Date: Wed, 15 Sep 2004 02:17:07 -0500 From: Scot Hetzel <swhetzel@gmail.com> To: freebsd-current@freebsd.org, sos@freebsd.org Subject: 5.3 BETA kernel hangs without debugging options Message-ID: <790a9fff04091500172a40bd13@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
I have been trying to track down a problem with the 5.3 BETA4 kernel
where it would hang after trying to sense my CD ROM drive. I have
found that disconnecting the CD ROM drive would allow it to boot the
kernel.
Durring my trouble shooting, I tried different version of the 6.x ata
driver on the 5.3-BETA4 kernel without any luck in getting it working.
NOTE: I have had to use the 6.x ata driver on my previous 5.3-BETA
kernels due to problems with crashes when detecting my CD-ROM drive
with the 5.3 ata driver. I kept the ata driver the same (6.x
08272004) thru-out all kernel builds to eliminate it as a suspect.
So far I have isolated the problem to the commit that removed the
debugging options from the 5.3 BETA GENERIC kernel.
# ident /sys/i386/conf/GENERIC
$FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.1 2004/09/07 23:49:57 scottl Exp $
The kernel without the debugging options would get to here and hang:
ATAPI_RESET time = 390us
ad0: 26105MB <WDC WD273BA/P78OA30A> [53040/16/63] at ata0-master BIOSPIO
acd0: WARNING - MODE_SENSE_BIG interrupt was seen but taskqueue stalled
I'm currently building a 5.3 BETA4 kernel with the debuging options enabled.
Any hints as to how I should proceed from here?
The full dmesg from a kernel with the debugging options enabled is below:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #13: Tue Sep 14 02:20:47 CDT 2004
root@bsd5x.hetzel.org:/usr/obj/usr/src/5x/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P54C (132.63-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (128 MB)
avail memory = 121700352 (116 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX WDMA2 controller> port
0x6000-0x600f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
fxp0: <Intel 82557 Pro/100 Ethernet> port 0x6020-0x603f mem
0xcc000000-0xcc0fffff,0xca000000-0xca000fff irq 11 at device 13.0 on
pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:85:b6:3c
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6400-0x64ff mem
0xcc200000-0xcc200fff irq 11 at device 14.0 on pci0
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci0: <display, VGA> at device 15.0 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcefff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio4: <U.S. Robotics 56K FAX INT> at port 0x2f8-0x2ff irq 3 on isa0
sio4: type 16550A
ahc1: No resources allocated.
Timecounter "TSC" frequency 132632624 Hz quality 800
Timecounters tick every 10.000 msec
ATAPI_RESET time = 1020us
ad0: 26105MB <WDC WD273BA/P78OA30A> [53040/16/63] at ata0-master BIOSPIO
acd0: WARNING - MODE_SENSE_BIG interrupt was seen but taskqueue stalled
acd0: WARNING - MODE_SENSE_BIG DONEDRQ non conformant device
acd0: WARNING - MODE_SENSE_BIG read data overrun 65535>5
acd0: WARNING no status, reselecting device
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: WARNING no status, reselecting device
acd0: WARNING no status, reselecting device
acd0: WARNING no status, reselecting device
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: CDROM <CD-ROM CDR-C3 G/1.30> at ata0-slave BIOSPIO
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
Mounting root from ufs:/dev/da0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 done
No buffers busy after final sync
Uptime: 4h9m23s
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #15: Tue Sep 14 22:49:27 CDT 2004
root@bsd5x.hetzel.org:/usr/obj/usr/src/5x/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P54C (132.63-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (128 MB)
avail memory = 121700352 (116 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX WDMA2 controller> port
0x6000-0x600f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
fxp0: <Intel 82557 Pro/100 Ethernet> port 0x6020-0x603f mem
0xcc000000-0xcc0fffff,0xca000000-0xca000fff irq 11 at device 13.0 on
pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:85:b6:3c
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6400-0x64ff mem
0xcc200000-0xcc200fff irq 11 at device 14.0 on pci0
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci0: <display, VGA> at device 15.0 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcefff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio4: <U.S. Robotics 56K FAX INT> at port 0x2f8-0x2ff irq 3 on isa0
sio4: type 16550A
ahc1: No resources allocated.
Timecounter "TSC" frequency 132632581 Hz quality 800
Timecounters tick every 10.000 msec
ATAPI_RESET time = 390us
ad0: 26105MB <WDC WD273BA/P78OA30A> [53040/16/63] at ata0-master BIOSPIO
acd0: WARNING - MODE_SENSE_BIG interrupt was seen but taskqueue stalled
acd0: WARNING - MODE_SENSE_BIG DONEDRQ non conformant device
acd0: WARNING - MODE_SENSE_BIG read data overrun 65535>5
acd0: WARNING no status, reselecting device
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: WARNING no status, reselecting device
acd0: WARNING no status, reselecting device
acd0: WARNING no status, reselecting device
acd0: WARNING no status, reselecting device
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: WARNING no status, reselecting device
acd0: WARNING no status, reselecting device
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: WARNING no status, reselecting device
acd0: timeout sending command=a0
acd0: error issuing ATA PACKET command
acd0: CDROM <CD-ROM CDR-C3 G/1.30> at ata0-slave BIOSPIO
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
Mounting root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?790a9fff04091500172a40bd13>