Date: Mon, 18 Dec 2000 21:45:36 -0500 From: "Sergio Jachtchenco" <jachs@hstsoft.com> To: <freebsd-alpha@FreeBSD.ORG> Subject: RE: IDE CMD 649 and AS200-233 Message-ID: <NDBBKEACGOLIMOGBLFGLGEBECGAA.jachs@hstsoft.com> In-Reply-To: <14910.48457.983867.653307@grasshopper.cs.duke.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message-----
> From: owner-freebsd-alpha@FreeBSD.ORG
> [mailto:owner-freebsd-alpha@FreeBSD.ORG]On Behalf Of Andrew Gallatin
> Sent: Monday, December 18, 2000 20:46
> To: jachs@hstsoft.com
> Cc: freebsd-alpha@FreeBSD.ORG
> Subject: Re: IDE CMD 649 and AS200-233
>
>
> >
> > How do I do it? Do I have to set a kernel option or maybe a boot flag?
>
> Break into the bootloader during its countdown and say "boot -v"
> Copyright (c) 1992-2000 The FreeBSD Project.
This is the output of kernel.GENERIC. The board in quetion has vendor
id:0x1095.
=========================================================================
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Tue Nov 21 09:42:09 GMT 2000
jkh@rawhide.osd.bsdi.com:/usr/src/sys/compile/GENERIC
AlphaStation 200/400 ("Avanti")
AlphaStation 200 4/233, 233MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=0
OSF PAL rev: 0x100000002012e
real memory = 98615296 (96304K bytes)
Physical memory chunk(s):
0x00782000 - 0x05ff5fff, 92749824 bytes (11322 pages)
avail memory = 89743360 (87640K bytes)
Preloaded elf kernel "kernel.GENERIC" at 0xfffffc0000766000.
md0: Malloc disk
Creating DISK md0
found-> vendor=0x1000, dev=0x0001, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00010000, size 8
map[14]: type 1, range 32, base 82010000, size 8
found-> vendor=0x8086, dev=0x0484, revid=0x43
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1011, dev=0x0002, revid=0x24
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 00010100, size 7
map[14]: type 1, range 32, base 82010100, size 7
found-> vendor=0x1095, dev=0x0649, revid=0x01
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
found-> vendor=0x5333, dev=0x5631, revid=0x06
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 84000000, size 26
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x82010000-0x820100ff irq 11 at device
6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 274 msec, 32439 KHz
sym0: Delay (GEN=11): 261 msec, 34054 KHz
sym0: Delay (GEN=11): 261 msec, 34054 KHz
sym0: interrupting at ISA irq 11
isab0: <Intel 82378IB PCI to ISA bridge> at device 7.0 on pci0
Bus Modes: Bus Park, Resource Lock,
IDE controller: Secondary (170h-177h,376h,377h)
Floppy controller: 370h,371h
Floppy controller: 372h-377h
Keyboard controller: 60h,62h,64h,66h
RTC: 70h-77h
Configuration RAM: 0C00h,0800h-08FFh
Port 92: enabled
isa0: <ISA bus> on isab0
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x82010100-0x8201017f
irq 5 at device 11
.0 on pci0
de0: interrupting at ISA irq 5
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:23:5c:9a
bpf: de0 attached
atapci0: <CMD 649 ATA100 controller> irq 9 at device 12.0 on pci0
atapci0: Busmastering DMA not supported
ata-: ata2 exists, using next available unit number
ata2: probe allocation failed
ata3: probe allocation failed
pci0: <S3 ViRGE graphics accelerator> (vendor=0x5333, dev=0x5631) at 13.0
irq 10
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0003
atkbd: keyboard ID 0x83ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0043
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 c8
psm: status 90 03 c8
psm: status 90 03 c8
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 233331980 Hz (firmware 233100233 Hz)
sio0: irq maps: 0x60 0x70 0x60 0x60
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0
ppc0: using normal I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled portppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
isa_probe_children: probing PnP devices
Timecounter "alpha" frequency 233331980 Hz
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
bpf: sl0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
de0: enabling 10baseT port
(probe5:sym0:0:5:0): phase change 6-2 6@45e1e598 resid=5.
Creating DISK da0
Creating DISK cd0
pass0 at sym0 bus 0 target 0 lun 0
pass0: <QUANTUM FIREBALL ST4.3S 0F04> Fixed Direct Access SCSI-2 device
pass0: Serial Number 154708342861
pass0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
pass1 at sym0 bus 0 target 5 lun 0
pass1: <CHINON CD-ROM CDS-535 Q11> Removable CD-ROM SCSI-2 device
pass1: Serial Number \^_
pass1: 3.300MB/s transfers
(cd0:sym0:0:5:0): phase change 6-2 6@45e96998 resid=5.
da0 at sym0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST4.3S 0F04> Fixed Direct Access SCSI-2 device
da0: Serial Number 154708342861
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
pass1: 3.300MB/s transfers
(cd0:sym0:0:5:0): phase change 6-2 6@45e96998 resid=5.
da0 at sym0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST4.3S 0F04> Fixed Direct Access SCSI-2 device
da0: Serial Number 154708342861
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 4159MB (8519216 512 byte sectors: 255H 63S/T 530C)
Mounting root from ufs:/dev/da0a
(cd0:sym0:0:5:0): phase change 6-2 6@45e96998 resid=5.
(cd0:sym0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:sym0:0:5:0): NOT READY asc:3a,0
(cd0:sym0:0:5:0): Medium not present
cd0 at sym0 bus 0 target 5 lun 0
cd0: <CHINON CD-ROM CDS-535 Q11> Removable CD-ROM SCSI-2 device
cd0: Serial Number \^_
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0: invalid primary partition table: no magic
start_init: trying /sbin/init
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NDBBKEACGOLIMOGBLFGLGEBECGAA.jachs>