Date: Tue, 3 Sep 2013 20:36:14 -0300 From: "Nenhum_de_Nos" <matheus@eternamente.info> To: freebsd-embedded@freebsd.org Subject: Dlink DIR-825 B1 trial Message-ID: <b9e5a389e69c587c54ac71e70ae47cfd.squirrel@arroway.org>
next in thread | raw e-mail | index | archive | help
hail,
just splitting that thread. I git it to work, and when ath was on, that got on my screen.
is this known ?
att,
matheus
Starting kernel ...
CPU platform: Atheros AR7161 rev 2
CPU Frequency=680 MHz
CPU DDR Frequency=340 MHz
CPU AHB Frequency=170 MHz
platform frequency: 680000000
CPU reference clock: 40 MHz
arguments:
a0 = 00000007
a1 = a3f7bfb0
a2 = a3f7c460
a3 = 00000008
Cmd line:argv is invalid
Environment:
envp is invalid
Cache info:
picache_stride = 4096
picache_loopcount = 16
pdcache_stride = 4096
pdcache_loopcount = 8
cpu0: MIPS Technologies processor v116.147
MMU: Standard TLB, 16 entries
L1 i-cache: 4 ways of 512 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config3=0x20
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0 r254983: Wed Aug 28 15:44:20 BRT 2013
root@dev:/root/work/freebsd/head/obj/mipseb/mips.mips/root/work/freebsd/head/src/sys/DIR-825 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:
MEMGUARD map base: 0xc0800000
MEMGUARD map size: 104860 KBytes
real memory = 67108864 (65536K bytes)
avail memory = 59285504 (56MB)
random device not loaded; using insecure entropy
nexus0: <MIPS32 root nexus>
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 340000000 Hz quality 800
Event timer "MIPS32" frequency 340000000 Hz quality 800
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> on apb0
uart0: console (115200,n,8,1)
pcib0 at irq 0 on nexus0
pcib0: ar71xx_pci_attach: missing hint 'baseslot', default to AR71XX_PCI_BASE_SLOT
pcib0: found EEPROM at 0x1f661000 on 0.17.0
pcib0: EEPROM firmware: 0x1f661000 @ 4096 bytes
pcib0: device EEPROM 'pcib.0.bus.0.17.0.eeprom_firmware' registered
pcib0: found EEPROM at 0x1f665000 on 0.18.0
pcib0: EEPROM firmware: 0x1f665000 @ 4096 bytes
pcib0: device EEPROM 'pcib.0.bus.0.18.0.eeprom_firmware' registered
pci0: <PCI bus> on pcib0
pci0: <network> at device 17.0 (no driver attached)
pci0: <network> at device 18.0 (no driver attached)
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC from EEPROM
arge0: Vendor stores MAC in ASCII format
arge0: finishing attachment, phymask 0000, proxy null
arge0: Ethernet address: 84:c9:b2:5c:c6:bc
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Overriding MAC from EEPROM
arge1: Vendor stores MAC in ASCII format
arge1: finishing attachment, phymask 0000, proxy null
arge1: Ethernet address: 84:c9:b2:5c:c6:be
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <spibus bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0
mx25l0: m25p64, sector 65536 bytes, 128 sectors
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
Timecounters tick every 1.000 msec
map/rootfs.uncompress: GEOM_ULZMA image found
map/rootfs.uncompress: 174 x 131072 blocks
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/map/rootfs.uncompress []...
warning: no time-of-day clock registered, system time will not be set accurately
Aug 29 02:31:15 init: login_getclass: unknown class 'daemon'
*** Populating /var ..
*** Loading configuration files ..
*** Restoring from /dev/map/cfg ..
1+0 records in
1+0 records out
65536 bytes transferred in 4.150455 secs (15790 bytes/sec)
gunzip: (stdin): trailing garbage ignored
etc/cfg/manifest
etc/master.passwd
etc/group
etc/cfg/rc.conf
etc/cfg/hostapd.wlan0.conf
etc/cfg/hostapd.wlan1.conf
10 blocks
*** Completed.
*** setting up hostname
*** Load kernel modules
random: <Software, Yarrow> initialized
ath0: <Atheros 9220> irq 0 at device 17.0 on pci0
ath0: ath_pci_attach: EEPROM firmware @ 0xc6ecb000
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9220 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ath1: <Atheros 9220> irq 1 at device 18.0 on pci0
ath1: ath_pci_attach: EEPROM firmware @ 0xc6ece000
[ath] enabling AN_TOP2_FIXUP
ath1: [HT] enabling HT modes
ath1: [HT] 1 stream STBC receive enabled
ath1: [HT] 1 stream STBC transmit enabled
ath1: [HT] 2 RX streams; 2 TX streams
ath1: AR9220 mac 128.2 RF5133 phy 13.0
ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
*** bringing up loopback ..
*** Starting networking via /etc/rc.d/base/net
dev.ath.0.txq_mcastq_maxdepth: 512 -> 32
dev.ath.1.txq_mcastq_maxdepth: 512 -> 32
*** Interface: arge0: start
*** Interface: arge0: done
*** Interface: wlan0: start
wlan0: Ethernet address: 20:11:91:53:59:44
ifconfig: unknown/undefined channel number 36 flags 0x0
*** Starting hostapd..
Configuration file: /etc/cfg/hostapd.wlan0.conf
Using interface wlan0 with hwaddr 20:11:91:53:59:44 and ssid "WLAN-TT_"
ieee80211_load_module: load the wlan_tkip module by hand for now.
