Date: Mon, 10 May 1999 15:16:15 -0500 (CDT) From: "James D. Butt 'J.D'" <jbutt@mwci.net> To: mike@smith.net.au, Tom <tom@uniserve.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Serial Console does it work?? (Plea for help) Message-ID: <Pine.BSF.4.01.9905101502280.2057-100000@boom.firecracker.com> In-Reply-To: <Pine.BSF.4.02A.9905101257070.2345-100000@shell.uniserve.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
> > I have spent quite a while looking at this serial console issue.. > > I saw your old e-mail. It seems that your configuring the serial > console the very old way. You don't need to recompile either the kernel > or the boot blocks, as both support it by default now. You basically just > need to put the correct flags into /boot.config and start a getty and you > are done. If the cause is some simple config issue I am very sorrt for wasting peoples time but I am not preceiving it as that because I have even had other people here look at this (as a sanity check) and we can still not get it work work) Thank You in advance.. /boot.config contains -D -h (though I have tried -P but I can not use it because the paticular bios I have does not support booting without a keyboard ..grr..) My kernel config file device sio0 at isa? port "IO_COM1" flags 0x20 tty irq 4 Snipit from ttys.. console "/usr/libexec/getty std.9600" vt100 on secure the above line was added by installing the comconsole port.. # #cuaa0 "/usr/libexec/getty std.9600" vt100 on secure I can get a login to spawn if I uncomment the above line.. In all past 2.2.x releases I was able to use ttyd0 instead of cuaa0?? Seems strange but hey... When the boot loader loads I am able to use the serial console to set options ect.. but when it loads the kernel for what ever reason it reverts back to the vga... (But I will eventually get the console prompt) Am I incorrect to assume that the old FORCE_COMCONSOLE back in 2.2.x releases would not show anything on VGA but the boot loader and the the login prompt (aka the output of device probes ect are sent to the serial port (and most importantly when a boot fails because of file system problems you can fsck the drives manualy) is not how the current serial console works?? I have set this up a ton of times with 2.2.x releases... -------------------------------------------------------------------------- James D. Butt 'J.D.' jbutt@mwci.net - jbutt@firecracker.com MidWest Communications, Inc. -------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.01.9905101502280.2057-100000>