Date: Mon, 9 Oct 2000 21:44:33 +0200 From: Andreas Klemm <andreas@klemm.gtn.com> To: freebsd-xircom@lovett.com Cc: freebsd-mobile@freebsd.org Subject: Xircom RealPort Ethernet 10/100+Modem 56 (16 Bit card) (was:...) Message-ID: <20001009214433.A44865@titan.klemm.gtn.com> In-Reply-To: <20000925202706.D17872@supernews.net>; from ade@lovett.com on Mon, Sep 25, 2000 at 08:27:06PM -0500 References: <200009260100.TAA08428@harmony.village.org> <20000925202706.D17872@supernews.net>
index | next in thread | previous in thread | raw e-mail
On Mon, Sep 25, 2000 at 08:27:06PM -0500, Ade Lovett wrote:
> On a related note, do you have need for a RealPort REM56G-100
> ethernet/modem combo card?
Hi !
I also have some problems to get
Xircom RealPort Ethernet 10/100+Modem 56 (16 Bit card)
to run on FreeBSD 4.1.1-STABLE on a Toshiba Satellite Pro 4360.
It is recognized, but doesn't work here ...
Many debugging output, PHY o.k., but nothing comes through ...
Tried several IRQs 3,9,10
Tried to free IRQ 10, by compiling kernel, that uses
IRQ 11 for pcic0:
device card
#device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
Here the comconsole logs of the 3 boot trials ...
Kernel has debug level 2 compiled in for xe driver.
pccardc dumpcis output and pccard.conf entry at the end of the
file by cat'ting it to /dev/console (so I got the output via
comconsole ;-)
Maybe one kind soul can help
Thanks !
Andreas ///
ok boot
|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000
root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201195520 (196480K bytes)
avail memory = 192323584 (187816K bytes)
Preloaded elf kernel "kernel" at 0xc034e000.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022)
VESA: S3 Incorporated. M7 BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 0
swapon: adding /dev/ad0s3b as swap device
Automatic boot in progress...
/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4% fragmentation)
/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 253630 free (110 frags, 31690 blocks, 0.0% fragmentation)
PCCARD Memory address set to 0xd0000
Enable PC-card.xe0: xe: Probing
xe0: Got version string (0x15)
xe0: Got card ID (0x20)
xe0: Card is Ethernet/modem combo
xe0: Got MAC address (0x22)
xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 3 slot 0 on pccard0
xe0: attach
xe0: Finding an aligned port for RealPort
xe0: Hacking your Realport, master
xe0: Realport port 0x100, size 0x10
xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:bb:11:e8
route: writing to routing socket: Network is unreachable
Doing initial network setup: hostname.
xe0: media_status
xe0: media_change
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
lo0: flags=8049<xUP,LOOPBACK,RUNNeING,MULTICAST> m0tu 16384
: inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2
edia_status
inet6 ::1 prefixxlen 128
inete 127.0.0.1 netma0sk 0xff000000
:xe0: flags=8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d
inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255
isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9
ether 00s:10:a4:bb:11:e8
media: 10baseT/UTP
supported media: autoselect 10baseT/UTP 100baseTX
add net default: gateway 172.16.2.2
Additional routing options: tcp extensions=NO TCP keepalive=YES.
routing daemons:.
additional daemons: syslogd.
Doing additional network setup: portmap.
Starting final network daemons: nfsiod NFS access cache time=2.
setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
starting standard daemons: inetd cron sshd.
Initial rc.i386 initialization: apm apmd.
rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
additional ABI support:.
Local package initialization:.
Additional TCP options:.
Mon Oct 9 21:18:05 CEST 2000
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: media_status
xe0: media_status
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: media_status
xe0: media_status
xe0: media_status
xe0: media_status
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 10 1
done
Uptime: 5m7s
Rebooting...
ok boot
|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000
root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201195520 (196480K bytes)
avail memory = 192323584 (187816K bytes)
Preloaded elf kernel "kernel" at 0xc034e000.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022)
VESA: S3 Incorporated. M7 BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 0
swapon: adding /dev/ad0s3b as swap device
Automatic boot in progress...
/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4% fragmentation)
/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 253614 free (118 frags, 31687 blocks, 0.0% fragmentation)
PCCARD Memory address set to 0xd0000
Enable PC-card.xe0: xe: Probing
xe0: Got version string (0x15)
xe0: Got card ID (0x20)
xe0: Card is Ethernet/modem combo
xe0: Got MAC address (0x22)
xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 9 slot 0 on pccard0
xe0: attach
xe0: Finding an aligned port for RealPort
xe0: Hacking your Realport, master
xe0: Realport port 0x100, size 0x10
xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:bb:11:e8
route: writing to routing socket: Network is unreachable
Doing initial network setup: hostname.
xe0: media_status
xe0: media_change
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
lo0: flags=8049<xUP,LOOPBACK,RUNNeING,MULTICAST> m0tu 16384
: inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2
edia_status
inet6 ::1 prefixxlen 128
inete 127.0.0.1 netma0sk 0xff000000
:xe0: flags=8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d
inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255
isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9
ether 00s:10:a4:bb:11:e8
media: 10baseT/UTP
supported media: autoselect 10baseT/UTP 100baseTX
add net default: gateway 172.16.2.2
Additional routing options: tcp extensions=NO TCP keepalive=YES.
routing daemons:.
additional daemons: syslogd.
