Date: Wed, 31 Mar 2010 23:39:11 -0700 From: Jack Vogel <jfvogel@gmail.com> To: David Ehrmann <ehrmann@gmail.com> Cc: freebsd-current@freebsd.org Subject: Re: Intel H55 and em0 Message-ID: <y2y2a41acea1003312339ndffdd6dfl22f0e9f2d7b9961d@mail.gmail.com> In-Reply-To: <4BB43D4B.7060507@gmail.com> References: <4BB43D4B.7060507@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The device subfamily on those motherboards is called PCH, and its only in the em driver as of last December, The CVS delta of if_em is 1.27. You can either update to STABLE/8 or CURRENT. If you wish to just pull the e1000 driver directory it should work fine in 8.0 RELEASE also. Cheers, Jack On Wed, Mar 31, 2010 at 11:29 PM, David Ehrmann <ehrmann@gmail.com> wrote: > I recently picked up a H55-based motherboard, and the ethernet interface > isn't autodetected. dmesg lists it as the following: > > pci0: <network, ethernet> at device 25.0 (no driver attached) > > And pciconf lists this: > > none1@pci0:0:25:0: class=0x020000 card=0x00008086 chip=0x10ef8086 > rev=0x06 hdr=0x00 > vendor = 'Intel Corporation' > class = network > subclass = ethernet > > > I'm actually not sure it's an em device, but it's definitely gigabit, and > googling suggests that others have recently run into the same issue. > > Since I'll probably have to recompile, is this currently working in recent > builds of 8.0? This was just a vanilla 8.0 release image. Would some > simple change tell the driver to recognize this card? > > Thanks in advance. > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?y2y2a41acea1003312339ndffdd6dfl22f0e9f2d7b9961d>