Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 01 Feb 2026 01:04:10 +0000
From:      bugzilla-noreply@freebsd.org
To:        wireless@FreeBSD.org
Subject:   [Bug 292847] RTL8852AE panics when bringing the wlan iface up
Message-ID:  <bug-292847-21060@https.bugs.freebsd.org/bugzilla/>

index | next in thread | raw e-mail

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=292847

            Bug ID: 292847
           Summary: RTL8852AE panics when bringing the wlan iface up
           Product: Base System
           Version: 15.0-RELEASE
          Hardware: arm64
                OS: Any
            Status: New
          Severity: Affects Some People
          Priority: ---
         Component: wireless
          Assignee: wireless@FreeBSD.org
          Reporter: c2ny@proton.me

Created attachment 267647
  --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=267647&action=edit
panic dump

Panic dump attached

root@t14s:~ # freebsd-version -ku
15.0-RELEASE-p2
15.0-RELEASE-p2

root@t14s:~ # uname -a
FreeBSD t14s 15.0-RELEASE-p2 FreeBSD 15.0-RELEASE-p2
releng/15.0-n281005-5fb0f8e9e61d GENERIC amd64

root@t14s:~ # pciconf -lv | grep -Ei -A4 "rtw|rtl"
    device     = 'RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
Controller'
    class      = network
    subclass   = ethernet
none2@pci0:2:0:1:       class=0x070002 rev=0x0e hdr=0x00 vendor=0x10ec
device=0x816a subvendor=0x17aa subdevice=0x5082
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111xP UART'
    class      = simple comms
    subclass   = UART
none3@pci0:2:0:2:       class=0x070002 rev=0x0e hdr=0x00 vendor=0x10ec
device=0x816b subvendor=0x17aa subdevice=0x5082
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111xP UART'
    class      = simple comms
    subclass   = UART
none4@pci0:2:0:3:       class=0x0c0701 rev=0x0e hdr=0x00 vendor=0x10ec
device=0x816c subvendor=0x17aa subdevice=0x5082
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111xP IPMI interface'
    class      = serial bus
    subclass   = IPMI
ehci0@pci0:2:0:4:       class=0x0c0320 rev=0x0e hdr=0x00 vendor=0x10ec
device=0x816d subvendor=0x17aa subdevice=0x5082
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL811x EHCI host controller'
    class      = serial bus
    subclass   = USB
rtw890@pci0:3:0:0:      class=0x028000 rev=0x00 hdr=0x00 vendor=0x10ec
device=0x8852 subvendor=0x17aa subdevice=0x4852
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8852AE 802.11ax PCIe Wireless Network Adapter'
    class      = network
rtsx0@pci0:4:0:0:       class=0xff0000 rev=0x01 hdr=0x00 vendor=0x10ec
device=0x522a subvendor=0x17aa subdevice=0x5082
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTS522A PCI Express Card Reader'

