > time
> > > ago, I replaced the server, going from a HDD-based storage array
> > > (ZFS)
> > > under FreeBSD 8.3 to an SSD-based array under FreeBSD 10-stable (as
> > > of
> > > February this year - I know this needs updates).
> > >
> > > Only now I recognized that this somehow appears to have broken some
> > > of my
> > > Gentoo ebuilds that do not install cleanly anymore. They complain
> > > about
> > > "soiled libtool library files found" and "insecure RUNPATHs" in the
> > > installation stage of shared libs.
> > >
> > > I was not able to find any useful solution for this in the Net so
> > > far.
> > > However, I was able to verify that this is somehow an issue with
> > > the nfs
> > > server by plugging in a USB-drive into the diskless clients and
> > > mounting
> > > this as /var/tmp/portage (the directory structure where Gentoo's
> > > ebuilds
> > > are compiled). This makes the error messages go away, and
> > > everything works
> > > again (like it did before the server update).
> > >
> > > Are there any suggestions what might be causing this and how to fix
> > > it?
> > >
> > >
> > > cu
> > >   Gerrit
> > >
> > >
> >
> >
> > With respect to information given in your message , may pure guess is
> > the
> > following :
> >
> >
> > When a client generates a file in NFS server , it assumes that
> > everything
> > is written into the file .
> > The next step ( reading the generated file ) starts , BUT the file is
> > NOT
> > completely written into disk yet ,
> > therefore it reads an incomplete file which causes errors in the
> > client .
> >
> Well, not exactly. The NFS client chooses whether or not the written
> data must be committed to stable storage (disk) right away via a flag
> argument on the write. It is up to the client to keep track of what has
> been written and if the FILE_STABLE flag wasn't set, must do a separate
> Commit RPC to force the data to stable storage on the server.
> It is also up to the NFS client to keep track of the file's size while
> it is being grown, since the NFS server's size may be smaller until
> the data gets written to the server.
> Also, note that he didn't see the problem with FreeBSD8.3, which would
> have been following the same rules on the server as 10.1.
>
> What I suspect might cause this is one of two things:
> 1 - The modify time of the file is now changing at a time the Linux
>     client doesn't expect, due to changes in ZFS or maybe TOD clock
>     resolution. (At one time, the TOD clock was only at a resolution
>     of 1sec, so the client wouldn't see the modify time change often.
>     I think it is now at a much higher resolution, but would have to
>     look at the code/test to be sure.)
> 2 - I think you mention this one later in your message, in that the
>     build might be depending on file locking. If this is the case,
>     trying NFSv4, which does better file locking, might fix the
>     problem.
>
> Gerrit, I would suggest that you do "nfsstat -m" on the Linux client,
> to see what the mount options are. The Linux client might be using NFSv4
> already.
> Also, avoid "soft, intr" especially if you are using NFSv4, since these
> can cause slow server response to result in a failure of a read/write
> when it shouldn't fail, due to timeout or interruption by a signal.
>
> If you could find out more about what causes the specific build failure
> on the Linux side, that might help.
> If you can reproduce a build failure quickly/easily, you can capture
> packets via "tcpdump -s 0 -w <file> host <client-hostname>" on the
> server and then look at it in wireshark to see what the server is replyin=
g
> when the build failure occurs. (I don't mind looking at a packet trace if
> it is relatively small, if you email it to me as an attachment.)
>
> Good luck with it, rick
> ps: I am not familiar with the Linux mount options, but if it has
>     stuff like "nocto", you could try those.
>
> > In FreeBSD NFS server , there is NOT ( or I could NOT be able to find
> > ) a
> > facility to store written data immediately into disk .
> >
> > NFS server is collecting data up to a point ( number of bytes ) and
> > then
> > writing it to disk , during this phase ( whether the NFS server is
> > busy or
> > not ) is not important ) . With this structure ,
> > the tasks which a program writes a small number of bytes to be read
> > by
> > another program can not be
> > processed by a NFS server only .
> >
> > I did not try "locking in NFS server" : If this route is taken , then
> > it is
> > necessary to adjust the clients for such periods to wait that NFS
> > server
> > has removed the lock which themselves can continue ( Each such read
> > requires a waiting loop without generating an error message about
> > unavailable data and termination . ) .
> >
> > In Linux NFS server , there is an option to immediately write the
> > received
> > data into disk . This is improving the above situation considerable
> > but not
> > completely solving the problem ( because during reads of data , data
> > in
> > cache is NOT concatenated to the data in disk ) .
> >
> >
> > Another MAJOR problem is that , the NFS server is NOT concatenating
> > data in
> > cache to data in disk during reads : This defect is making NFS server
> > useless for , let's say "real time" , applications used concurrently
> > or as
> > a single one by the clients without using another "Server" within NFS
> > server .
> >
> >
> >
> > In your case , during software builds , a step is using the
> > previously
> > generated files : In local disk , writing and reading are sequential
> > , in
> > the sense that written data is found during reading . In NFS server
> > this is
> > not the case .
> >
> >
> > With respect to my knowledge obtained from messages in FreeBSD
> > mailing
> > lists about making a possibility to read data immediately after it is
> > written into NFS server is NOT available .
> >
> >
> >
> > Thank you very much .
> >
> > Mehmet Erol Sanliturk
> > _______________________________________________
> >





When a C program is written to be used in an NFS environment , some
possibilities may be used to synchronize write and reads from the programs
with the unsolved "cached data" problem .

When ready programs are used , such as "make" , "ld" , there is no choice .

I am using Pascal programs , then there is no such facilities .

The solution may be to improve the NFS Server and Client modules to use
cached data  during reads :

If end of file is reached : Before sending EOF signal , check whether there
is data in cache or not .
         If there is data in cache : continue reading from the cache up to
end ,
            else send an EOF signal .

( For random access files , also there is a need to look at the cached
values . )

Since the above modification requires knowledge of internal structure of
NFS Server , and perhaps NFS Client ,I am not able to supply any patch .
Also I am not able to understand its implementation difficulty .

My opinion is that the above modification would be a wonderful improvement
for NFS system  in FreeBSD , because it will behave just like a local data
store usable as "real time" data processing tasks . In the present
structure , this is NOT possible with NFS Client and Server only .


Thank you very much .


Mehmet Erol Sanliturk



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAOgwaMvAN1zLhZYSuPxa5n8V9=QAj9Y7hmsmCYSYwqjy0fg-6w>