Date: Wed, 19 Oct 2016 09:47:38 +0300 From: "Andriy Voskoboinyk" <s3erios@gmail.com> To: freebsd-wireless@freebsd.org, "kbenjamin Coplon" <mr.gaga@gmail.com> Subject: Re: N-only access point on FreeBSD 11 Message-ID: <op.ypkihockiew4ia@localhost> In-Reply-To: <CAGy7piigdo=XRxfuPd5G7dnhJi4QwE6-FmKUQH55BU5OaGTyVw@mail.gmail.com> References: <CAGy7piigdo=XRxfuPd5G7dnhJi4QwE6-FmKUQH55BU5OaGTyVw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Wed, 19 Oct 2016 06:13:34 +0300 =D0=B1=D1=83=D0=BB=D0=BE =D0=BD=D0=B0=D0= =BF=D0=B8=D1=81=D0=B0=D0=BD=D0=BE kbenjamin Coplon = <mr.gaga@gmail.com>: puren? > Hi, I'm trying to configure an ATH3980 as a wireless access point. > I would like it to operate in N-only mode, but for some reason I can o= nly > make it work with GN. > > Any advice as to how I can make this work would be very helpful. > Thank You > Benjamin Sauerhaft Coplon > > > Here is the relevant section of /etc/rc.conf > > #Wireless > wlans_ath0=3D"wlan0" > create_args_wlan0=3D"wlanmode hostap" > hostapd_enable=3D"YES" > ifconfig_wlan0=3D"inet 10.0.0.1 netmask 255.255.255.0 ssid ishmael mod= e = > 11n" > > > and here is the output of "ifconfig wlan0" > wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 m= tu = > 1500 > ether 7c:c3:a1:b3:b3:06 > nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEEwlan0: > flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500= > ether 7c:c3:a1:b3:b3:06 > nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng = > <hostap> > status: running > ssid ishmael channel 1 (2412 MHz 11g ht/20) bssid = > 7c:c3:a1:b3:b3:06 > regdomain 100 indoor ecm authmode WPA2/802.11i privacy MIXED > deftxkey 2 AES-CCM 2:128-bit txpower 20 scanvalid 60 protmode = CTS > ampdulimit 64k ampdudensity 8 shortgi wme burst dtimperiod 1 -= dfs > groups: wlan > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to = > "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.ypkihockiew4ia>