root@t14s:~ # kldstat 
Id Refs Address                Size Name 
 1  114 0xffffffff80200000  1f4daa0 kernel 
 2    1 0xffffffff83200000   6ddad0 amdgpu.ko 
 3    2 0xffffffff838de000    8a190 drm.ko 
 4    1 0xffffffff831f9000     22b8 iic.ko 
 5    2 0xffffffff83969000     4120 linuxkpi_video.ko 
 6    3 0xffffffff8396e000     7358 dmabuf.ko 
 7    3 0xffffffff831fc000     3378 lindebugfs.ko 
 8    1 0xffffffff83976000     b480 ttm.ko 
 9    1 0xffffffff83982000    312e0 amdgpu_renoir_asd_bin.ko 
10    1 0xffffffff839b4000     c4e0 amdgpu_renoir_ta_bin.ko 
11    1 0xffffffff839c1000    1fbe8 amdgpu_renoir_dmcub_bin.ko 
12    1 0xffffffff839e1000     7560 amdgpu_renoir_pfp_bin.ko 
13    1 0xffffffff839e9000     6560 amdgpu_renoir_me_bin.ko 
14    1 0xffffffff839f0000     4560 amdgpu_renoir_ce_bin.ko 
15    1 0xffffffff839f5000     bcd8 amdgpu_renoir_rlc_bin.ko 
16    1 0xffffffff83a01000    43800 amdgpu_renoir_mec_bin.ko 
17    1 0xffffffff83a45000     64e0 amdgpu_renoir_sdma_bin.ko 
18    1 0xffffffff83a4c000    64aa0 amdgpu_renoir_vcn_bin.ko 
19    1 0xffffffff83ab1000     3390 acpi_wmi.ko 
20    1 0xffffffff83c00000   2fd4a8 if_rtw89.ko 
21    1 0xffffffff83ab5000     6210 ig4.ko 
22    1 0xffffffff83abc000     3220 intpm.ko 
23    1 0xffffffff83ac0000     2178 smbus.ko 
24    1 0xffffffff83ac3000     d200 rtsx.ko 
25    1 0xffffffff83ad1000     58c0 ng_ubt.ko 
26    4 0xffffffff83ad7000     abb8 netgraph.ko 
27    3 0xffffffff83ae2000     a330 ng_hci.ko 
28    2 0xffffffff83aed000     2670 ng_bluetooth.ko 
29    1 0xffffffff83af0000     34c0 if_axge.ko 
30    1 0xffffffff83af4000     31d0 uether.ko 
31    1 0xffffffff83af8000     2a80 mac_ntpd.ko 
32    1 0xffffffff83afb000     2630 nlsysevent.ko 

root@t14s:~ # ifconfig -a
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 38:f3:ab:d2:2f:f9
        media: Ethernet autoselect (none)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 9c:69:d3:40:6e:55
        inet 192.168.4.67 netmask 0xfffffc00 broadcast 192.168.7.255
        inet6 fe80::9e69:d3ff:fe40:6e55%ue0 prefixlen 64 scopeid 0x3
        inet6 fdab:b4e2:bf62:1:9e69:d3ff:fe40:6e55 prefixlen 64 autoconf pltime
604800 vltime 2592000
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
root@t14s:~ # ifconfig wlan0 create wlandev rtw890
root@t14s:~ # ifconfig -a
re0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
       
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 38:f3:ab:d2:2f:f9
        media: Ethernet autoselect (none)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 1500
        options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
        ether 9c:69:d3:40:6e:55
        inet 192.168.4.67 netmask 0xfffffc00 broadcast 192.168.7.255
        inet6 fe80::9e69:d3ff:fe40:6e55%ue0 prefixlen 64 scopeid 0x3
        inet6 fdab:b4e2:bf62:1:9e69:d3ff:fe40:6e55 prefixlen 64 autoconf pltime
604800 vltime 2592000
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=0
        ether 14:5a:fc:2c:8a:99
        groups: wlan
        ssid "" channel 1 (2412 MHz 11b)
        regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7
        scanvalid 60 wme bintval 0
        parent interface: rtw890
        media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>

root@t14s:~ # dmesg | grep -i rtw
rtw890: <rtw89_8852ae> port 0x2000-0x20ff mem 0xfd600000-0xfd6fffff at device
0.0 on pci3
rtw89/rtw8852a_fw.bin: could not load firmware image, error 8
Trying to load binary firmware from /boot/firmware/rtw89/rtw8852a_fw.bin
firmware: '/boot/firmware/rtw89/rtw8852a_fw.bin' version 0: 1428272 bytes
loaded at 0xfffffe0138dc2000
rtw89/rtw8852a_fw.bin: Loaded binary firmware using
/boot/firmware/rtw89/rtw8852a_fw.bin
rtw890: successfully loaded firmware image 'rtw89/rtw8852a_fw.bin'
rtw890: loaded firmware rtw89/rtw8852a_fw.bin
rtw890: Firmware version 0.13.36.2 (52acc807), cmd version 0, type 1
rtw890: Firmware version 0.13.36.2 (52acc807), cmd version 0, type 3
rtw890: chip rfe_type is 1
rtw890: attempting to allocate 1 MSI vectors (1 supported)
rtw890: using IRQ 76 for MSI
rtw890: netdev_features 0
rtw890: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
rtw890: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rtw890: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
rtw890: rfkill hardware state changed to enable

-- 
You are receiving this mail because:
You are the assignee for the bug.

home | help

Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-292847-21060>