Date: Wed, 9 Nov 2016 16:54:56 +0100 From: Mattia Rossi <mattia.rossi.mailinglists@gmail.com> To: freebsd-arm <freebsd-arm@freebsd.org> Subject: Allwinner H3 (orangepi-plus-2) SD card issue - kernel related Message-ID: <e9472f24-2629-77b2-cbe9-889138257c97@gmail.com>
next in thread | raw e-mail | index | archive | help
Hi all,
Finally had the guts to rebuild world, kernel (r308464M) and with that
the .dtb file, and trying to boot using the generated .dtb file.
The good news is: The system boots!
The bad news:
a) It loses a lot of time searching for the SD card partitions (or
whatever it does here), then it continues in the boot process. What's wrong?
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Allwinner EHCI root HUB> at usbus0
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Allwinner EHCI root HUB> at usbus1
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 16GB <SDHC SL16G 3.0 SN DAF66CDA MFG 09/2015 by 3 PT> at mmc0
50.0MHz/4bit/65535-block
a10_mmc1: error rint: 0x00000100
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x05e3 USB Storage> at usbus1
umass0 on uhub1
umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/0.09, addr 2> on
usbus1
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:0:0: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <USB TO I DE/SATA Device 0009> Fixed Direct Access SCSI device
da0: Serial Number 000000000033
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
a10_mmc1: controller timeout
mmc1: No compatible cards found on bus
a10_mmc2: error rint: 0x00000100
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
a10_mmc2: controller timeout
mmc2: No compatible cards found on bus
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/mmcsd0s2 [rw]...
b) No Ethernet Device! What do I have to add (to the .dts i guess) to
get that back?
ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Appreciate any help,
Mat
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e9472f24-2629-77b2-cbe9-889138257c97>