Date: Sat, 11 May 2002 07:51:40 -0300 (BRT) From: Paulo Fragoso <paulo@nlink.com.br> To: Fred Clift <fclift@verio.net> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Is wi with problems in RELENG_4_5? Message-ID: <20020511073455.N3535-100000@mirage.nlink.com.br> In-Reply-To: <20020510162213.J49351-100000@vespa.dmz.orem.verio.net>
next in thread | previous in thread | raw e-mail | index | archive | help
We have already found same problem caused by conflicts using an ISA
pccard adpter, but this problema was a bit different we couldn't start the
traffic anyway. Now all works fine by 8 until 30 hours for this problem to
happen.
We've changed pccard for one new Avaya Wireless without firmeware upgrade
and we found same problem.
Our dmesg and pccard log is:
/kernel: FreeBSD 4.5-RELEASE-p4 #0: Mon May 6 10:28:58 BRT 2002
/kernel: Timecounter "i8254" frequency 1193182 Hz
/kernel: CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class
CPU)
/kernel: Origin = "GenuineIntel" Id = 0x660 Stepping = 0
/kernel:
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
/kernel: real memory = 67108864 (65536K bytes)
/kernel: avail memory = 60424192 (59008K bytes)
/kernel: Preloaded elf kernel "kernel" at 0xc046e000.
/kernel: Pentium Pro MTRR support enabled
/kernel: md0: Malloc disk
/kernel: Using $PIR table, 7 entries at 0xc00f8740
/kernel: npx0: <math processor> on motherboard
/kernel: npx0: INT 16 interface
/kernel: pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
/kernel: pci0: <PCI bus> on pcib0
/kernel: pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device
1.0 on pci0
/kernel: pci1: <PCI bus> on pcib1
/kernel: pci1: <SiS 6326 SVGA controller> at 0.0 irq 11
/kernel: isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
/kernel: isa0: <ISA bus> on isab0
/kernel: atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at
device 7.1 on pci0
/kernel: ata0: at 0x1f0 irq 14 on atapci0
/kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
0xef80-0xef9f irq 10 at device 7.2 on pci0
/kernel: usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
/kernel: usb0: USB revision 1.0
/kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
/kernel: uhub0: 2 ports with 2 removable, self powered
/kernel: chip1: <Intel 82371AB Power management controller> port
0x5f00-0x5f0f at device 7.3 on pci0
/kernel: rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem
0xffafff00-0xffafffff irq 11 at device 15.0 on pci0
/kernel: rl0: Ethernet address: 00:e0:4c:e2:14:76
/kernel: miibus0: <MII bus> on rl0
/kernel: rlphy0: <RealTek internal media interface> on miibus0
/kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
/kernel: pci_cfgintr_search: linked (61) to configured irq 11 at 0:15:0
/kernel: pci_cfgintr: 0:16 INTA routed to irq 11
/kernel: pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 16.0 on
pci0
/kernel: pcic0: PCI Memory allocated: 0x44000000
/kernel: pcic0: TI12XX PCI Config Reg: [pwr save][CSC parallel isa irq]
/kernel: pccard0: <PC Card bus (classic)> on pcic0
/kernel: orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
/kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
/kernel: fdc0: FIFO enabled, 8 bytes threshold
/kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
/kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on isa0
/kernel: sc0: <System console> at flags 0x100 on isa0
/kernel: sc0: VGA <16 virtual consoles, flags=0x300>
/kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
/kernel: sio0: type 16550A
/kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
/kernel: ppc0: parallel port not found.
/kernel: DUMMYNET initialized (011031)
/kernel: IP packet filtering initialized, divert enabled, rule-based
forwarding enabled, default to accept, unlimited logging
/kernel: ad0: 4125MB <FUJITSU MPB3043ATU E> [8940/15/63] at ata0-master
UDMA33
/kernel: Mounting root from ufs:/dev/ad0s1a
/kernel: pccard: card inserted, slot 0
/kernel: pccard: card removed, slot 0
/kernel: pccard: card inserted, slot 0
pccardd[50]: Card "Avaya Communication"("Avaya Wireless PC Card") [Version
01.01] [] matched "Avaya Communication" ("Avaya Wireless PC Card")
[(null)] [(null)]
squid[324]: Squid Parent: child process 327 started
/kernel: wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 11 slot 0 on
pccard0
/kernel: wi0: Ethernet address: 00:02:2d:3f:82:77
pccardd[50]: wi0: Avaya Communication (Avaya Wireless PC Card) inserted.
pccard:wi0: Avaya Wireless PC Card inserted
pccardd[50]: pccardd started
Now in this router we are rebooting when it can't reach the wireless
network.
Thanks,
Paulo.
On Fri, 10 May 2002, Fred Clift wrote:
>
> I saw similar symptoms when I had either irq or io-range conflicts with a
> symbol card using the wi driver on my nortel emobility (rebadged Symbol
> la-3141) card. There is a section in the netbsd handbook that tells of
> such conflicts with their version of the wi driver and some suggested ways
> of fixing it.
>
> Honestly, I ended up giving up on my problem. (could get the symbol card
> to work fine by itself, but add a second pcmcia network card ed0 and
> neither would work right). I eventually installed netbsd on the 'wirless
> router'...
>
> Fred
>
>
> On Fri, 10 May 2002, Paulo Fragoso wrote:
>
> > Hi,
> >
> > We have got some wireless routers using lucent cards (WaveLAN/IEEE
> ...
> >
> > /kernel: wi0: xmit failed
> > /kernel: wi0: watchdog timeout
> > /kernel: wi0: init failed
> > /kernel: wi0: failed to allocate 1594 bytes on NIC
> > /kernel: wi0: tx buffer allocation failed
> > /kernel: wi0: failed to allocate 1594 bytes on NIC
> > /kernel: wi0: mgmt. buffer allocation failed
> > /kernel: wi0: timeout in wi_seek to 0/0; last status 4000
> > /kernel: wi0: timeout in wi_seek to 0/44; last status 4044
> >
>
>
>
> --
> Fred Clift - fclift@verio.net -- Remember: If brute
> force doesn't work, you're just not using enough.
>
--
__O
_-\<,_ Why drive when you can bike?
(_)/ (_)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020511073455.N3535-100000>