Date: Sun, 14 Mar 2004 14:02:32 -0800 (PST) From: Julian Elischer <julian@elischer.org> To: "Cordula's Web" <cpghost@cordula.ws> Cc: freebsd-stable@freebsd.org Subject: Re: HEADSUP!!! USB MFC committed Message-ID: <Pine.BSF.4.21.0403141401220.7997-100000@InterJet.elischer.org> In-Reply-To: <20040314164340.003C44088F@fw.farid-hajji.net>
next in thread | previous in thread | raw e-mail | index | archive | help
thanks for getting back to me.. I will be doing work on USB next week, and I will try trace this then.. have you tried -current with your device? Julian On Sun, 14 Mar 2004, Cordula's Web wrote: > Hi Julian, > > this USB MFC broke my CASIO QV-4000 digicam downloads, which worked > very well just before. > > umass0: CASIO product 0x1001, rev 1.00/10.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <CASIO DIGITAL_CAMERA 1.00> Removable Direct Access SCSI-0 device > da0: 150KB/s transfers > da0: 1027MB (2104704 512 byte sectors: 255H 63S/T 131C) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1a f5 22 0 0 38 0 > (da0:umass-sim0:0:0:0): ABORTED COMMAND asc:4e,0 > (da0:umass-sim0:0:0:0): Overlapped commands attempted > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1a f5 22 0 0 38 0 > (da0:umass-sim0:0:0:0): ABORTED COMMAND asc:4e,0 > (da0:umass-sim0:0:0:0): Overlapped commands attempted > > Mounting /dev/da0s1, ls et al. still works well, but as soon > as I start downloading the files with, say, "cp -Rv /mnt/* .", > the cp command hangs hard after having copied 5 or 6 small files. > The only way out is to turn the camera off, get a few errors: > > umass0: CBI reset failed, IOERROR > umass0: CBI bulk-in stall clear failed, IOERROR > umass0: CBI bulk-out stall clear failed, IOERROR > vnode_pager_getpages: I/O read error > vm_fault: pager read error, pid 7337 (cp) > umass0: at uhub0 port 1 (addr 2) disconnected > (da0:umass-sim0:0:0:0): lost device > umass0: detached > umass-sim:0:0:0:func_code 0x0901: Invalid target (target needed) > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x39, > scsi status == 0x0 > umass-sim:0:0:0:func_code 0x0901: Invalid target (target needed) > (da0:umass-sim0:0:0:0): removing device entry > > and then umount manually. > > Please help. > > Cheers, > -cpghost. > > -- > Cordula's Web. http://www.cordula.ws/ > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0403141401220.7997-100000>