Date: 09 Apr 2000 20:18:00 +0200 From: maulwurf@subloch.medicusnet.de (Stefan Huerter) To: freebsd-mobile@freebsd.org Subject: Thinkpad 770ED Boot/installation problem Message-ID: <7bZrqV6joRB@subloch.medicusnet.de>
next in thread | raw e-mail | index | archive | help
Guckux
Has anyone experiences with installing FreeBSD on a IBM Thinkpad 770ED?
My machine has following configuration:
TP 770ED, 7.8GB IBM DYLA-HD (78100?), 96MB Ram, iPII-266, Trident-Video.
PCMCIA: PSION DACOM 56Kflex/fax/ISDN
3COM 3C589D
Does not matter, if cards inserted or not.
Experiences:
- Booting with FreeBSD 2.2.7 RELEASE CD-Rom:
hangs while kernel config
Booting with FreeBSD 3.1 RELEASE CD-Rom:
takes a long time to boot
after kernel was booted, no access possible (Device not configured)
the machine hangs with a few fast short "deep" "pieps". Sometimes while in
the kernel configuration kernel menu, sometimes while checking the
devices.
Booting with FreeBSD 3.4PAO Diskettes:
boots pretty good, kernel configuration OK
quitting the configuration menu and booting the kernel:
it hangs with a few fast short "deep" pieps
here are the last output lines from the PAO-Boot:
---------- cut ---------
avail memory = 9147872 (89328K bytes)
Preloaded elf kernel "kernel" at 0xc061b000
Preloaded mfs_root "/mfsroot" at 0xc061b09c
Pentium Pro MTRR support enabled
chip0: <Intel 82443BX host to PCI bridge (AGP disabled)> rev 0x02 on pci0.0.0
pcic0: <TI PCI-1250 PCI-CardBus Bridge> rev 0x02 int a irq 255 on pci0.2.0
TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa
irq]
pcic1: <TI PCI-1250 PCI-CardBus Bridge> rev 0x02 int b irq 255 on pci0.2.1
TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa
irq]
vga0: <Trident model 9397 VGA-compatible display device> rev 0xf3 int a
irq 11 on pci0.3.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-Master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
Probing for devices on PCI bus 1:
Probing for devices on PCI bus 2:
Probing for devices on PCI bus 3:
Probing for devices on PCI bus 4:
Probing for devices on PCI bus 5:
Probing for devices on PCI bus 6:
Probing for PnP devices:
>>> HANGS (the machine is frozen)
--------------- cut -------------
any ideas? It seems, the PnP stuff makes the problem?!
Bye
Stefan
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7bZrqV6joRB>