Date: Fri, 16 Oct 2020 11:55:47 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 250394] After creating an ethernet bridge the host responds to incoming packets not addressed to itself Message-ID: <bug-250394-227@https.bugs.freebsd.org/bugzilla/>
index | next in thread | raw e-mail
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=250394 Bug ID: 250394 Summary: After creating an ethernet bridge the host responds to incoming packets not addressed to itself Product: Base System Version: 12.1-RELEASE Hardware: amd64 OS: Any Status: New Severity: Affects Some People Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: be@0x20.net Preface: the host where this issue was detected is connected to a buggy switch. The switch sends unicast packets addressed to foreign MACs to this host. As soon as a bridge is created with the host's uplink interface as a member, the host responds to packets addressed to foreign MAC/IP address combinations. In this example 0c:c4:7a:9a:9a:ac is a foreign MAC address and 46.251.251.225 is a foreign IP address while 70:85:c2:39:08:19 and 46.251.251.47 are local to the host. tcpdump output: 12:07:49.256533 00:24:dc:41:9f:c0 > 0c:c4:7a:9a:9a:ac, ethertype IPv4 (0x0800), length 74: 144.76.249.205.56701 > 46.251.251.225.33452: UDP, length 32 12:07:49.256612 70:85:c2:39:08:19 > 00:24:dc:41:9f:c0, ethertype IPv4 (0x0800), length 102: 46.251.251.47 > 144.76.249.205: ICMP 46.251.251.225 udp port 33452 unreachable, length 68 On the other hand as soon as the bridge is detroyed, the host stops responding to foreign packets. It also does not respond to foreign packets without the bridge but with enabled promisc. mode on the uplink interface. This is the interface configuration while showing the weird behaviour: # ifconfig re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> ether 70:85:c2:39:08:19 inet 46.251.251.47 netmask 0xffffff00 broadcast 46.251.251.255 inet 46.251.251.54 netmask 0xffffffff broadcast 46.251.251.54 inet 46.251.251.57 netmask 0xffffffff broadcast 46.251.251.57 inet 192.168.10.4 netmask 0xffffff00 broadcast 192.168.10.255 inet 46.251.251.55 netmask 0xffffffff broadcast 46.251.251.55 inet 46.251.251.56 netmask 0xffffffff broadcast 46.251.251.56 inet 127.1.0.2 netmask 0xffffffff broadcast 127.1.0.2 inet6 fe80::7285:c2ff:fe39:819%re0 prefixlen 64 scopeid 0x1 inet6 2a0a:51c0:0:2c::e prefixlen 64 inet6 2a0a:51c0:0:2c::80 prefixlen 128 inet6 2a0a:51c0:0:2c::53 prefixlen 128 media: Ethernet autoselect (1000baseT <full-duplex>) status: active nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 inet 127.1.0.2 netmask 0xffffffff groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33160 groups: pflog tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 description: vmnet-discourse.nomadbsd.org-0-public options=80000<LINKSTATE> ether 00:bd:c7:24:20:00 groups: tap vm-port media: Ethernet autoselect status: active nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Opened by PID 39345 vm-public: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether d2:f1:1a:d8:37:b0 id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 1 priority 128 path cost 20000 groups: bridge vm-switch viid-4c918@ nd6 options=1<PERFORMNUD> -- You are receiving this mail because: You are the assignee for the bug.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-250394-227>