Date: Mon, 7 Nov 2005 16:31:24 +0100 From: Claus Guttesen <kometen@gmail.com> To: Scott Long <scottl@samsco.org> Cc: freebsd-amd64 List <freebsd-amd64@freebsd.org> Subject: Re: amd64 does not see all 4 GB RAM on tyan GT24 Message-ID: <b41c75520511070731i15017f97i@mail.gmail.com> In-Reply-To: <436F69DB.8060408@samsco.org> References: <b41c75520511070648v5d438bf7y@mail.gmail.com> <436F69DB.8060408@samsco.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
> > Just received a Tyan GT24 with a S2891 board. In the
> > bios-setup-utility the board has 4 GB RAM, but when FreeBSD 6.0
> > release boot it only recognizes 3 GB. Dmesg:
>
> Please send the verbose boot output, specifically the lines that
> mention 'SMAP'.
Did a verbose boot but no lines mentioning SMAP. Verbose dmes is attached.
regards
Claus
[-- Attachment #2 --]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Mon Nov 7 16:30:28 CET 2005
claus@ulla.eurofoto.no:/usr/obj/usr/src/sys/WEBSRV
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8060b000.
Calibrating clock(s) ... i8254 clock: 1193292 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2210196430 Hz
CPU: Dual Core AMD Opteron(tm) Processor 275 (2210.20-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
Hyperthreading: 2 logical CPUs
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 3488743424 (3327 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000090fff, 589824 bytes (144 pages)
0x0000000000708000 - 0x00000000c9d66fff, 3378900992 bytes (824927 pages)
avail memory = 3368710144 (3212 MB)
ACPI APIC Table: <PTLTD APIC >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 3, logical 0:3
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 3, Interrupt 24 at 0xdf200000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
MADT: Found IO APIC ID 4, Interrupt 28 at 0xdf201000
ioapic2: intpin 0 -> PCI IRQ 28 (level, low)
ioapic2: intpin 1 -> PCI IRQ 29 (level, low)
ioapic2: intpin 2 -> PCI IRQ 30 (level, low)
ioapic2: intpin 3 -> PCI IRQ 31 (level, low)
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
mem: <memory>
io: <I/O>
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=058000] [hdr=00] is there (id=005e10de)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 24 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 1
pci_link0: <ACPI PCI Link LNK1> irq 0 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link1: <ACPI PCI Link LNK2> irq 0 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link2: <ACPI PCI Link LNK3> irq 0 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link3: <ACPI PCI Link LNK4> irq 0 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link4: <ACPI PCI Link LNK5> irq 0 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 16 17 18 19
pci_link5: <ACPI PCI Link LSMB> irq 0 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link6: <ACPI PCI Link LUS0> irq 0 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link7: <ACPI PCI Link LUS2> irq 0 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link8: <ACPI PCI Link LMAC> irq 0 on acpi0
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link9: <ACPI PCI Link LACI> irq 0 on acpi0
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link10: <ACPI PCI Link LMCI> irq 0 on acpi0
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link11: <ACPI PCI Link LPID> irq 0 on acpi0
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link12: <ACPI PCI Link LTID> irq 0 on acpi0
pci_link12: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link12: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link12: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link13: <ACPI PCI Link LSI1> irq 0 on acpi0
pci_link13: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link13: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link13: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link14: <ACPI PCI Link APCP> irq 0 on acpi0
pci_link14: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link14: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
pci_link14: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 20 21 22 23
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.1.INTA at func 1: 255
ACPI: Found matching pin for 0.2.INTA at func 0: 10
pci_link6: BIOS IRQ 10 for -2145972136.2.INTA is invalid
ACPI: Found matching pin for 0.2.INTB at func 1: 11
pci_link7: BIOS IRQ 11 for -2145972136.2.INTB is invalid
ACPI: Found matching pin for 0.7.INTA at func 0: 10
pci_link12: BIOS IRQ 10 for -2145972136.7.INTA is invalid
ACPI: Found matching pin for 0.8.INTA at func 0: 11
pci_link13: BIOS IRQ 11 for -2145972136.8.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x005e, revid=0xa3
bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0051, revid=0xa3
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00008c00, size 10, enabled
found-> vendor=0x10de, dev=0x0052, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00000000, size 5, enabled
map[20]: type 4, range 32, base 00005000, size 6, enabled
map[24]: type 4, range 32, base 00005040, size 6, enabled
found-> vendor=0x10de, dev=0x005a, revid=0xa2
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dd000000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LUS0:0)
pci_link6: Picked IRQ 20 with weight 0
ioapic0: Changing polarity for pin 20 to high
pcib0: slot 2 INTA routed to irq 20 via \\_SB_.PCI0.LUS0
found-> vendor=0x10de, dev=0x005b, revid=0xa3
bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dd001000, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.LUS2:0)
pci_link7: Picked IRQ 21 with weight 0
ioapic0: Changing polarity for pin 21 to high
pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.LUS2
found-> vendor=0x10de, dev=0x0053, revid=0xa2
bus=0, slot=6, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001400, size 4, enabled
found-> vendor=0x10de, dev=0x0054, revid=0xa3
