Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 06 Feb 2001 12:56:27 -0500
From:      root@twwells.com
To:        questions@freebsd.org
Subject:   acd0: READ_BIG - ILLEGAL REQUEST
Message-ID:  <E14QCLr-0002M6-00@twwells.com>

next in thread | raw e-mail | index | archive | help
Since upgrading to 4.2 (from 3.somethingorother), my cdrom has
been misbehaving. Reproducibly, by doing an ls -R on the 4.2
RELEASE cdrom, I get

acd0: READ_BIG - ILLEGAL REQUEST asc=64 ascq=00 error=00

periodically. It happens at more or less predictable spots but I
don't think it's a bad CD; I can use the CD elsewhere. Also, it's
not jumpers -- I fiddled with those and the problem didn't go
away. I should also mention that the ls -R more or less works
except that some directories don't appear. However, cd'ing to
those directories and doing an ls works.

The system has been upgraded to 4.2-STABLE as of yesterday
afternoon and the problems are still there. Here's the dmesg
output:

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #1: Mon Feb  5 17:41:52 EST 2001
    root@twwells.com:/usr/obj/usr/src/sys/TWWELLS
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 350796441 Hz
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x580  Stepping = 0
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 134201344 (131056K bytes)
avail memory = 127856640 (124860K bytes)
Preloaded elf kernel "kernel" at 0xc02b8000.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xd800-0xd8ff mem 0xdf000000-0xdf0000ff irq 10 at device 10.0 on pci0
dc0: Ethernet address: 00:a0:cc:e2:ff:24
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <S3 ViRGE DX/GX graphics accelerator> at 11.0 irq 11
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd400-0xd40f irq 0 at device 15.0 on pci0
ata1: at 0x170 irq 15 on atapci0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pca0 at port 0x40 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
aha0 at port 0x330-0x333 irq 9 drq 6 on isa0
aha0: AHA-1540/1542 64 head BIOS FW Rev. 0.8 (ID=41) SCSI Host Adapter, SCSI ID 7, 16 CCBs
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 1000 packets/entry by default
DUMMYNET initialized (010124)
acd0: CDROM <SAMSUNG CD-ROM SCR-3231> at ata1-master using PIO4
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at aha0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL SE8.4S PJ0A> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: 8191MB (16777215 512 byte sectors: 64H 32S/T 8191C)
cd9660: RockRidge Extension
acd0: READ_BIG - ILLEGAL REQUEST asc=64 ascq=00 error=00
acd0: READ_BIG - ILLEGAL REQUEST asc=64 ascq=00 error=00
acd0: READ_BIG - ILLEGAL REQUEST asc=64 ascq=00 error=00
acd0: READ_BIG - ILLEGAL REQUEST asc=64 ascq=00 error=00


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E14QCLr-0002M6-00>