Date: Tue, 5 Aug 1997 13:16:44 +0200 (MET DST) From: Jakob Alvermark <jakob@teligent.se> To: Luigi Rizzo <luigi@labinfo.iet.unipi.it> Cc: multimedia@FreeBSD.ORG Subject: Re: Aztech MMPro 16 II Message-ID: <Pine.BSF.3.91.970805131235.3624H-100000@datorn.teligent.se> In-Reply-To: <199708041110.NAA10161@labinfo.iet.unipi.it>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 4 Aug 1997, Luigi Rizzo wrote: > > Hello! > > > > I'm trying to use the above with FreeBSD 2.2.1, with small amount of luck. > > I've installed FreeBSD and DOS on the same disk, so that I can set the=20 > > card in MSS mode (the card can emulate both SoundBlaster Pro and=20 > > try my latest snap, http://www.iet.unipi.it/~luigi/snd970731.tgz > (or wait for the next one tomorrow), MSS cards (and PnP ones as well) > work very well with it. Tried that now. Even worse luck than the "built in" sound driver. Your driver doesn´t even probe the card right. Here's the dmesg: pcm0 at 0xffff irq 10 drq 1 mem 0x00000000 flags 0x00000000 en 1 confl 0 no address supplied, try default 0x0530 no address supplied, try default sb_reset_dsp failed pcm0 not found at 0xffffffff midi0 at 0xffff irq -1 drq -1 mem 0x00000000 flags 0x00000000 en 1 confl 0 midi0 not found at 0xffffffff synth0 at 0xffff irq -1 drq -1 mem 0x00000000 flags 0x00000000 en 1 confl 0 synth0 not found at 0xffffffff I'm still thinking about the irq stuff. In DOS, it doesn't seems to use the irq at all. Strange or normal? Should I try guspnp instead? Any differencies in the MSS code in 2.2.1-R and guspnp? Cheers, Jakob Alvermark ------------------------------------------------------- Teligent AB, P.O. Box 213, S-149 23 Nynäshamn, Sweden Telephone +46-(0)8 520 660 00 * Fax +46-(0)8 520 193 36 Direct +46-(0)8 520 660 32 * GSM +46-(0)70 792 16 57
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.970805131235.3624H-100000>