Skip site navigation (1)Skip section navigation (2) 
Date:      Sat, 3 Jan 2009 01:21:13 +0100
From:      "Stefan Miklosovic" <miklosovic.freebsd@gmail.com>
To:        freebsd-questions@freebsd.org
Subject:   two ethernet cards
Message-ID:  <f99a79ec0901021621i7024dc3dxc0c23ea173de1482@mail.gmail.com>
next in thread | raw e-mail | index | archive | help 
hi

i have two ethernet cards on my box

uname -a
FreeBSD dexter 7.0-RELEASE Freebsd 7.0-RELEASE #5: Fri Jan   2 21:25:21 CET
2009  root@dexter:/usr/obj/usr/src/sys/DEXTER   i386

ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=8<VLAN_MTU>
    ether XX:XX:XX:XX:XX:XX
    inet 192.168.0.177 netmask 0xffffff00 broadcast 192.168.0.255
    media: Ethernet 100baseTX
    status: active
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=b<RXCSUM,TXCSUM,VLAN_MTU>
    ether XX:XX:XX:XX:XX:XX
    inet 192.168.0.176 netmask 0xffffff00 broadcast 192.168.0.255
    media: Ethernet 100baseTX (100baseTX <full-duplex>)
    status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000

when I want to ping sk0 from eth0 on linux box, ping is ok, but this message
appears to me in freebsd console

Jan 3 01:07:39 dexter kernel: arp: 192.168.0.2 is on rl0 but got reply from
XX:XX:XX:XX:XX:XX on sk0

linux command
ping -I eth0 192.168.0.176

linux ifconfig

eth0      Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX
          inet addr:192.168.0.2  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::20a:e4ff:fef3:abb6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3 errors:0 dropped:0 overruns:0 frame:0
          TX packets:88 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:180 (180.0 B)  TX bytes:11542 (11.2 KB)
          Interrupt:22 Base address:0x3000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:416 errors:0 dropped:0 overruns:0 frame:0
          TX packets:416 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:25130 (24.5 KB)  TX bytes:25130 (24.5 KB)

wlan0     Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX
          inet addr:192.168.0.173  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::214:a4ff:fe79:3cbc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:30030 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25399 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:32882410 (31.3 MB)  TX bytes:3522346 (3.3 MB)

mac adres from eth0 on linux machine is same as from the error output on bsd



thank you a lot

stewe

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f99a79ec0901021621i7024dc3dxc0c23ea173de1482>