bus=0, slot=7, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001440, size 3, enabled
map[14]: type 4, range 32, base 00001434, size 2, enabled
map[18]: type 4, range 32, base 00001438, size 3, enabled
map[1c]: type 4, range 32, base 00001430, size 2, enabled
map[20]: type 4, range 32, base 00001410, size 4, enabled
map[24]: type 1, range 32, base dd002000, size 12, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI0.LTID:0)
pci_link12: Picked IRQ 22 with weight 0
ioapic0: Changing polarity for pin 22 to high
pcib0: slot 7 INTA routed to irq 22 via \\_SB_.PCI0.LTID
found-> vendor=0x10de, dev=0x0055, revid=0xa3
bus=0, slot=8, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001458, size 3, enabled
map[14]: type 4, range 32, base 0000144c, size 2, enabled
map[18]: type 4, range 32, base 00001450, size 3, enabled
map[1c]: type 4, range 32, base 00001448, size 2, enabled
map[20]: type 4, range 32, base 00001420, size 4, enabled
map[24]: type 1, range 32, base dd003000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LSI1:0)
pci_link13: Picked IRQ 23 with weight 0
ioapic0: Changing polarity for pin 23 to high
pcib0: slot 8 INTA routed to irq 23 via \\_SB_.PCI0.LSI1
found-> vendor=0x10de, dev=0x005c, revid=0xa2
bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x005d, revid=0xa3
bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0: <serial bus, USB> at device 2.1 (no driver attached)
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1400
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
atapci1: <nVidia nForce4 SATA150 controller> port 0x1440-0x1447,0x1434-0x1437,0x1438-0x143f,0x1430-0x1433,0x1410-0x141f mem 0xdd002000-0xdd002fff irq 22 at device 7.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1410
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdd002000
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1440
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1434
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1438
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1430
ata3: SATA connect ready time=0ms
ata3: sata_connect devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
atapci2: <nVidia nForce4 SATA150 controller> port 0x1458-0x145f,0x144c-0x144f,0x1450-0x1457,0x1448-0x144b,0x1420-0x142f mem 0xdd003000-0xdd003fff irq 23 at device 8.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1420
atapci2: [MPSAFE]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdd003000
atapci2: [MPSAFE]
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1458
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x144c
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1450
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1448
ata5: SATA connect status=00000000
ata5: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xdd100000-0xdeffffff
pcib1: prefetched decode 0xfff00000-0xfffff
ACPI: Found matching pin for 0.7.INTA at func 0: 22
pci_link2: BIOS IRQ 22 for 0.7.INTA is invalid
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base de000000, size 24, enabled
pcib1: (null) requested memory range 0xde000000-0xdeffffff: good
map[14]: type 4, range 32, base 00002000, size 8, enabled
pcib1: (null) requested I/O range 0x2000-0x20ff: in range
map[18]: type 1, range 32, base dd100000, size 12, enabled
pcib1: (null) requested memory range 0xdd100000-0xdd100fff: good
pcib1: matched entry for 1.7.INTA (src \\_SB_.PCI0.LNK3:0)
pci_link2: Picked IRQ 16 with weight 0
ioapic0: Changing polarity for pin 16 to high
pcib1: slot 7 INTA routed to irq 16 via \\_SB_.PCI0.LNK3
pci1: <display, VGA> at device 7.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI2 - AE_NOT_FOUND
pci8: <ACPI PCI bus> on pcib3
pci8: physical bus=8
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=8, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 64, base df200000, size 12, enabled
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=8, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 64, base df201000, size 12, enabled
pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci9: <ACPI PCI bus> on pcib4
pci9: physical bus=9
pci8: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8
pcib5: secondary bus 10
pcib5: subordinate bus 10
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xdf300000-0xdf3fffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib5
pci10: physical bus=10
found-> vendor=0x14e4, dev=0x1648, revid=0x03
bus=10, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base df310000, size 16, enabled
pcib5: (null) requested memory range 0xdf310000-0xdf31ffff: good
map[18]: type 1, range 64, base df300000, size 16, enabled
pcib5: (null) requested memory range 0xdf300000-0xdf30ffff: good
pcib5: matched entry for 10.9.INTA
pcib5: slot 9 INTA hardwired to IRQ 28
found-> vendor=0x14e4, dev=0x1648, revid=0x03
bus=10, slot=9, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base df330000, size 16, enabled
pcib5: (null) requested memory range 0xdf330000-0xdf33ffff: good
map[18]: type 1, range 64, base df320000, size 16, enabled
pcib5: (null) requested memory range 0xdf320000-0xdf32ffff: good
pcib5: matched entry for 10.9.INTB
pcib5: slot 9 INTB hardwired to IRQ 29
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xdf310000-0xdf31ffff,0xdf300000-0xdf30ffff irq 28 at device 9.0 on pci10
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf310000
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:e0:81:31:8a:94
bge0: [MPSAFE]
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xdf330000-0xdf33ffff,0xdf320000-0xdf32ffff irq 29 at device 9.1 on pci10
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdf330000
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:e0:81:31:8a:95
bge1: [MPSAFE]
pci8: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0067
psm0: failed to reset the aux device.
