Date: Sat, 27 May 1995 22:45:30 -0400 (EDT) From: Gang-Ryung Uh <uh@grep.cs.fsu.edu> To: current@FreeBSD.org Subject: SoundBlaster 16 Message-ID: <199505280245.WAA12315@grep.cs.fsu.edu>
next in thread | raw e-mail | index | archive | help
Hi, all
I am running the FreeBSD-current(May 25). But I have a problem to
make my SoundBlaster 16 configured correctly by kernel.
---------------
The hardware setting for the audio interface is as follows,
base I/O address: 220H
Interrupt: 5
Low DMA channel: 1
High DMA channel: 6
So I change two things:
1) In the kernel configuration
# Controls all sound devices
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
-----
2) /usr/src/sys/i386/isa/sound/sound_config.h
#ifndef SBC_IRQ
#define SBC_IRQ 5 /* IQR7 is the factory default. */
#endif ---
Then I config and rebuild the kernel. Following is the dmesg for the sb0:
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster Pro 4.13>
---------------------
Is it different from SoundBlaster 16?
But if I do 'cat doh.au > /dev/audio', then there is no sound
coming out!!!
Thanks for your help.
Regards,
uh
uh@cs.fsu.edu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199505280245.WAA12315>