Date: Sat, 11 Sep 2004 17:01:53 -0700 From: "Mitch (bitblock)" <mitch@bitblock.com> To: "Bob Ababurko" <ababurko@adelphia.net>, freebsd-net@FreeBSD.org Subject: RE: gateway for separate networks Message-ID: <OCEGLFACMGOKINMEOKANGEKEDJAA.mitch@bitblock.com> In-Reply-To: <5.2.1.1.0.20040911194241.01c0e928@mail.dc2.adelphia.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Assuming the second nic is used for it's own private subnet, and not a second route to the internet (which would require a much fancier setup ;-) you don't need to do anything except add the interface, configure it, and adjust any firewall rules to allow whatever access you need. Any services you are running on the box that SPECIFICALLY listen to a certain address may be changed to listen on all addresses or to add this new address if needed. hth. m/ > -----Original Message----- > From: owner-freebsd-net@freebsd.org > [mailto:owner-freebsd-net@freebsd.org]On Behalf Of Bob Ababurko > Sent: Saturday, September 11, 2004 4:49 PM > To: freebsd-net@FreeBSD.org > Subject: gateway for separate networks > > > Hello all- > > I want to install another NIC in my box running 5.2.1 to > access another > network. Since I have never done this before, I have a question > about the > gateway that the second NIC will use....more specifically, where do I > configure the gateway for the second NIC. I have the > defaultrouter in the > rc.conf file for the first, do I do the same or do I add routes to tackle > this. If someone could show me any resources on the web that deals with > this,that would be great. > > thanks, > Bob > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?OCEGLFACMGOKINMEOKANGEKEDJAA.mitch>