ioctl[SIOCS80211, op=19, val=0, arg_len=64]: Device not configured
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
*** Interface: wlan0: done
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
*** Interface: wlan1: start
wlan1: Ethernet address: 59:44:91:53:20:11
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ifconfig: unknown/undefined channel number 6 flags 0x480
*** Starting hostapd..
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
Configuration file: /etc/cfg/hostapd.wlan1.conf
Using interface wlan1 with hwaddr 59:44:91:53:20:11 and ssid "WLAN-T_"
[zone: mbuf_cluster] kern.ipc.nmbclusters limit reached
ieee80211_load_module: load the wlan_ccmp module by hand for now.
ioctl[SIOCS80211, op=19, val=0, arg_len=64]: Device not configured
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
*** Interface: wlan1: done
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
*** Interface: bridge0: start
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
bridge0: Ethernet address: 7e:5b:05:9f:59:79
wlan0: promiscuous mode enabled
bridge0: link state changed to UP
ar5416StopDmaReceive: dma failed to stop in 10ms
AR_CR=0x00000024
AR_DIAG_SW=0x42000020
wlan1: start 60 second CAC timer on channel 52 (5260 MHz)
wlan1: promiscuous mode enabled
arge0: promiscuous mode enabled
*** Interface: bridge0: done
*** Default password/login databases ..
*** inetd
*** Done!
FreeBSD/mips (freebsd-wifi-build) (ttyu0)
login: wlan1: CAC timer on channel 52 (5260 MHz) expired; no radar detected
wlan1: ieee80211_new_state_locked: pending CAC -> RUN transition lost
lock order reversal: (sleepable after non-sleepable)
1st 0xc70a3014 ath1_com_lock (ath1_com_lock) @
/root/work/freebsd/head/src/sys/modules/wlan/../../net80211/ieee80211_scan.c:686
2nd 0x8036dff8 user map (user map) @ /root/work/freebsd/head/src/sys/vm/vm_glue.c:168
KDB: stack backtrace:
db_trace_thread+30 (?,?,?,?) ra c836189000000018 sp 0 sz 0
db_trace_self+1c (?,?,?,?) ra c83618a800000018 sp 0 sz 0
8007ad18+34 (?,?,?,?) ra c83618c0000001a0 sp 0 sz 0
kdb_backtrace+44 (?,?,?,?) ra c8361a6000000018 sp 0 sz 0
801704b8+34 (?,?,?,?) ra c8361a7800000020 sp 0 sz 0
witness_checkorder+b0c (?,?,802f97d4,a8) ra c8361a9800000050 sp 0 sz 1
_sx_slock+c0 (?,?,?,?) ra c8361ae800000030 sp 0 sz 0
_vm_map_lock_read+40 (?,?,?,?) ra c8361b1800000018 sp 0 sz 0
useracc+80 (?,?,?,?) ra c8361b3000000028 sp 0 sz 0
802a7dc4+dc (?,?,?,?) ra c8361b5800000040 sp 0 sz 0
trap+e6c (?,?,?,?) ra c8361b98000000b8 sp 0 sz 0
MipsKernGenException+134 (ffff,9,806089b0,0) ra c8361c50000000c8 sp 100000001 sz 1
hostap_newstate+358 (?,?,?,?) ra c8361d1800000038 sp 0 sz 0
ath_newstate+2c0 (?,?,?,?) ra c8361d5000000058 sp 0 sz 0
ieee80211_newstate_cb+20c (?,?,?,?) ra c8361da800000040 sp 0 sz 0
801630c8+e8 (?,?,?,?) ra c8361de800000038 sp 0 sz 0
taskqueue_thread_loop+8c (?,?,?,?) ra c8361e2000000038 sp 0 sz 0
fork_exit+b0 (?,?,?,?) ra c8361e5800000028 sp 0 sz 0
fork_trampoline+10 (?,?,?,?) ra c8361e8000000000 sp 0 sz 0
pid 0
Trap cause = 4 (address error (load or I-fetch) - kernel mode)
[ thread pid 0 tid 100043 ]
Stopped at hostap_newstate+0x358: lw v0,0(a0)
db>
--
We will call you Cygnus,
The God of balance you shall be
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
http://en.wikipedia.org/wiki/Posting_style
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b9e5a389e69c587c54ac71e70ae47cfd.squirrel>