Date: Tue, 10 Nov 1998 01:20:31 -0400 (AST) From: The Hermit Hacker <scrappy@hub.org> To: Paul Saab <paul@mu.org> Cc: current@FreeBSD.ORG Subject: Re: 18gig drive's supported? Message-ID: <Pine.BSF.4.05.9811100118590.337-100000@thelab.hub.org> In-Reply-To: <19981109140601.A2798@mu.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 9 Nov 1998, Paul Saab wrote:
> did you upgrade this system from a pre-cam system? If you did I
> think you need to upgrade sysinstall too.
Yes...next question, how to upgrade sysinstall? Went into
/usr/src/release/sysinstall, typed 'make cleandir;make depend'...it
failed:
file2c 'u_char boot0[] = {' '};' < /boot/boot0 >> makedevs.tmp
cannot open /boot/boot0: no such file
*** Error code 2
Am still an aout system...if that means anything/helps?
>
> paul
>
> The Hermit Hacker (scrappy@hub.org) wrote:
> > I dont' know if there is anything special that the OS has to do as far as
> > large drive support is concerneed, but we just added the following drive
> > to our system, and can't get anywhere with it:
> >
> > a1 at ahc0 bus 0 target 1 lun 0
> > da1: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
> > da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
> > da1: <COMPAQ DGHS18Y 01A0> Fixed Direct Access SCSI3 device
> >
> >
> > We currently have three controllers in that machine, with 2+ drives per
> > controller...the other drives all work (4gig drives), but this new 18gig
> > appears to be a problem.
> >
> > hub> dmesg | grep ahc
> > ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x01 int a irq 12 on pci0.9.0
> > ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
> > ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x01 int a irq 9 on pci0.10.0
> > ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
> > ahc2: <Adaptec 2940A Ultra SCSI adapter> rev 0x01 int a irq 11 on pci0.12.0
> > ahc2: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
> > probe1:ahc0:0:1:0): Sending SDTR!!
> > ub> dmesg | grep "^da" | sort
> > da0 at ahc0 bus 0 target 0 lun 0
> > da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
> > da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
> > da0: <QUANTUM VIKING II 4.5WSE 3506> Fixed Direct Access SCSI2 device
> > da1 at ahc0 bus 0 target 1 lun 0
> > da1: 17366MB (35566000 512 byte sectors: 255H 63S/T 2213C)
> > da1: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
> > da1: <COMPAQ DGHS18Y 01A0> Fixed Direct Access SCSI3 device
> > da2 at ahc1 bus 0 target 0 lun 0
> > da2: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enables
> > da2: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
> > da2: <QUANTUM XP34550W LYK8> Fixed Direct Access SCSI2 device
> > da3 at ahc1 bus 0 target 1 lun 0
> > da3: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
> > da3: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
> > da3: <QUANTUM XP34550W LYK8> Fixed Direct Access SCSI2 device
> > da4 at ahc2 bus 0 target 1 lun 0
> > da4: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
> > da4: 4106MB (8410200 512 byte sectors: 255H 63S/T 523C)
> > da4: <QUANTUM XP34301 1071> Fixed Direct Access SCSI2 device
> > da5 at ahc2 bus 0 target 2 lun 0
> > da5: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
> > da5: 4106MB (8410200 512 byte sectors: 255H 63S/T 523C)
> > da5: <QUANTUM XP34301 1071> Fixed Direct Access SCSI2 device
> > da6 at ahc2 bus 0 target 3 lun 0
> > da6: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
> > da6: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
> > da6: <QUANTUM XP34550S LXY4> Fixed Direct Access SCSI2 device
> > da7 at ahc2 bus 0 target 4 lun 0
> > da7: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
> > da7: 4106MB (8410200 512 byte sectors: 255H 63S/T 523C)
> > da7: <QUANTUM XP34301 1071> Fixed Direct Access SCSI2 device
> > da8 at ahc2 bus 0 target 5 lun 0
> > da8: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
> > da8: 4101MB (8399520 512 byte sectors: 255H 63S/T 522C)
> > da8: <Quantum XP34300 L912> Fixed Direct Access SCSI2 device
> >
> > If I run /stand/sysinstall->Configure->Label, I get back a message stating
> > that 'No disks found! Please verify that your disk controller is being
> > properly probed at boot time'
> >
> > The system comes out on uname -a as 3.0-CURRENT, dated November 4th...
> >
> > Thoughts and/or ideas? Its obvious that the kernel is finding all the drives,
> > so I'm curious why /stand/sysinstall doesn't see them...
> >
> > Thanks...
> >
> >
> > Marc G. Fournier
> > Systems Administrator @ hub.org
> > primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-current" in the body of the message
>
Marc G. Fournier
Systems Administrator @ hub.org
primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9811100118590.337-100000>