Date: Sat, 16 Feb 2002 11:42:38 +0000 From: Geoff Buckingham <geoffb@chuggalug.clues.com> To: mobile@freebsd.org Subject: TI 1410PGE watchdog timeouts and system hangs Message-ID: <20020216114238.A43640@chuggalug.clues.com>
next in thread | raw e-mail | index | archive | help
I recently aquired two ZoomAir 11mbps 'internal pci card for wireless
networking'. I am able to use one of these in my laptop with no problems.
(having removed pccard frpm pci-cardbus bridge supplied)
However the one I have been trying to use in the PCI adapter has yet to work.
I stated out with a 4.4 RC-2 machine which appeared to work but produced
a watchdog timeout when I tried to use wi0.
Now having upgraded to 4.5-stable I still see the watdog timout, but the system
hangs when I try to utilise the sis0 interface.
This is repeatable, ifconfig sis0 in sngle user mode returns the expected
results and a prompt but at this point the system is 'hung' and unresponsive.
This obviosly means the machine hangs before going multi user.
Removing the IT/Zoom PCI cardbus bridge restores the machine to functionality.
I think I have exhausted all possible combinination of the hw.pcic settings
in loader.conf
Does anybody have any suggestions how to proceed? The following may help:
chip0@pci0:0:0: class=0x060000 card=0x00011400 chip=0x00011400 rev=0x02 hdr=0x00
vendor = 'ARTX Inc'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000050 chip=0x00021400 rev=0x02 hdr=0x01
vendor = 'ARTX Inc'
class = bridge
subclass = PCI-PCI
none0@pci0:2:0: class=0x030000 card=0x00011400 chip=0x00041400 rev=0x02 hdr=0x00
vendor = 'ARTX Inc'
class = display
subclass = VGA
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x153310b9 rev=0xc3 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M1533 Aladdin IV ISA Bridge'
class = bridge
subclass = PCI-ISA
sis0@pci0:10:0: class=0x020000 card=0x09001039 chip=0x09001039 rev=0x02 hdr=0x00
vendor = 'Silicon Integrated Systems (SiS)'
device = 'SiS900 Fast Ethernet/Home Networking Ctrlr'
class = network
subclass = ethernet
pcic0@pci0:14:0: class=0x060700 card=0x00000000 chip=0xac50104c rev=0x01 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1410 PC card cardBus Controller'
class = bridge
subclass = PCI-CardBus
ahc0@pci0:16:0: class=0x010000 card=0x00000000 chip=0x61789004 rev=0x01 hdr=0x00
vendor = 'Adaptec Inc'
device = 'AIC-7861 AHA-2940AU SCSI Controller'
class = mass storage
subclass = SCSI
ohci0@pci0:19:0: class=0x0c0310 card=0x00000000 chip=0x523710b9 rev=0x03 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M5237 USB Host Controller'
class = serial bus
subclass = USB
none1@pci1:0:0: class=0x040000 card=0x00011400 chip=0x00031400 rev=0x02 hdr=0x00
vendor = 'ARTX Inc'
class = multimedia
subclass = video
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Mon Feb 11 18:38:53 GMT 2002
root@router:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 260046848 (253952K bytes)
avail memory = 248537088 (242712K bytes)
Preloaded elf kernel "kernel" at 0xc0496000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f7a00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1400 device=0002)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x1400, dev=0x0003) at 0.0 irq 10
pci0: <VGA-compatible display device> at 2.0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xefef8000-0xefef8fff irq 11 at device 10.0 on pci0
sis0: Ethernet address: 00:e0:06:ec:5b:60
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:14 INTA routed to irq 3
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 3 at device 14.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xefefb000-0xefefbfff irq 10 at device 16.0 on pci0
aic7860: Ultra Single Channel A, SCSI Id=7, 3/255 SCBs
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xefefa000-0xefefafff irq 9 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xd3fff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DORS-32160 S82C> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 64H 32S/T 2063C)
WARNING: / was not properly dismounted
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Mon Feb 11 18:38:53 GMT 2002
root@router:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 501172894 Hz, i8254 clock: 1193269 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 248M bytes
Write Allocate 15-16M bytes: Enable
real memory = 260046848 (253952K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004bd000 - 0x0f7f7fff, 255045632 bytes (62267 pages)
avail memory = 248537088 (242712K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fd9d0
bios32: Entry = 0xfd9e0 (c00fd9e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xda01
pnpbios: Found PnP BIOS data at 0xc00f72e0
