Date: Tue, 11 Jan 2005 12:06:28 +0800 From: "Rene C. Mendoza" <rene.mendoza@activeinvitesoftware.com> To: Gable Barber <gablebarber@gmail.com> Cc: questions@freebsd.org Subject: Re: Onboard sound problem - FBSD 5.2.1 - Epox 8kta3 Message-ID: <41E350C4.4010609@activeinvitesoftware.com> In-Reply-To: <aab166ce050110175170691b5c@mail.gmail.com> References: <aab166ce050110175170691b5c@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Have you added this line to your kernel config? device pcm I think you need this line to enable sound. Gable Barber wrote: >I recompiled kernel to include' options PNPBIOS ' ... per the Handbook. > >>From the motherboard manual: > >Epox 8kta3 motherboard >VIA kt133a >built in AC97 (by vt82c686b) > >output of uname : > >bash-2.05b$ uname -a >FreeBSD home.localdomain 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Sun >Jan 9 09:07:26 CST 2005 gable@home.localdomain >:/usr/src/sys/i386/compile/MYKERNEL i386 >bash-2.05b$ > > > >output of dmesg : > >bash-2.05b$ dmesg >Copyright (c) 1992-2004 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 5.2.1-RELEASE #0: Sun Jan 9 09:07:26 CST 2005 > gable@home.localdomain :/usr/src/sys/i386/compile/MYKERNEL >Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000. >Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4. >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: AMD Athlon(tm) processor (1403.19-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> >real memory = 872349696 (831 MB) >avail memory = 837726208 (798 MB) >Pentium Pro MTRR support enabled >npx0: [FAST] >npx0: <math processor> on motherboard >npx0: INT 16 interface >acpi0: <VIA694 AWRDACPI> on motherboard >pcibios: BIOS version 2.10 >Using $PIR table, 9 entries at 0xc00fde40 >acpi0: Power Button (fixed) >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 >acpi_cpu0: <CPU> on acpi0 >acpi_button0: <Power Button> on acpi0 >pcib0: <ACPI Host-PCI bridge> port >0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on >acpi0 >pci0: <ACPI PCI bus> on pcib0 >pcib0: slot 7 INTD is routed to irq 11 >pcib0: slot 7 INTD is routed to irq 11 >pcib0: slot 7 INTC is routed to irq 12 >pcib0: slot 13 INTA is routed to irq 11 >agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem >0xd0000000-0xd7ffffff at device 0.0 on pci0 >pcib1: <PCI-PCI bridge> at device 1.0 on pci0 >pci1: <PCI bus> on pcib1 >pcib0: slot 1 INTA is routed to irq 10 >pcib1: slot 0 INTA is routed to irq 10 >pci1: <display, VGA> at device 0.0 (no driver attached) >isab0: <PCI-ISA bridge> at device 7.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <VIA 82C686B UDMA100 controller> port 0xd000-0xd00f at device >7.1 on pci0 >atapci0: Correcting VIA config for southbridge data corruption bug >ata0: at 0x1f0 irq 14 on atapci0 >ata0: [MPSAFE] >ata1: at 0x170 irq 15 on atapci0 >ata1: [MPSAFE] >uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device >7.2 on pci0 >usb0: <VIA 83C572 USB controller> on uhci0 >usb0: USB revision 1.0 >uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >ums0: Kensington Kensington USB/PS2 Wheel Mouse, rev 1.10/1.00, addr >2, iclass 3/1 >ums0: 3 buttons and Z dir. >uhub1: ORTEK ORTEK KH12 USB Hub, class 9/0, rev 1.10/3.00, addr 3 >uhub1: 3 ports with 2 removable, bus powered >ukbd0: ORTEK USB Hub/Keyboard, rev 1.10/3.00, addr 4, iclass 3/1 >kbd0 at ukbd0 >uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device >7.3 on pci0 >usb1: <VIA 83C572 USB controller> on uhci1 >usb1: USB revision 1.0 >uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub2: 2 ports with 2 removable, self powered >pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached) >pci0: <multimedia, audio> at device 7.5 (no driver attached) >dc0: <ADMtek AN985 10/100BaseTX> port 0xe800-0xe8ff mem >0xe9000000-0xe90003ff irq 11 at device 13.0 on pci0 >dc0: Ethernet address: 00:04:5a:7d:96:c5 >miibus0: <MII bus> on dc0 >ukphy0: <Generic IEEE 802.3u media interface> on miibus0 >ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port >0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 >fdc0: FIFO enabled, 8 bytes threshold >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >sio0 port 0x3f8-0x3ff irq 4 on acpi0 >sio0: type 16550A >sio1 port 0x2f8-0x2ff irq 3 on acpi0 >sio1: type 16550A >ppc0 port 0x378-0x37f irq 7 on acpi0 >ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode >ppbus0: <Parallel port bus> on ppc0 >plip0: <PLIP network interface> on ppbus0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 >pmtimer0 on isa0 >atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >Timecounter "TSC" frequency 1403191078 Hz quality 800 >Timecounters tick every 10.000 msec >acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% >GEOM: create disk ad1 dp=0xc6520e60 >ad1: 39266MB <IC35L040AVVN07-0> [79780/16/63] at ata0-slave UDMA100 >acd0: CDROM <FX120T> at ata1-master PIO3 >Mounting root from ufs:/dev/ad1s1a >drm0: <3dfx Voodoo5> port 0xc000-0xc0ff mem >0xd8000000-0xdfffffff,0xe0000000-0xe3ffffff irq 10 at device 0.0 on >pci1 >info: [drm] Initialized tdfx 1.0.0 20010216 on minor 0 >bash-2.05b$ > > > >Is this the important part...? > >pci0: <multimedia, audio> at device 7.5 (no driver attached) > >Any help is greatly appreciated.... > >Thank you, >Gable Barber >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41E350C4.4010609>