Doing additional network setup: portmap.
Starting final network daemons: nfsiod NFS access cache time=2.
setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
starting standard daemons: inetd cron sshd.
Initial rc.i386 initialization: apm apmd.
rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
additional ABI support:.
Local package initialization:.
Additional TCP options:.
Mon Oct 9 21:23:46 CEST 2000
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: media_status
xe0: media_status
xe0: media_status
xe0: media_status
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 10 1
done
Uptime: 1m22s
Rebooting...
ok boot
|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-20001003-STABLE #1: Mon Oct 9 07:58:58 CEST 2000
root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201195520 (196480K bytes)
avail memory = 192323584 (187816K bytes)
Preloaded elf kernel "kernel" at 0xc034e000.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0da2 (1000022)
VESA: S3 Incorporated. M7 BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s3a
swapon: adding /dev/ad0s3b as swap device
Automatic boot in progress...
/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f: clean, 2377352 free (68312 frags, 288630 blocks, 2.4% fragmentation)
/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 253598 free (110 frags, 31686 blocks, 0.0% fragmentation)
PCCARD Memory address set to 0xd0000
Enable PC-card.xe0: xe: Probing
xe0: Got version string (0x15)
xe0: Got card ID (0x20)
xe0: Card is Ethernet/modem combo
xe0: Got MAC address (0x22)
xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0
xe0: attach
xe0: Finding an aligned port for RealPort
xe0: Cannot allocate irq
device_probe_and_attach: xe0 attach returned 12
Doing initial network setup: hostname.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
route: writing to routing socket: Network is unreachable
add net default: gateway 172.16.2.2: Network is unreachable
Additional routing options: tcp extensions=NO TCP keepalive=YES.
routing daemons:.
additional daemons: syslogd.
Doing additional network setup: portmap.
Starting final network daemons: nfsiod NFS access cache time=2.
setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
starting standard daemons: inetd cron sshd.
Initial rc.i386 initialization: apm apmd.
rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
additional ABI support:.
Local package initialization:.
Additional TCP options:.
Mon Oct 9 21:26:14 CEST 2000
Oct 9 21:31:46 titan syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 7
done
Uptime: 6m11s
Rebooting...
ok boot
|/-\|/-Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-20001003-STABLE #0: Mon Oct 9 21:31:12 CEST 2000
root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201195520 (196480K bytes)
avail memory = 192323584 (187816K bytes)
Preloaded elf kernel "kernel" at 0xc034e000.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02f0d62 (1000022)
VESA: S3 Incorporated. M7 BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 11 on isa0
pcic0: management irq 13
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 0
swapon: adding /dev/ad0s3b as swap device
Automatic boot in progress...
/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 31350 free (174 frags, 3897 blocks, 0.3% fragmentation)
/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f: clean, 2370864 free (68000 frags, 287858 blocks, 2.4% fragmentation)
/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 253588 free (108 frags, 31685 blocks, 0.0% fragmentation)
PCCARD Memory address set to 0xd0000
Enable PC-card.xe0: xe: Probing
xe0: Got version string (0x15)
xe0: Got card ID (0x20)
xe0: Card is Ethernet/modem combo
xe0: Got MAC address (0x22)
xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0
xe0: attach
xe0: Finding an aligned port for RealPort
xe0: Hacking your Realport, master
xe0: Realport port 0x100, size 0x10
xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:bb:11:e8
route: writing to routing socket: Network is unreachable
Doing initial network setup: hostname.
xe0: media_status
xe0: media_change
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
lo0: flags=8049<xUP,LOOPBACK,RUNNeING,MULTICAST> m0tu 16384
: inet6 fe80::1%l o0 prefixlen 64 mscopeid 0x2
edia_status
inet6 ::1 prefixxlen 128
inete 127.0.0.1 netma0sk 0xff000000
:xe0: flags=8843< UP,BROADCAST,RUNmNING,SIMPLEX,MULeTICAST> mtu 1500d
inet 172.16.2i.4 netmask 0xfffafff00 broadcast _172.16.2.255
isnet6 fe80::210:at4ff:febb:11e8%xea0 prefixlen 64 ttentative scopeidu 0x9
ether 00s:10:a4:bb:11:e8
media: 10baseT/UTP
supported media: autoselect 10baseT/UTP 100baseTX
add net default: gateway 172.16.2.2
Additional routing options: tcp extensions=NO TCP keepalive=YES.
routing daemons:.
additional daemons: syslogd.
Doing additional network setup: portmap.
Starting final network daemons: nfsiod NFS access cache time=2.
setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
setting a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
starting standard daemons: inetd cron sshd.
Initial rc.i386 initialization: apm apmd.
rc.i386 configuring syscons: keymap keyrate blank_time screensaver moused.
additional ABI support:.
Local package initialization:.
Additional TCP options:.