pnpbios: Entry = f0000:5e94 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0496000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00011400)
Using $PIR table, 8 entries at 0xc00f7a00
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 147710487 bytes/sec
bzero() bandwidth = 147841513 bytes/sec
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1400, dev=0x0001, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d0000000, size 28
found-> vendor=0x1400, dev=0x0002, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1400, dev=0x0004, revid=0x02
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base eff00000, size 20
map[14]: type 1, range 32, base 0000dc00, size 8
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
class=06-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x0900, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000d400, size 8
map[14]: type 1, range 32, base efef8000, size 12
found-> vendor=0x104c, dev=0xac50, revid=0x01
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x9004, dev=0x6178, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000d800, size 8
map[14]: type 1, range 32, base efefb000, size 12
found-> vendor=0x10b9, dev=0x5237, revid=0x03
class=0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base efefa000, size 12
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1400 device=0002)> at device 1.0 on pci0
found-> vendor=0x1400, dev=0x0003, revid=0x02
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base cf000000, size 23
map[14]: type 1, range 32, base efc00000, size 20
map[18]: type 1, range 32, base c0000000, size 27
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x1400, dev=0x0003) at 0.0 irq 10
pci0: <VGA-compatible display device> (vendor=0x1400, dev=0x0004) at 2.0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xefef8000-0xefef8fff irq 11 at device 10.0 on pci0
sis0: Ethernet address: 00:e0:06:ec:5b:60
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000760, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: sis0 attached
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:14 INTA routed to irq 3
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 3 at device 14.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][pci only]
pcic0: PCI Configuration space:
0x00: 0xac50104c 0x02100003 0x06070001 0x00020000
0x10: 0x44000000 0x020000a0 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x07e00103
0x40: 0x00000000 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449060 0x00000000 0x00000000 0x00000000
0x90: 0x616000c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x0000001e 0x0000001b
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card bus (classic)> on pcic0
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xefefb000-0xefefbfff irq 10 at device 16.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom not present
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 450 instructions downloaded
aic7860: Ultra Single Channel A, SCSI Id=7, 3/255 SCBs
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xefefa000-0xefefafff irq 9 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ex_isa_identify()
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xd3fff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=00 status0=ff status1=ff
ata0: probe allocation failed
ata0 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
ata1 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic1 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic2: not probed (disabled)
sio0: irq maps: 0x43 0x53 0x43 0x43
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x43 0x43 0x43 0x43
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 680240, tty 63001a, net 67081a
bpf: sl0 attached
bpf: faith0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
pcic0: Autodetected 5.0V card
pccard: card inserted, slot 0
pcic0: reset 1 int is 10 stat is 4d
pcic0: reset 2 int is 70 stat is 4d
pcic0: reset 3 int is 70 stat is 6d
(ahc0:A:0:0): Sending SDTR period 19, offset f
(ahc0:A:0:0): Received SDTR period 19, offset f
Filtered to period 19, offset f
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
Creating DISK da0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM DORS-32160 S82C> Fixed Direct Access SCSI-2 device
pass0: Serial Number 5U0F0521
pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DORS-32160 S82C> Fixed Direct Access SCSI-2 device
da0: Serial Number 5U0F0521
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 64H 32S/T 2063C)
da0s1: type 0xa5, start 32, end = 4225023, size 4224992 : OK
start_init: trying /sbin/init
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020216114238.A43640>