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff on isa0
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 212431 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100463122 hz
Timecounter "TSC" frequency 2210196430 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on nVidia nForce4 chip
acd0: setting UDMA33 on nVidia nForce4 chip
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
acd0: <QSI CD-ROM SCR-242/CXAC> CDROM drive at ata1 as master
acd0: read 4133KB/s (4133KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 157066MB <HDT722516DLA380 V43OA80A> at ata2-master SATA150
ad4: 321672960 sectors [319120C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 157066MB <HDT722516DLA380 V43OA80A> at ata3-master SATA150
ad6: 321672960 sectors [319120C/16H/63S] 16 sectors/interrupt 1 depth queue
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00040010 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00040010 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
ioapic2: routing intpin 0 (PCI IRQ 28) to cluster 0
ioapic2: routing intpin 1 (PCI IRQ 29) to cluster 0
GEOM: new disk ad6
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
pci0: driver added
found-> vendor=0x10de, dev=0x005e, revid=0xa3
bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:0: reprobing on driver added
found-> vendor=0x10de, dev=0x0052, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
pci0:1:1: reprobing on driver added
found-> vendor=0x10de, dev=0x005a, revid=0xa2
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=20
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:2:0: reprobing on driver added
found-> vendor=0x10de, dev=0x005b, revid=0xa3
bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:2:1: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:7:0: reprobing on driver added
pci2: driver added
pci8: driver added
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci8:10:1: reprobing on driver added
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci8:11:1: reprobing on driver added
pci9: driver added
pci10: driver added
pci0: driver added
found-> vendor=0x10de, dev=0x005e, revid=0xa3
bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:0: reprobing on driver added
found-> vendor=0x10de, dev=0x0052, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
pci0:1:1: reprobing on driver added
found-> vendor=0x10de, dev=0x005a, revid=0xa2
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=20
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:2:0: reprobing on driver added
ohci0: <OHCI (generic) USB controller> mem 0xdd000000-0xdd000fff irq 20 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdd000000
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
fdc0: input ready timeout
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
found-> vendor=0x10de, dev=0x005b, revid=0xa3
bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:2:1: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:7:0: reprobing on driver added
pci2: driver added
pci8: driver added
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci8:10:1: reprobing on driver added
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci8:11:1: reprobing on driver added
pci9: driver added
pci10: driver added
pci0: driver added
found-> vendor=0x10de, dev=0x005e, revid=0xa3
bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:0: reprobing on driver added
found-> vendor=0x10de, dev=0x0052, revid=0xa2
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
pci0:1:1: reprobing on driver added
found-> vendor=0x10de, dev=0x005b, revid=0xa3
bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
pci0:2:1: reprobing on driver added
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdd001000-0xdd0010ff irq 21 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdd001000
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
bge0: gigabit link up
bge0: link state changed to UP
bge1: gigabit link up
bge1: link state changed to UP
pci1: driver added
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:7:0: reprobing on driver added
pci2: driver added
pci8: driver added
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci8:10:1: reprobing on driver added
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=8, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci8:11:1: reprobing on driver added
pci9: driver added
pci10: driver added
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b41c75520511070731i15017f97i>