Date: 23 Mar 1998 14:43:25 +0100 From: Peter Simons <simons@rhein.de> To: freebsd-isdn@FreeBSD.ORG Subject: Problems on NetBSD Message-ID: <x7emztv7ya.fsf@petium.rhein.de>
next in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- Hi, I have installed the latest alpha release of i4b (i4b-00.50-alpha-130398.tgz) and tried it on my NetBSD/i386 1.3 box, unfortunately without success. The card I am using is a Teles S0.16 card, without Plug&Play. I have installed software following the documentation, and booted the machine with the new kernel: | isic0 at isa0 port 0xd80-0xd87 iomem 0xd0000-0xd0fff irq 10: | Teles S0/16, Creatix ISDN S0-16 or Niccy 1016 | isic0: ISAC 2085 Version V2.3 (B3) (IOM-1) | isic0: HSCX 82525 or 21525 Version 2.1 | biomask 8040 netmask c440 ttymask c4c2 | i4b: ISDN call control device attached | i4btrc: 1 ISDN trace device(s) attached | i4bctl: ISDN system control port attached | i4brbch: 4 raw B channel access device(s) attached | i4btel: 2 ISDN telephony interface device(s) attached | i4bipr: 2 IP over raw HDLC ISDN device(s) attached | i4bisppp: 2 ISDN SyncPPP device(s) attached Then I called isdntest and got the following result: | root@petium:/usr/home/simons# isdntest -i my_number -o my_number | isdntest: accepting calls from telephone number [my_number] | isdntest: calling out telephone number [my_number] | isdntest: got cdid 3 from kernel | isdntest: calling out to telephone number [my_number] from then on, I see lots of messages from the kernel and nothing else happens: | i4b-L2-i4b_tei_assign: tx TEI ID_Request | i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 | [...] | i4b-L2-i4b_tei_assign: tx TEI ID_Request | i4b-L3-T303_timeout: cr = 13 | i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, | event = EV_T303EXP - T303 timeout! | i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 | i4b-L2-i4b_tei_assign: tx TEI ID_Request | [...] | i4b-L2-i4b_tei_assign: tx TEI ID_Request | i4b-L2-F_ILL: FSM function F_ILL executing | i4b-L2-i4b_next_l2state: FSM illegal state, state = ST_EST_AW_TEI, | event = EV_DLESTRQ! | i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 | i4b-L2-i4b_tei_assign: tx TEI ID_Request | i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 | i4b-L2-i4b_tei_assign: tx TEI ID_Request | i4b-L3-T303_timeout: cr = 20 | i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, | event = EV_T303EXP - T303 timeout! | [...] Does anyone have an idea what is going wrong and what I could try? Just for the record, the isic0 device is configured as follows: | options TEL_S0_16 | isic0 at isa? port 0xd80 iomem 0xd0000 irq 10 The card is a PCI card, so I assume the interrupts are not fixed, but are assigned by the BIOS? Anyway... any comments or ideas are appreciated. -peter -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: latin1 iQCVAwUBNRZm/A9HL1s0103BAQE7sgQAvgA30+jGG9YGK8ocdQ7Xmgi0zBCiWqre N8RC6PL3BAVCaoNelMAqx8kYvXTixLfX2nslfD0LwAoH6eAul2N/51ipZ1GkTId8 VNkTgZmBGHt0E2hEjdkLIA9NlW8aL/oU0yGrmJUInjBIp38HAbiBcGePfCXyQU5u wnyiL4tFfRQ= =F/+a -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?x7emztv7ya.fsf>