Date: Wed, 10 Aug 2005 09:08:28 -0400 From: Alexander Chamandy <bsdfreak@gmail.com> To: current@freebsd.org Subject: FreeBSD/amd64 phobos.envescent.net 6.0-BETA2 - Possible SiI 3512 SATA-150 lockup/freezing bug Message-ID: <f420b2a105081006085e8f7279@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I'm seeing messages like this on bootup: ata2: FAILURE - oversized DMA
transfer attempt 8704 > 7680
I know FreeBSD has some issues with the SiI SATA controllers so I'm
not sure if this is already known, but essentially under high load the
machine either hardlocks or simply reboots. I've tried custom and
generic kernels as well as reinstalling to no avail. This system,
like the subject says, is running FreeBSD/amd64 6.0-BETA2. Should I
disable DMA? Is there a workaround? Dmesg from GENERIC kernel is as
follows:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA2 #0: Tue Aug 2 22:37:52 UTC 2005
root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2080.20-MHz K8-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0xf48 Stepping =3D 8
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory =3D 2147418112 (2047 MB)
avail memory =3D 2062671872 (1967 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK1> irq 3 on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNK4> on acpi0
pci_link4: <ACPI PCI Link LNK5> irq 7 on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 4 on acpi0
pci_link6: <ACPI PCI Link LUBB> irq 4 on acpi0
pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0
pci_link8: <ACPI PCI Link LAPU> on acpi0
pci_link9: <ACPI PCI Link LACI> on acpi0
pci_link10: <ACPI PCI Link LMCI> on acpi0
pci_link11: <ACPI PCI Link LSMB> irq 5 on acpi0
pci_link12: <ACPI PCI Link LUB2> irq 4 on acpi0
pci_link13: <ACPI PCI Link LFIR> on acpi0
pci_link14: <ACPI PCI Link L3CM> on acpi0
pci_link15: <ACPI PCI Link LIDE> on acpi0
pci_link16: <ACPI PCI Link LSID> on acpi0
pci_link17: <ACPI PCI Link APC1> irq 16 on acpi0
pci_link18: <ACPI PCI Link APC2> irq 17 on acpi0
pci_link19: <ACPI PCI Link APC3> irq 18 on acpi0
pci_link20: <ACPI PCI Link APC4> irq 19 on acpi0
pci_link21: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link22: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link23: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCS> irq 23 on acpi0
pci_link29: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link30: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link31: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link32: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link33: <ACPI PCI Link APSI> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link22: Unable to choose an IRQ
pci_link23: Unable to choose an IRQ
pci_link29: Unable to choose an IRQ
pci_link24: Unable to choose an IRQ
agp0: <NVIDIA nForce3 AGP Controller> mem 0xe0000000-0xe7ffffff at
device 0.0 on pci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce3 USB Controller> mem 0xfc002000-0xfc002fff irq
20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <nVidia nForce3 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <nVidia nForce3 USB Controller> mem 0xfc003000-0xfc003fff irq
21 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <nVidia nForce3 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc004000-0xfc0040ff
irq 22 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3: vendor 0x0543 product 0x1167, class 9/0, rev 2.00/ff.ff, addr 2
uhub3: multiple transaction translators
uhub3: 4 ports with 4 removable, self powered
ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 3, iclass 7/1
ulpt0: using bi-directional mode
nve0: <NVIDIA nForce MCP3 Networking Adapter> port 0xd000-0xd007 mem
0xfc000000-0xfc000fff irq 20 at device 5.0 on pci0
nve0: Ethernet address 00:0d:61:14:6f:39
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: Ethernet address: 00:0d:61:14:6f:39
nve0: [GIANT-LOCKED]
atapci0: <nVidia nForce3 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, audio> at device 8.0 (no driver attached)
pci1: <input device> at device 8.1 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem
0xfb005000-0xfb0057ff,0xfb000000-0xfb003fff irq 17 at device 8.2 on
pci1
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:00:21:04:e6:cc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:04:e6:cc
fwe0: Ethernet address: 02:02:3c:04:e6:cc
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xa800-0xa8ff mem
0xfb004000-0xfb004fff irq 18 at device 10.0 on pci1
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
atapci1: <SiI 3512 SATA150 controller> port
0xac00-0xac07,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc0f
mem 0xfb006000-0xfb0061ff irq 17 at device 13.0 on pci1
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
pci2: <display> at device 0.1 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xccfff,0xd0000-0xd7fff,0xd8000-0xdc7ff,0xdd000-0xe27ff on
isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
Timecounter "TSC" frequency 2080199228 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: DVDR <TEAC DV-W516GA/C4S2> at ata1-slave UDMA33
ad4: 286188MB <Maxtor 6B300S0 BANC1B10> at ata2-master SATA150
ata2: FAILURE - oversized DMA transfer attempt 8704 > 7680
ad4: setting up DMA failed
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST118273LW 6246> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s2a
WARNING: / was not properly dismounted
pcm0: <Creative Audigy (EMU10K2)> port 0xa000-0xa01f irq 16 at device
8.0 on pci1
pcm0: <TriTech TR28602 AC97 Codec>
nve0: link state changed to DOWN
nve0: link state changed to UP
nve0: promiscuous mode enabled
nve0: promiscuous mode disabled
--=20
Best wishes,
Alexander G. Chamandy
Webmaster
www.bsdfreak.org
Your Source For BSD News!
Hosted by Envescent, LLC
www.envescent.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f420b2a105081006085e8f7279>