Date: Tue, 27 Jan 2004 11:37:14 +0200 From: Matti Saarinen <mjs@cc.tut.fi> To: freebsd-stable@freebsd.org Subject: RELENG_4: Problems with mpt driver Message-ID: <qzu7jzdd96d.fsf@butler.cc.tut.fi>
next in thread | raw e-mail | index | archive | help
I have IBM x345 which has integrated LSI 1030 raid controller. I don't
know if the problem is in the driver or do I have malfunctioning
hardware. Many times but not all, when the system boots the console
output contains almost denumerable number of the following lines:
mpt0: EvtLogData: Event Data:mpt0: 05020012mpt0:
mpt0: EvtLogData: IOCLogInfo: 0x110a0000
mpt0: EvtLogData: Event Data:mpt0: 05020012mpt0:
mpt0: EvtLogData: IOCLogInfo: 0x110a0000
At the same time the activity leds of the disks da9 and da10 are
contantly lit.
Here is the dmesg of the boot process without the complaints of the
mpt0. The current dmesg is useless beacuse it only contains
the mpt0 lines.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #2: Thu Jan 22 09:00:37 EET 2004
root@news.cc.tut.fi:/usr/obj/usr/src/sys/NEWS
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 4093554688 (3997612K bytes)
avail memory = 3986198528 (3892772K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 14, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 13, version: 0x000f0011, at 0xfec01000
io2 (APIC): apic id: 12, version: 0x000f0011, at 0xfec02000
Preloaded elf kernel "kernel" at 0xc0562000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 10 -> irq 2
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 6.0 irq 2
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x700-0x70f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 3 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 4 -> irq 5
pci2: <PCI bus> on pcib2
ahd0: <Adaptec 29320LP Ultra320 SCSI adapter> port 0x2600-0x26ff,0x2500-0x25ff mem 0xfbffe000-0xfbffffff irq 5 at device 3.0 on pci2
aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci4: <PCI bus> on pcib4
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci5: <PCI bus> on pcib5
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 13 -> irq 7
IOAPIC #1 intpin 14 -> irq 9
pci6: <PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x2700-0x273f mem 0xf9fe0000-0xf9ffffff irq 7 at device 8.0 on pci6
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x2740-0x277f mem 0xf9fc0000-0xf9fdffff irq 9 at device 8.1 on pci6
em1: Speed:N/A Duplex:N/A
pcib8: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 11 -> irq 10
IOAPIC #1 intpin 12 -> irq 11
pci8: <PCI bus> on pcib8
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2800-0x28ff mem 0xf7fe0000-0xf7feffff,0xf7ff0000-0xf7ffffff irq 10 at device 7.0 on pci8
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2900-0x29ff mem 0xf7fc0000-0xf7fcffff,0xf7fd0000-0xf7fdffff irq 11 at device 7.1 on pci8
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcd7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
acd0: CDROM <LG CD-ROM CRN-8245B> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
pass7 at ahd0 bus 0 target 15 lun 0
pass7: <IBM EXP400 S320 D110> Fixed Processor SCSI-3 device
pass7: 3.300MB/s transfers
pass13 at mpt0 bus 0 target 8 lun 0
pass13: <IBM 32P0032a S320 1 1> Fixed Processor SCSI-2 device
pass13: 3.300MB/s transfers
da7 at mpt0 bus 0 target 0 lun 0
da7: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device
da7: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da7: 70006MB (143372288 512 byte sectors: 255H 63S/T 8924C)
da3 at ahd0 bus 0 target 3 lun 0
da3: <IBM-ESXS MAS3735NC FN B905> Fixed Direct Access SCSI-3 device
da3: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da3: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da6 at ahd0 bus 0 target 6 lun 0
da6: <IBM-ESXS MAS3735NC FN B905> Fixed Direct Access SCSI-3 device
da6: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da6: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da4 at ahd0 bus 0 target 4 lun 0
da4: <IBM-ESXS MAS3735NC FN B905> Fixed Direct Access SCSI-3 device
da4: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da4: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da9 at mpt0 bus 0 target 3 lun 0
da9: <IBM-ESXS MAS3735NC FN B905> Fixed Direct Access SCSI-3 device
da9: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da9: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da11 at mpt0 bus 0 target 5 lun 0
da11: <IBM-ESXS ST373453LC FN B85A> Fixed Direct Access SCSI-3 device
da11: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da11: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da10 at mpt0 bus 0 target 4 lun 0
da10: <IBM-ESXS ST373453LC FN B85A> Fixed Direct Access SCSI-3 device
da10: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da10: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da8 at mpt0 bus 0 target 2 lun 0
da8: <IBM-ESXS ST373453LC FN B85A> Fixed Direct Access SCSI-3 device
da8: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da8: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da2 at ahd0 bus 0 target 2 lun 0
da2: <IBM-ESXS ST373453LC FN B85A> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <IBM-ESXS ST373453LC FN B85A> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da0 at ahd0 bus 0 target 0 lun 0
da0: <IBM-ESXS MAS3735NC FN B905> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da5 at ahd0 bus 0 target 5 lun 0
da5: <IBM-ESXS ST373453LC FN B85A> Fixed Direct Access SCSI-3 device
da5: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da5: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
Mounting root from ufs:/dev/da7s1a
em0: Link is up 100 Mbps Full Duplex
Cheers,
--
- Matti -
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?qzu7jzdd96d.fsf>