Mon Oct 9 21:33:07 CEST 2000
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
xe0: watchdog timeout; resetting card
xe0: stop
xe0: disable_intr
xe0: hard_reset
xe0: setmedia
xe0: disable_intr
xe0: soft_reset
xe0: silicon revision = 5
xe0: disable_intr
xe0: PHY OK!
xe0: MII registers: 0:3400 1:7809 4:01e1 5:0000 6:0000
xe0: Selecting 10baseT
xe0: Setting LEDs
xe0: init
xe0: enable_intr
xe0: init
xe0: enable_intr
Code 136 not found
Code 136 not found
code Unknown ignored
Code 138 not found
Code 138 not found
code Unknown ignored
Code 139 not found
Code 139 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 59
000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
010: 61 72 64 20 45 74 68 65 72 6e 65 74 20 31 30 2f
020: 31 30 30 20 2b 20 4d 6f 64 65 6d 20 35 36 00 43
030: 45 4d 35 36 00 31 2e 30 30 00 ff
Version = 5.0, Manuf = [Xircom], card vers = [CreditCard Ethernet 10/100 + Modem 56]
Addit. info = [CEM56],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: e8 11 bb 00 00 00 00 00
Tuple #5, code = 0x20 (Manufacturer ID), length = 5
000: 05 01 0a 11 46
PCMCIA ID = 0x105, OEM ID = 0x110a
Tuple #6, code = 0x44 (Card init date), length = 4
000: 41 43 a1 28
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 3f 80 ff 67
Reg len = 2, config register addr = 0xff80, last config = 0x3f
Registers: XXX--XX-
Tuple #8, code = 0x1b (Configuration entry), length = 20
000: e7 c1 9d 0f 55 4d 5d 4e e0 17 17 ea 60 e8 02 07
010: f0 bc 8e 20
Config index = 0x27(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 4.5 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x2e8 block length = 0x8
IRQ modes: Level, Pulse, Shared
IRQs: 2 3 4 5 7 9 10 11 15
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 1f 08 ea 60 e8 03 07
Config index = 0x1f
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 17 08 ea 60 f8 02 07
Config index = 0x17
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 0f 08 ea 60 f8 03 07
Config index = 0xf
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x3f8 block length = 0x8
Tuple #12, code = 0x1b (Configuration entry), length = 3
000: 3f 08 63
Config index = 0x3f
Card decodes 3 address lines, full 8/16 Bit I/O
Tuple #13, code = 0x21 (Functional ID), length = 2
000: 02 00
Serial port/modem
Tuple #14, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even
Data bit - 7bit,8bit, Stop bit - 1bit,2bit
Tuple #15, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5
Data modem services available:
Tuple #16, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 0b 00 02 00 b5
Fax1/modem services available:
Tuple #17, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #18, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 10 a4 bb 11 e8
Network node ID: 00 10 a4 bb 11 e8
Tuple #19, code = 0x0 (Null tuple), length = 12
000: 32 30 30 31 48 57 42 42 31 31 45 38
Tuple #20, code = 0x0 (Null tuple), length = 4
000: 01 00 00 00
Tuple #21, code = 0x14 (No link), length = 0
Tuple #22, code = 0xff (Terminator), length = 0
2 slots found
# Default PCCARD configuration file
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards. So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# IRQ == 0 means "allocate free IRQ from IRQ pool"
# IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
#
# $FreeBSD: src/etc/defaults/pccard.conf,v 1.98.2.5 2000/09/22 10:12:08 sanpei Exp $
#
# Send new entries for this file to imp@freebsd.org. He's volunteered
# to act as coordinator for this file.
#
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 5 9 10 11 15
# Available memory slots
memory 0xd4000 96k
# Xircom Realport card + modem
card "Xircom" "16-bit Ethernet + Modem 56"
config 0x27 "xe" 9
insert /etc/pccard_ether $device
remove /etc/pccard_ether $device delete
# Xircom CreditCard Ethernet 10/100
card "Xircom" "CreditCard 10/100"
config 0x1 "xe" ?
insert /etc/pccard_ether $device
remove /etc/pccard_ether $device delete
# Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10)
card "Xircom" "CreditCard 10Base-T"
config auto "xe" ?
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
# Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"
config 0x27 "xe" 10
insert /etc/pccard_ether $device
remove /sbin/ifconfig $device delete
machine i386
cpu I686_CPU
ident LAPTOP
maxusers 100
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? flags 0x20
# PCCARD (PCMCIA) support
device card
#device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
device pcic0 at isa? irq 11 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
#device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable port IO_COM3 irq 5
#device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
# Xircom Ethernet
device xe
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
options INCLUDE_CONFIG_FILE # Include this file in kernel
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpf)
options MROUTING # Multicast routing
# To include support for VESA video modes
options VESA
#device pcm0 at isa? irq 10 drq 1 flags 0x0
device pcm
--
Andreas Klemm Powered by FreeBSD SMP
Songs from our band >>64Bits<<............http://www.apsfilter.org/64bits.html
My homepage................................ http://people.FreeBSD.ORG/~andreas
Please note: Apsfilter got a NEW HOME................http://www.apsfilter.org/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001009214433.A44865>