Date: Fri, 28 Dec 2001 10:27:09 -0500 From: Sam Drinkard <sam@wa4phy.net> To: freebsd-scsi@freebsd.org Subject: Second request for help. Message-ID: <3C2C8F4D.E8A9A296@vortex.wa4phy.net>
next in thread | raw e-mail | index | archive | help
Can someone tell me what's happening here? Is it hardware or maybe just a bad tape? The situation: All attempts to read/write/erase or even get status of any tape results in the error message below. The drive was working prior to my upgrade to 4.3-R, and now to 4.5-Pre. Have tried the card (2940 adaptec) in a windows machine with no luck either. Also have tried identical drive, new cable, same configuration, etc.. terminators are in place. At this time, I'm doing an erase, but the green led on the drive is not lit up. The amber led is, but not flashing. Any ideas/help appreciated. Sam sa0 at ahc0 bus 0 target 6 lun 0 sa0: <ARCHIVE 4326XX 27871-XXX 4.AO> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 15) Mounting root from ufs:/dev/ad0s1a (sa0:ahc0:0:6:0): SCB 0x2 - timed out ahc0: Dumping Card State while idle, at SEQADDR 0x8 ACCUM = 0x28, SINDEX = 0x67, DINDEX = 0x27, ARG_2 = 0x0 HCNT = 0x0 SCSISEQ = 0x12, SBLKCTL = 0x0 DFCNTRL = 0x0, DFSTATUS = 0x2d LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80 SSTAT0 = 0x5, SSTAT1 = 0xa STACK == 0x3, 0x186, 0x156, 0x0 SCB count = 10 Kernel NEXTQSCB = 3 Card NEXTQSCB = 3 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 0:2 QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Pending list: 2 Kernel Free SCB list: 4 5 6 7 8 9 1 0 Untagged Q(6): 2 sg[0] - Addr 0x460e000 : Length 4096 sg[1] - Addr 0x4eaf000 : Length 4096 (sa0:ahc0:0:6:0): Queuing a BDR SCB (sa0:ahc0:0:6:0): Bus Device Reset Message Sent (sa0:ahc0:0:6:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on A:6. 1 SCBs aborted (sa0:ahc0:0:6:0): unable to rewind after test read (sa0:ahc0:0:6:0): SCB 0x2 - timed out ahc0: Dumping Card State while idle, at SEQADDR 0x7 ACCUM = 0x4d, SINDEX = 0x67, DINDEX = 0x27, ARG_2 = 0x0 HCNT = 0x0 SCSISEQ = 0x12, SBLKCTL = 0x0 DFCNTRL = 0x0, DFSTATUS = 0x2d LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80 SSTAT0 = 0x5, SSTAT1 = 0xa STACK == 0x3, 0x186, 0x156, 0xe1 SCB count = 10 Kernel NEXTQSCB = 3 Card NEXTQSCB = 3 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 0:2 QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Pending list: 2 Kernel Free SCB list: 4 5 6 7 8 9 1 0 Untagged Q(6): 2 sg[0] - Addr 0x460e000 : Length 4096 sg[1] - Addr 0x4eaf000 : Length 4096 (sa0:ahc0:0:6:0): Queuing a BDR SCB (sa0:ahc0:0:6:0): Bus Device Reset Message Sent (sa0:ahc0:0:6:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on A:6. 1 SCBs aborted (sa0:ahc0:0:6:0): unable to rewind after test read To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C2C8F4D.E8A9A296>