Date: Mon, 16 Apr 2012 19:31:58 +1000 From: Jan Mikkelsen <janm@transactionware.com> To: Doug Ambrisko <ambrisko@ambrisko.com> Cc: freebsd-stable@freebsd.org Subject: Re: LSI MegaRAID SAS 9240 with mfi driver? Message-ID: <EBA4C7CF-DB99-40EF-B5B3-BD44CF6279DB@transactionware.com> In-Reply-To: <201203301414.q2UEEiNb078707@ambrisko.com> References: <201203301414.q2UEEiNb078707@ambrisko.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 31/03/2012, at 1:14 AM, Doug Ambrisko wrote:
> John Baldwin writes:
> | On Friday, March 30, 2012 12:06:40 am Jan Mikkelsen wrote:
> | > Hi,
> | >
...
>=20
> | > I have a loan LSI MegaRAID SAS 9240-4i controller for testing.
> | > The pciconf -lv output is:
> | >=20
> | > none3@pci0:1:0:0: class=3D0x010400 card=3D0x92411000 =
chip=3D0x00731000 rev=3D0x03 hdr=3D0x00
> | > vendor =3D 'LSI Logic / Symbios Logic'
> | > device =3D 'MegaRAID SAS 9240'
> | > class =3D mass storage
> | > subclass =3D RAID
> | >=20
> | > I added this line to src/sys/dev/mfi/mfi_pci.c
> | >=20
> | > {0x1000, 0x0073, 0xffff, 0xffff, MFI_FLAGS_GEN2, "LSI MegaRAID =
SAS 9240"},
> | >=20
> | > It gave this result (tried with hw.mfi.msi set to 0 and to 1):
> | >=20
> | > mfi0: <LSI MegaRAID SAS 9240> port 0xdc00-0xdcff mem =
0xfe7bc000-0xfe7bffff,0xfe7c0000-0xfe7fffff irq 16 at device 0.0 on pci1
> | > mfi0: Using MSI
> | > mfi0: Megaraid SAS driver Ver 3.00=20
> | > mfi0: Frame 0xffffff8000285000 timed out command 0x26C8040
> | > mfi0: failed to send init command
> | >=20
> | > The firmware is package 20.10.1-0077, which is the latest on the =
LSI website.
> | >=20
> | > Is this path likely to work out? Any suggestions on where to go =
from here?
> |=20
> | You should try the updated mfi(4) driver that Doug (cc'd) is going =
to soon
> | merge into HEAD. It syncs up with the mfi(4) driver on LSI's =
website which
> | supports several cards that the current mfi(4) driver does not. =
(I'm not
> | fully sure if the 9240 is in that group or not. Doug might know =
however.)
>=20
> Yes, this card is supported with the mfi(4) in projects/head_mfi. =
Looks
> like we fixed a couple of last minute found bugs when trying to create =
a
> RAID wth mfiutil. This should be fixed now. I'm going to start the
> merge to -current today. The version in head_mfi can run on older
> versions of FreeBSD with the changes that Sean did.
I have just imported the mfi(4) and mfiutil(8) into a 9.0-RELEASE tree =
to try this out.
When booting up with two fresh drives attached, they show up as usable =
JBOD disks. However, I cannot use mfiutil to create anything with them. =
Every drive gives
"mfiutil: Drive n not available"
Is this expected behaviour? How can I create a raid1 volume using =
mfiutil and clean disks?
I tried using MegaCli from the LSI website (versions 8.02.16 and =
8.02.21), but they can't even detect the controller. I know you said at =
some point that a very recent version of MegaCli was required. What =
version is necessary?
dmesg:
mfi0: <Drake Skinny> port 0xdc00-0xdcff mem =
0xfe7bc000-0xfe7bffff,0xfe7c0000-0xfe7fffff irq 16 at device 0.0 on pci1
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23=20
mfi0: 7021 (387925223s/0x0020/info) - Shutdown command received from =
host
mfi0: 7022 (boot + 4s/0x0020/info) - Firmware initialization started =
(PCI ID 0073/1000/9241/1000)
mfi0: 7023 (boot + 4s/0x0020/info) - Firmware version 2.120.244-1482
mfi0: 7024 (boot + 5s/0x0020/info) - Package version 20.10.1-0077
mfi0: 7025 (boot + 5s/0x0020/info) - Board Revision 03A
mfi0: 7026 (boot + 33s/0x0002/info) - Inserted: PD 32(e0xff/s1)
mfisyspd0: <MFI System PD> on mfi0
mfisyspd0: 1907729MB (3907029168 sectors) SYSPD volume
mfisyspd0: SYSPD volume attached
mfisyspd1: <MFI System PD> on mfi0
mfisyspd1: 1907729MB (3907029168 sectors) SYSPD volume
mfisyspd1: SYSPD volume attached
Thanks,
Jan Mikkelsen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EBA4C7CF-DB99-40EF-B5B3-BD44CF6279DB>