Date: Mon, 21 Jan 2019 00:33:42 +0200 From: "Andriy Voskoboinyk" <avos@freebsd.org> To: "Hans-Christian Esperer" <hc@hcesperer.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Problem with Intel Wireless WiFi Link 4965 on APU2, FreeBSD 12 Message-ID: <op.zvxsyglx4dikkl@localhost> In-Reply-To: <20190120195646.GP5353@hcesperer.org> References: <20190120195646.GP5353@hcesperer.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Sun, 20 Jan 2019 21:56:46 +0200 було написано Hans-Christian Esperer <hc@hcesperer.org>: Hi, Is it installed reliably? What 'pciconf -lvbce' prints about this device? > Hi all, > > I'm running an APU-2 SoC with FreeBSD 12 stable and an Intel Wireless > WiFi Link > 4965 micro PCI card. > > /boot/loader.conf has the following lines: > if_iwn_load="YES" > iwn4965fw_load="YES" > > When creating and upping the wifi device with ifconfig, I'm getting the > following messags in dmesg: > iwn0: <Intel Wireless WiFi Link 4965> mem 0xfe500000-0xfe501fff at > device 0.0 on pci1 > [...] > iwn0: timeout reading ROM at 0x48 > [...] > iwn0: timeout reading ROM at 0xe9 > iwn0: iwn_read_firmware: ucode rev=0xe43d0218 > iwn0: iwn_send_rxon: could not set TX power, error 22 > iwn0: iwn_config: could not send RXON > iwn0: iwn_init_locked: could not configure device, error 22 > > The adapter doesn't work. Switching channels doesn't work: > # ifconfig wlan0 channel 6 > ifconfig: unknown/undefined channel number 6 flags 0x0 > > Scanning for access points doesn't work. > > Any ideas/hints? > > Thanks, > HC > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to > "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.zvxsyglx4dikkl>